diff mbox series

[v2,2/2] phy: rockchip: inno-usb2: Add usb2 phy support for rk3562

Message ID 20250415050005.52773-2-kever.yang@rock-chips.com
State New
Headers show
Series [v2,1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3562 | expand

Commit Message

Kever Yang April 15, 2025, 5 a.m. UTC 
From: Frank Wang <frank.wang@rock-chips.com>

RK3652 has one USB2.0 PHY with two ports, the OTG port support OTG
and BC1.2, the SoC provide USB GRF and APB to access the registers.

This adds vbus detection function control and make the below tuning
to enhance the usb2-phy SQ for RK3562 SoC.
 - enable pre-emphasis during non-chirp phase
 - set HS eye height to 425mv

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

Changes in v2:
- Update the commit msg and collect review tag;

 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index b5e6a864deeb..ada1f02601ef 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1892,6 +1892,54 @@  static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3562_phy_cfgs[] = {
+	{
+		.reg = 0xff740000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0110, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x0114, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x0118, 2, 2, 0, 1 },
+				.idfall_det_en	= { 0x0110, 5, 5, 0, 1 },
+				.idfall_det_st	= { 0x0114, 5, 5, 0, 1 },
+				.idfall_det_clr = { 0x0118, 5, 5, 0, 1 },
+				.idrise_det_en	= { 0x0110, 4, 4, 0, 1 },
+				.idrise_det_st	= { 0x0114, 4, 4, 0, 1 },
+				.idrise_det_clr = { 0x0118, 4, 4, 0, 1 },
+				.ls_det_en	= { 0x0110, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0114, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0118, 0, 0, 0, 1 },
+				.utmi_avalid	= { 0x0120, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x0120, 9, 9, 0, 1 },
+				.utmi_ls	= { 0x0120, 5, 4, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0104, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0110, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0114, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0118, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x0120, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x0120, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.cp_det		= { 0x0120, 24, 24, 0, 1 },
+			.dcp_det	= { 0x0120, 23, 23, 0, 1 },
+			.dp_det		= { 0x0120, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
 	{
 		.reg = 0xfe8a0000,
@@ -2210,6 +2258,7 @@  static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{ .compatible = "rockchip,rk3562-usb2phy", .data = &rk3562_phy_cfgs },
 	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
 	{ .compatible = "rockchip,rk3576-usb2phy", .data = &rk3576_phy_cfgs },
 	{ .compatible = "rockchip,rk3588-usb2phy", .data = &rk3588_phy_cfgs },