diff mbox series

[v3,4/6] PCI: qcom: Add support for IPQ5018

Message ID DS7PR19MB8883AB310FF217F669FE32939DCB2@DS7PR19MB8883.namprd19.prod.outlook.com
State New
Headers show
Series Enable IPQ5018 PCI support | expand

Commit Message

George Moussalem March 5, 2025, 1:41 p.m. UTC 
From: Sricharan Ramabadhran <quic_srichara@quicinc.com>

Add IPQ5018 platform with is based on Qcom IP rev. 2.9.0
and Synopsys IP rev. 5.00a.

The platform itself has two PCIe Gen2 controllers: one single-lane and
one dual-lane. So let's add the IPQ5018 compatible and re-use 2_9_0 ops.

Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index e4d3366ead1f..94800c217d1d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1840,6 +1840,7 @@  static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-apq8064", .data = &cfg_2_1_0 },
 	{ .compatible = "qcom,pcie-apq8084", .data = &cfg_1_0_0 },
 	{ .compatible = "qcom,pcie-ipq4019", .data = &cfg_2_4_0 },
+	{ .compatible = "qcom,pcie-ipq5018", .data = &cfg_2_9_0 },
 	{ .compatible = "qcom,pcie-ipq6018", .data = &cfg_2_9_0 },
 	{ .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 },
 	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },