new file mode 100644
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin970 USB PHY
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |+
+ Bindings for USB3 PHY on HiSilicon Kirin 970.
+
+properties:
+ compatible:
+ const: hisilicon,hi3670-usb-phy
+
+ "#phy-cells":
+ const: 0
+
+ hisilicon,pericrg-syscon:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: phandle of syscon used to control iso refclk.
+
+ hisilicon,pctrl-syscon:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: phandle of syscon used to control usb tcxo.
+
+ hisilicon,sctrl-syscon:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: phandle of syscon used to control phy deep sleep.
+
+ hisilicon,eye-diagram-param:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Eye diagram for phy.
+
+ hisilicon,tx-vboost-lvl:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: TX level vboost for phy.
+
+required:
+ - compatible
+ - hisilicon,pericrg-syscon
+ - hisilicon,pctrl-syscon
+ - hisilicon,sctrl-syscon
+ - hisilicon,eye-diagram-param
+ - hisilicon,tx-vboost-lvl
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb3_otg_bc: usb3_otg_bc@ff200000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+
+ usb_phy {
+ compatible = "hisilicon,hi3670-usb-phy";
+ #phy-cells = <0>;
+ hisilicon,pericrg-syscon = <&crg_ctrl>;
+ hisilicon,pctrl-syscon = <&pctrl>;
+ hisilicon,sctrl-syscon = <&sctrl>;
+ hisilicon,eye-diagram-param = <0xfdfee4>;
+ hisilicon,tx-vboost-lvl = <0x5>;
+ };
+ };
+ };
@@ -18859,7 +18859,7 @@ L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/roles/intel-xhci-usb-role-switch.c
-USB IP DRIVER FOR HISILICON KIRIN
+USB IP DRIVER FOR HISILICON KIRIN 960
M: Yu Chen <chenyu56@huawei.com>
M: Binghui Wang <wangbinghui@hisilicon.com>
L: linux-usb@vger.kernel.org
@@ -18867,6 +18867,13 @@ S: Maintained
F: Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
F: drivers/phy/hisilicon/phy-hi3660-usb3.c
+USB IP DRIVER FOR HISILICON KIRIN 970
+M: Mauro Carvalho Chehab <mchehab@kernel.org>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
+F: drivers/phy/hisilicon/phy-kirin970-usb3.c
+
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
@@ -23,6 +23,16 @@ config PHY_HI3660_USB
To compile this driver as a module, choose M here.
+config PHY_HI3670_USB
+ tristate "hi3670 USB PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI3670 USB PHY.
+
+ To compile this driver as a module, choose M here.
+
config PHY_HISTB_COMBPHY
tristate "HiSilicon STB SoCs COMBPHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o
+obj-$(CONFIG_PHY_HI3670_USB) += phy-hi3670-usb3.o
obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
new file mode 100644
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Phy provider for USB 3.1 controller on HiSilicon Kirin970 platform
+ *
+ * Copyright (C) 2017-2020 Hilisicon Electronics Co., Ltd.
+ * http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define SCTRL_SCDEEPSLEEPED (0x0)
+#define USB_CLK_SELECTED BIT(20)
+
+#define PERI_CRG_PEREN0 (0x00)
+#define PERI_CRG_PERDIS0 (0x04)
+#define PERI_CRG_PEREN4 (0x40)
+#define PERI_CRG_PERDIS4 (0x44)
+#define PERI_CRG_PERRSTEN4 (0x90)
+#define PERI_CRG_PERRSTDIS4 (0x94)
+#define PERI_CRG_ISODIS (0x148)
+#define PERI_CRG_PEREN6 (0x410)
+#define PERI_CRG_PERDIS6 (0x414)
+
+#define USB_REFCLK_ISO_EN BIT(25)
+
+#define GT_CLK_USB2PHY_REF BIT(19)
+
+#define PCTRL_PERI_CTRL3 (0x10)
+#define PCTRL_PERI_CTRL3_MSK_START (16)
+#define USB_TCXO_EN BIT(1)
+
+#define PCTRL_PERI_CTRL24 (0x64)
+#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
+
+#define USB3OTG_CTRL0 (0x00)
+#define USB3OTG_CTRL3 (0x0c)
+#define USB3OTG_CTRL4 (0x10)
+#define USB3OTG_CTRL5 (0x14)
+#define USB3OTG_CTRL7 (0x1c)
+#define USB_MISC_CFG50 (0x50)
+#define USB_MISC_CFG54 (0x54)
+#define USB_MISC_CFG58 (0x58)
+#define USB_MISC_CFG5C (0x5c)
+#define USB_MISC_CFGA0 (0xa0)
+#define TCA_CLK_RST (0x200)
+#define TCA_INTR_EN (0x204)
+#define TCA_INTR_STS (0x208)
+#define TCA_GCFG (0x210)
+#define TCA_TCPC (0x214)
+#define TCA_SYSMODE_CFG (0x218)
+#define TCA_VBUS_CTRL (0x240)
+
+#define CTRL0_USB3_VBUSVLD BIT(7)
+#define CTRL0_USB3_VBUSVLD_SEL BIT(6)
+
+#define CTRL3_USB2_VBUSVLDEXT0 BIT(6)
+#define CTRL3_USB2_VBUSVLDEXTSEL0 BIT(5)
+
+#define CTRL5_USB2_SIDDQ BIT(0)
+
+#define CTRL7_USB2_REFCLKSEL_MASK GENMASK(4, 3)
+#define CTRL7_USB2_REFCLKSEL_ABB (BIT(4) | BIT(3))
+#define CTRL7_USB2_REFCLKSEL_PAD BIT(4)
+
+#define CFG50_USB3_PHY_TEST_POWERDOWN BIT(23)
+
+#define CFG54_USB31PHY_CR_ADDR_MASK GENMASK(31, 16)
+
+#define CFG54_USB3PHY_REF_USE_PAD BIT(12)
+#define CFG54_PHY0_PMA_PWR_STABLE BIT(11)
+#define CFG54_PHY0_PCS_PWR_STABLE BIT(9)
+#define CFG54_USB31PHY_CR_ACK BIT(7)
+#define CFG54_USB31PHY_CR_WR_EN BIT(5)
+#define CFG54_USB31PHY_CR_SEL BIT(4)
+#define CFG54_USB31PHY_CR_RD_EN BIT(3)
+#define CFG54_USB31PHY_CR_CLK BIT(2)
+#define CFG54_USB3_PHY0_ANA_PWR_EN BIT(1)
+
+#define CFG58_USB31PHY_CR_DATA_MASK GENMASK(31, 16)
+
+#define CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN BIT(1)
+
+#define CFGA0_VAUX_RESET BIT(9)
+#define CFGA0_USB31C_RESET BIT(8)
+#define CFGA0_USB2PHY_REFCLK_SELECT BIT(4)
+#define CFGA0_USB3PHY_RESET BIT(1)
+#define CFGA0_USB2PHY_POR BIT(0)
+
+#define INTR_EN_XA_TIMEOUT_EVT_EN BIT(1)
+#define INTR_EN_XA_ACK_EVT_EN BIT(0)
+
+#define CLK_RST_TCA_REF_CLK_EN BIT(1)
+#define CLK_RST_SUSPEND_CLK_EN BIT(0)
+
+#define GCFG_ROLE_HSTDEV BIT(4)
+#define GCFG_OP_MODE GENMASK(1, 0)
+#define GCFG_OP_MODE_CTRL_SYNC_MODE BIT(0)
+
+#define TCPC_VALID BIT(4)
+#define TCPC_LOW_POWER_EN BIT(3)
+#define TCPC_MUX_CONTROL_MASK GENMASK(1, 0)
+#define TCPC_MUX_CONTROL_USB31 BIT(0)
+
+#define SYSMODE_CFG_TYPEC_DISABLE BIT(3)
+
+#define VBUS_CTRL_POWERPRESENT_OVERRD GENMASK(3, 2)
+#define VBUS_CTRL_VBUSVALID_OVERRD GENMASK(1, 0)
+
+#define KIRIN970_USB_DEFAULT_PHY_PARAM (0xfdfee4)
+#define KIRIN970_USB_DEFAULT_PHY_VBOOST (0x5)
+
+#define TX_VBOOST_LVL_REG (0xf)
+#define TX_VBOOST_LVL_START (6)
+#define TX_VBOOST_LVL_ENABLE BIT(9)
+
+struct hi3670_priv {
+ struct device *dev;
+ struct regmap *peri_crg;
+ struct regmap *pctrl;
+ struct regmap *sctrl;
+ struct regmap *usb31misc;
+
+ u32 eye_diagram_param;
+ u32 tx_vboost_lvl;
+
+ u32 peri_crg_offset;
+ u32 pctrl_offset;
+ u32 usb31misc_offset;
+};
+
+static int hi3670_phy_cr_clk(struct regmap *usb31misc)
+{
+ int ret;
+
+ /* Clock up */
+ ret = regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_CLK, CFG54_USB31PHY_CR_CLK);
+ if (ret)
+ return ret;
+
+ /* Clock down */
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_CLK, 0);
+}
+
+static int hi3670_phy_cr_set_sel(struct regmap *usb31misc)
+{
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_SEL, CFG54_USB31PHY_CR_SEL);
+}
+
+static int hi3670_phy_cr_start(struct regmap *usb31misc, int direction)
+{
+ int ret, reg;
+
+ if (direction)
+ reg = CFG54_USB31PHY_CR_WR_EN;
+ else
+ reg = CFG54_USB31PHY_CR_RD_EN;
+
+ ret = regmap_update_bits(usb31misc, USB_MISC_CFG54, reg, reg);
+
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_RD_EN | CFG54_USB31PHY_CR_WR_EN, 0);
+}
+
+static int hi3670_phy_cr_wait_ack(struct regmap *usb31misc)
+{
+ u32 reg;
+ int retry = 10;
+ int ret;
+
+ while (retry-- > 0) {
+ ret = regmap_read(usb31misc, USB_MISC_CFG54, ®);
+ if (ret)
+ return ret;
+ if ((reg & CFG54_USB31PHY_CR_ACK) == CFG54_USB31PHY_CR_ACK)
+ return 0;
+
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+
+ usleep_range(10, 20);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int hi3670_phy_cr_set_addr(struct regmap *usb31misc, u32 addr)
+{
+ u32 reg;
+ int ret;
+
+ ret = regmap_read(usb31misc, USB_MISC_CFG54, ®);
+ if (ret)
+ return ret;
+
+ reg = FIELD_PREP(CFG54_USB31PHY_CR_ADDR_MASK, addr);
+
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_ADDR_MASK, reg);
+}
+
+static int hi3670_phy_cr_read(struct regmap *usb31misc, u32 addr, u32 *val)
+{
+ int reg, i, ret;
+
+ for (i = 0; i < 100; i++) {
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+ }
+
+ ret = hi3670_phy_cr_set_sel(usb31misc);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_set_addr(usb31misc, addr);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_start(usb31misc, 0);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_wait_ack(usb31misc);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(usb31misc, USB_MISC_CFG58, ®);
+ if (ret)
+ return ret;
+
+ *val = FIELD_GET(CFG58_USB31PHY_CR_DATA_MASK, reg);
+
+ return 0;
+}
+
+static int hi3670_phy_cr_write(struct regmap *usb31misc, u32 addr, u32 val)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < 100; i++) {
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+ }
+
+ ret = hi3670_phy_cr_set_sel(usb31misc);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_set_addr(usb31misc, addr);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(usb31misc, USB_MISC_CFG58,
+ FIELD_PREP(CFG58_USB31PHY_CR_DATA_MASK, val));
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_start(usb31misc, 1);
+ if (ret)
+ return ret;
+
+ return hi3670_phy_cr_wait_ack(usb31misc);
+}
+
+static int hi3670_phy_set_params(struct hi3670_priv *priv)
+{
+ u32 reg;
+ int ret;
+ int retry = 3;
+
+ ret = regmap_write(priv->usb31misc, USB3OTG_CTRL4,
+ priv->eye_diagram_param);
+ if (ret) {
+ dev_err(priv->dev, "set USB3OTG_CTRL4 failed\n");
+ return ret;
+ }
+
+ while (retry-- > 0) {
+ ret = hi3670_phy_cr_read(priv->usb31misc,
+ TX_VBOOST_LVL_REG, ®);
+ if (!ret)
+ break;
+
+ if (ret != -ETIMEDOUT) {
+ dev_err(priv->dev, "read TX_VBOOST_LVL_REG failed\n");
+ return ret;
+ }
+ }
+ if (ret)
+ return ret;
+
+ reg |= (TX_VBOOST_LVL_ENABLE | (priv->tx_vboost_lvl << TX_VBOOST_LVL_START));
+ ret = hi3670_phy_cr_write(priv->usb31misc, TX_VBOOST_LVL_REG, reg);
+ if (ret)
+ dev_err(priv->dev, "write TX_VBOOST_LVL_REG failed\n");
+
+ return ret;
+}
+
+static bool hi3670_is_abbclk_selected(struct hi3670_priv *priv)
+{
+ u32 reg;
+
+ if (!priv->sctrl) {
+ dev_err(priv->dev, "priv->sctrl is null!\n");
+ return false;
+ }
+
+ if (regmap_read(priv->sctrl, SCTRL_SCDEEPSLEEPED, ®)) {
+ dev_err(priv->dev, "SCTRL_SCDEEPSLEEPED read failed!\n");
+ return false;
+ }
+
+ if ((reg & USB_CLK_SELECTED) == 0)
+ return false;
+
+ return true;
+}
+
+static int hi3670_config_phy_clock(struct hi3670_priv *priv)
+{
+ u32 val, mask;
+ int ret;
+
+ if (!hi3670_is_abbclk_selected(priv)) {
+ /* usb refclk iso disable */
+ ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS,
+ USB_REFCLK_ISO_EN);
+ if (ret)
+ goto out;
+
+ /* enable usb_tcxo_en */
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
+ USB_TCXO_EN |
+ (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START));
+
+ /* select usbphy clk from abb */
+ mask = SC_CLK_USB3PHY_3MUX1_SEL;
+ ret = regmap_update_bits(priv->pctrl,
+ PCTRL_PERI_CTRL24, mask, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
+ CFGA0_USB2PHY_REFCLK_SELECT, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
+ if (ret)
+ goto out;
+ val &= ~CTRL7_USB2_REFCLKSEL_MASK;
+ val |= CTRL7_USB2_REFCLKSEL_ABB;
+ ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
+ if (ret)
+ goto out;
+
+ return 0;
+ }
+
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
+ CFG54_USB3PHY_REF_USE_PAD,
+ CFG54_USB3PHY_REF_USE_PAD);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
+ CFGA0_USB2PHY_REFCLK_SELECT,
+ CFGA0_USB2PHY_REFCLK_SELECT);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
+ if (ret)
+ goto out;
+ val &= ~CTRL7_USB2_REFCLKSEL_MASK;
+ val |= CTRL7_USB2_REFCLKSEL_PAD;
+ ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->peri_crg,
+ PERI_CRG_PEREN6, GT_CLK_USB2PHY_REF);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3670_config_tca(struct hi3670_priv *priv)
+{
+ u32 val, mask;
+ int ret;
+
+ ret = regmap_write(priv->usb31misc, TCA_INTR_STS, 0xffff);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->usb31misc, TCA_INTR_EN,
+ INTR_EN_XA_TIMEOUT_EVT_EN | INTR_EN_XA_ACK_EVT_EN);
+ if (ret)
+ goto out;
+
+ mask = CLK_RST_TCA_REF_CLK_EN | CLK_RST_SUSPEND_CLK_EN;
+ ret = regmap_update_bits(priv->usb31misc, TCA_CLK_RST, mask, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, TCA_GCFG,
+ GCFG_ROLE_HSTDEV | GCFG_OP_MODE,
+ GCFG_ROLE_HSTDEV | GCFG_OP_MODE_CTRL_SYNC_MODE);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, TCA_SYSMODE_CFG,
+ SYSMODE_CFG_TYPEC_DISABLE, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->usb31misc, TCA_TCPC, &val);
+ if (ret)
+ goto out;
+ val &= ~(TCPC_VALID | TCPC_LOW_POWER_EN | TCPC_MUX_CONTROL_MASK);
+ val |= (TCPC_VALID | TCPC_MUX_CONTROL_USB31);
+ ret = regmap_write(priv->usb31misc, TCA_TCPC, val);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->usb31misc, TCA_VBUS_CTRL,
+ VBUS_CTRL_POWERPRESENT_OVERRD | VBUS_CTRL_VBUSVALID_OVERRD);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3670_phy_init(struct phy *phy)
+{
+ struct hi3670_priv *priv = phy_get_drvdata(phy);
+ u32 val;
+ int ret;
+
+ /* assert controller */
+ val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET |
+ CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, 0);
+ if (ret)
+ goto out;
+
+ ret = hi3670_config_phy_clock(priv);
+ if (ret)
+ goto out;
+
+ /* Exit from IDDQ mode */
+ ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL5,
+ CTRL5_USB2_SIDDQ, 0);
+ if (ret)
+ goto out;
+
+ /* Release USB31 PHY out of TestPowerDown mode */
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG50,
+ CFG50_USB3_PHY_TEST_POWERDOWN, 0);
+ if (ret)
+ goto out;
+
+ /* Deassert phy */
+ val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
+ if (ret)
+ goto out;
+
+ usleep_range(100, 120);
+
+ /* Tell the PHY power is stable */
+ val = CFG54_USB3_PHY0_ANA_PWR_EN | CFG54_PHY0_PCS_PWR_STABLE |
+ CFG54_PHY0_PMA_PWR_STABLE;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
+ val, val);
+ if (ret)
+ goto out;
+
+ ret = hi3670_config_tca(priv);
+ if (ret)
+ goto out;
+
+ /* Enable SSC */
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG5C,
+ CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN,
+ CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN);
+ if (ret)
+ goto out;
+
+ /* Deassert controller */
+ val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
+ if (ret)
+ goto out;
+
+ usleep_range(100, 120);
+
+ /* Set fake vbus valid signal */
+ val = CTRL0_USB3_VBUSVLD | CTRL0_USB3_VBUSVLD_SEL;
+ ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL0, val, val);
+ if (ret)
+ goto out;
+
+ val = CTRL3_USB2_VBUSVLDEXT0 | CTRL3_USB2_VBUSVLDEXTSEL0;
+ ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL3, val, val);
+ if (ret)
+ goto out;
+
+ usleep_range(100, 120);
+
+ ret = hi3670_phy_set_params(priv);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3670_phy_exit(struct phy *phy)
+{
+ struct hi3670_priv *priv = phy_get_drvdata(phy);
+ u32 mask;
+ int ret;
+
+ /* Assert phy */
+ mask = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, mask, 0);
+ if (ret)
+ goto out;
+
+ if (!hi3670_is_abbclk_selected(priv)) {
+ /* disable usb_tcxo_en */
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
+ USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+ } else {
+ ret = regmap_write(priv->peri_crg, PERI_CRG_PERDIS6,
+ GT_CLK_USB2PHY_REF);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
+ return ret;
+}
+
+static const struct phy_ops hi3670_phy_ops = {
+ .init = hi3670_phy_init,
+ .exit = hi3670_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int hi3670_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct phy *phy;
+ struct hi3670_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pericrg-syscon");
+ if (IS_ERR(priv->peri_crg)) {
+ dev_err(dev, "no hisilicon,pericrg-syscon\n");
+ return PTR_ERR(priv->peri_crg);
+ }
+
+ priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pctrl-syscon");
+ if (IS_ERR(priv->pctrl)) {
+ dev_err(dev, "no hisilicon,pctrl-syscon\n");
+ return PTR_ERR(priv->pctrl);
+ }
+
+ priv->sctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,sctrl-syscon");
+ if (IS_ERR(priv->sctrl)) {
+ dev_err(dev, "no hisilicon,sctrl-syscon\n");
+ return PTR_ERR(priv->sctrl);
+ }
+
+ /* node of hi3670 phy is a sub-node of usb3_otg_bc */
+ priv->usb31misc = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(priv->usb31misc)) {
+ dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
+ return PTR_ERR(priv->usb31misc);
+ }
+
+ if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
+ &priv->eye_diagram_param))
+ priv->eye_diagram_param = KIRIN970_USB_DEFAULT_PHY_PARAM;
+
+ if (of_property_read_u32(dev->of_node, "hisilicon,tx-vboost-lvl",
+ &priv->tx_vboost_lvl))
+ priv->tx_vboost_lvl = KIRIN970_USB_DEFAULT_PHY_VBOOST;
+
+ phy = devm_phy_create(dev, NULL, &hi3670_phy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3670_phy_of_match[] = {
+ { .compatible = "hisilicon,hi3670-usb-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, hi3670_phy_of_match);
+
+static struct platform_driver hi3670_phy_driver = {
+ .probe = hi3670_phy_probe,
+ .driver = {
+ .name = "hi3670-usb-phy",
+ .of_match_table = hi3670_phy_of_match,
+ }
+};
+module_platform_driver(hi3670_phy_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hilisicon Kirin970 USB31 PHY Driver");
@@ -1,16 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-# to be placed at drivers/phy
-config PHY_HI3670_USB
- tristate "hi3670 USB PHY support"
- depends on (ARCH_HISI && ARM64) || COMPILE_TEST
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the HISILICON HI3670 USB PHY.
-
- To compile this driver as a module, choose M here.
-
# to be placed at drivers/spmi
config SPMI_HISI3670
tristate "Hisilicon 3670 SPMI Controller"
@@ -1,6 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PHY_HI3670_USB) += phy-hi3670-usb3.o
-
obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
deleted file mode 100644
@@ -1,661 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Phy provider for USB 3.1 controller on HiSilicon Kirin970 platform
- *
- * Copyright (C) 2017-2020 Hilisicon Electronics Co., Ltd.
- * http://www.huawei.com
- *
- * Authors: Yu Chen <chenyu56@huawei.com>
- */
-
-#include <linux/bitfield.h>
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-
-#define SCTRL_SCDEEPSLEEPED (0x0)
-#define USB_CLK_SELECTED BIT(20)
-
-#define PERI_CRG_PEREN0 (0x00)
-#define PERI_CRG_PERDIS0 (0x04)
-#define PERI_CRG_PEREN4 (0x40)
-#define PERI_CRG_PERDIS4 (0x44)
-#define PERI_CRG_PERRSTEN4 (0x90)
-#define PERI_CRG_PERRSTDIS4 (0x94)
-#define PERI_CRG_ISODIS (0x148)
-#define PERI_CRG_PEREN6 (0x410)
-#define PERI_CRG_PERDIS6 (0x414)
-
-#define USB_REFCLK_ISO_EN BIT(25)
-
-#define GT_CLK_USB2PHY_REF BIT(19)
-
-#define PCTRL_PERI_CTRL3 (0x10)
-#define PCTRL_PERI_CTRL3_MSK_START (16)
-#define USB_TCXO_EN BIT(1)
-
-#define PCTRL_PERI_CTRL24 (0x64)
-#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
-
-#define USB3OTG_CTRL0 (0x00)
-#define USB3OTG_CTRL3 (0x0c)
-#define USB3OTG_CTRL4 (0x10)
-#define USB3OTG_CTRL5 (0x14)
-#define USB3OTG_CTRL7 (0x1c)
-#define USB_MISC_CFG50 (0x50)
-#define USB_MISC_CFG54 (0x54)
-#define USB_MISC_CFG58 (0x58)
-#define USB_MISC_CFG5C (0x5c)
-#define USB_MISC_CFGA0 (0xa0)
-#define TCA_CLK_RST (0x200)
-#define TCA_INTR_EN (0x204)
-#define TCA_INTR_STS (0x208)
-#define TCA_GCFG (0x210)
-#define TCA_TCPC (0x214)
-#define TCA_SYSMODE_CFG (0x218)
-#define TCA_VBUS_CTRL (0x240)
-
-#define CTRL0_USB3_VBUSVLD BIT(7)
-#define CTRL0_USB3_VBUSVLD_SEL BIT(6)
-
-#define CTRL3_USB2_VBUSVLDEXT0 BIT(6)
-#define CTRL3_USB2_VBUSVLDEXTSEL0 BIT(5)
-
-#define CTRL5_USB2_SIDDQ BIT(0)
-
-#define CTRL7_USB2_REFCLKSEL_MASK GENMASK(4, 3)
-#define CTRL7_USB2_REFCLKSEL_ABB (BIT(4) | BIT(3))
-#define CTRL7_USB2_REFCLKSEL_PAD BIT(4)
-
-#define CFG50_USB3_PHY_TEST_POWERDOWN BIT(23)
-
-#define CFG54_USB31PHY_CR_ADDR_MASK GENMASK(31, 16)
-
-#define CFG54_USB3PHY_REF_USE_PAD BIT(12)
-#define CFG54_PHY0_PMA_PWR_STABLE BIT(11)
-#define CFG54_PHY0_PCS_PWR_STABLE BIT(9)
-#define CFG54_USB31PHY_CR_ACK BIT(7)
-#define CFG54_USB31PHY_CR_WR_EN BIT(5)
-#define CFG54_USB31PHY_CR_SEL BIT(4)
-#define CFG54_USB31PHY_CR_RD_EN BIT(3)
-#define CFG54_USB31PHY_CR_CLK BIT(2)
-#define CFG54_USB3_PHY0_ANA_PWR_EN BIT(1)
-
-#define CFG58_USB31PHY_CR_DATA_MASK GENMASK(31, 16)
-
-#define CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN BIT(1)
-
-#define CFGA0_VAUX_RESET BIT(9)
-#define CFGA0_USB31C_RESET BIT(8)
-#define CFGA0_USB2PHY_REFCLK_SELECT BIT(4)
-#define CFGA0_USB3PHY_RESET BIT(1)
-#define CFGA0_USB2PHY_POR BIT(0)
-
-#define INTR_EN_XA_TIMEOUT_EVT_EN BIT(1)
-#define INTR_EN_XA_ACK_EVT_EN BIT(0)
-
-#define CLK_RST_TCA_REF_CLK_EN BIT(1)
-#define CLK_RST_SUSPEND_CLK_EN BIT(0)
-
-#define GCFG_ROLE_HSTDEV BIT(4)
-#define GCFG_OP_MODE GENMASK(1, 0)
-#define GCFG_OP_MODE_CTRL_SYNC_MODE BIT(0)
-
-#define TCPC_VALID BIT(4)
-#define TCPC_LOW_POWER_EN BIT(3)
-#define TCPC_MUX_CONTROL_MASK GENMASK(1, 0)
-#define TCPC_MUX_CONTROL_USB31 BIT(0)
-
-#define SYSMODE_CFG_TYPEC_DISABLE BIT(3)
-
-#define VBUS_CTRL_POWERPRESENT_OVERRD GENMASK(3, 2)
-#define VBUS_CTRL_VBUSVALID_OVERRD GENMASK(1, 0)
-
-#define KIRIN970_USB_DEFAULT_PHY_PARAM (0xfdfee4)
-#define KIRIN970_USB_DEFAULT_PHY_VBOOST (0x5)
-
-#define TX_VBOOST_LVL_REG (0xf)
-#define TX_VBOOST_LVL_START (6)
-#define TX_VBOOST_LVL_ENABLE BIT(9)
-
-struct hi3670_priv {
- struct device *dev;
- struct regmap *peri_crg;
- struct regmap *pctrl;
- struct regmap *sctrl;
- struct regmap *usb31misc;
-
- u32 eye_diagram_param;
- u32 tx_vboost_lvl;
-
- u32 peri_crg_offset;
- u32 pctrl_offset;
- u32 usb31misc_offset;
-};
-
-static int hi3670_phy_cr_clk(struct regmap *usb31misc)
-{
- int ret;
-
- /* Clock up */
- ret = regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_CLK, CFG54_USB31PHY_CR_CLK);
- if (ret)
- return ret;
-
- /* Clock down */
- return regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_CLK, 0);
-}
-
-static int hi3670_phy_cr_set_sel(struct regmap *usb31misc)
-{
- return regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_SEL, CFG54_USB31PHY_CR_SEL);
-}
-
-static int hi3670_phy_cr_start(struct regmap *usb31misc, int direction)
-{
- int ret, reg;
-
- if (direction)
- reg = CFG54_USB31PHY_CR_WR_EN;
- else
- reg = CFG54_USB31PHY_CR_RD_EN;
-
- ret = regmap_update_bits(usb31misc, USB_MISC_CFG54, reg, reg);
-
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_clk(usb31misc);
- if (ret)
- return ret;
-
- return regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_RD_EN | CFG54_USB31PHY_CR_WR_EN, 0);
-}
-
-static int hi3670_phy_cr_wait_ack(struct regmap *usb31misc)
-{
- u32 reg;
- int retry = 10;
- int ret;
-
- while (retry-- > 0) {
- ret = regmap_read(usb31misc, USB_MISC_CFG54, ®);
- if (ret)
- return ret;
- if ((reg & CFG54_USB31PHY_CR_ACK) == CFG54_USB31PHY_CR_ACK)
- return 0;
-
- ret = hi3670_phy_cr_clk(usb31misc);
- if (ret)
- return ret;
-
- usleep_range(10, 20);
- }
-
- return -ETIMEDOUT;
-}
-
-static int hi3670_phy_cr_set_addr(struct regmap *usb31misc, u32 addr)
-{
- u32 reg;
- int ret;
-
- ret = regmap_read(usb31misc, USB_MISC_CFG54, ®);
- if (ret)
- return ret;
-
- reg = FIELD_PREP(CFG54_USB31PHY_CR_ADDR_MASK, addr);
-
- return regmap_update_bits(usb31misc, USB_MISC_CFG54,
- CFG54_USB31PHY_CR_ADDR_MASK, reg);
-}
-
-static int hi3670_phy_cr_read(struct regmap *usb31misc, u32 addr, u32 *val)
-{
- int reg, i, ret;
-
- for (i = 0; i < 100; i++) {
- ret = hi3670_phy_cr_clk(usb31misc);
- if (ret)
- return ret;
- }
-
- ret = hi3670_phy_cr_set_sel(usb31misc);
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_set_addr(usb31misc, addr);
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_start(usb31misc, 0);
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_wait_ack(usb31misc);
- if (ret)
- return ret;
-
- ret = regmap_read(usb31misc, USB_MISC_CFG58, ®);
- if (ret)
- return ret;
-
- *val = FIELD_GET(CFG58_USB31PHY_CR_DATA_MASK, reg);
-
- return 0;
-}
-
-static int hi3670_phy_cr_write(struct regmap *usb31misc, u32 addr, u32 val)
-{
- int i;
- int ret;
-
- for (i = 0; i < 100; i++) {
- ret = hi3670_phy_cr_clk(usb31misc);
- if (ret)
- return ret;
- }
-
- ret = hi3670_phy_cr_set_sel(usb31misc);
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_set_addr(usb31misc, addr);
- if (ret)
- return ret;
-
- ret = regmap_write(usb31misc, USB_MISC_CFG58,
- FIELD_PREP(CFG58_USB31PHY_CR_DATA_MASK, val));
- if (ret)
- return ret;
-
- ret = hi3670_phy_cr_start(usb31misc, 1);
- if (ret)
- return ret;
-
- return hi3670_phy_cr_wait_ack(usb31misc);
-}
-
-static int hi3670_phy_set_params(struct hi3670_priv *priv)
-{
- u32 reg;
- int ret;
- int retry = 3;
-
- ret = regmap_write(priv->usb31misc, USB3OTG_CTRL4,
- priv->eye_diagram_param);
- if (ret) {
- dev_err(priv->dev, "set USB3OTG_CTRL4 failed\n");
- return ret;
- }
-
- while (retry-- > 0) {
- ret = hi3670_phy_cr_read(priv->usb31misc,
- TX_VBOOST_LVL_REG, ®);
- if (!ret)
- break;
-
- if (ret != -ETIMEDOUT) {
- dev_err(priv->dev, "read TX_VBOOST_LVL_REG failed\n");
- return ret;
- }
- }
- if (ret)
- return ret;
-
- reg |= (TX_VBOOST_LVL_ENABLE | (priv->tx_vboost_lvl << TX_VBOOST_LVL_START));
- ret = hi3670_phy_cr_write(priv->usb31misc, TX_VBOOST_LVL_REG, reg);
- if (ret)
- dev_err(priv->dev, "write TX_VBOOST_LVL_REG failed\n");
-
- return ret;
-}
-
-static bool hi3670_is_abbclk_selected(struct hi3670_priv *priv)
-{
- u32 reg;
-
- if (!priv->sctrl) {
- dev_err(priv->dev, "priv->sctrl is null!\n");
- return false;
- }
-
- if (regmap_read(priv->sctrl, SCTRL_SCDEEPSLEEPED, ®)) {
- dev_err(priv->dev, "SCTRL_SCDEEPSLEEPED read failed!\n");
- return false;
- }
-
- if ((reg & USB_CLK_SELECTED) == 0)
- return false;
-
- return true;
-}
-
-static int hi3670_config_phy_clock(struct hi3670_priv *priv)
-{
- u32 val, mask;
- int ret;
-
- if (!hi3670_is_abbclk_selected(priv)) {
- /* usb refclk iso disable */
- ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS,
- USB_REFCLK_ISO_EN);
- if (ret)
- goto out;
-
- /* enable usb_tcxo_en */
- ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
- USB_TCXO_EN |
- (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START));
-
- /* select usbphy clk from abb */
- mask = SC_CLK_USB3PHY_3MUX1_SEL;
- ret = regmap_update_bits(priv->pctrl,
- PCTRL_PERI_CTRL24, mask, 0);
- if (ret)
- goto out;
-
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
- CFGA0_USB2PHY_REFCLK_SELECT, 0);
- if (ret)
- goto out;
-
- ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
- if (ret)
- goto out;
- val &= ~CTRL7_USB2_REFCLKSEL_MASK;
- val |= CTRL7_USB2_REFCLKSEL_ABB;
- ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
- if (ret)
- goto out;
-
- return 0;
- }
-
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
- CFG54_USB3PHY_REF_USE_PAD,
- CFG54_USB3PHY_REF_USE_PAD);
- if (ret)
- goto out;
-
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
- CFGA0_USB2PHY_REFCLK_SELECT,
- CFGA0_USB2PHY_REFCLK_SELECT);
- if (ret)
- goto out;
-
- ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
- if (ret)
- goto out;
- val &= ~CTRL7_USB2_REFCLKSEL_MASK;
- val |= CTRL7_USB2_REFCLKSEL_PAD;
- ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
- if (ret)
- goto out;
-
- ret = regmap_write(priv->peri_crg,
- PERI_CRG_PEREN6, GT_CLK_USB2PHY_REF);
- if (ret)
- goto out;
-
- return 0;
-out:
- dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
- return ret;
-}
-
-static int hi3670_config_tca(struct hi3670_priv *priv)
-{
- u32 val, mask;
- int ret;
-
- ret = regmap_write(priv->usb31misc, TCA_INTR_STS, 0xffff);
- if (ret)
- goto out;
-
- ret = regmap_write(priv->usb31misc, TCA_INTR_EN,
- INTR_EN_XA_TIMEOUT_EVT_EN | INTR_EN_XA_ACK_EVT_EN);
- if (ret)
- goto out;
-
- mask = CLK_RST_TCA_REF_CLK_EN | CLK_RST_SUSPEND_CLK_EN;
- ret = regmap_update_bits(priv->usb31misc, TCA_CLK_RST, mask, 0);
- if (ret)
- goto out;
-
- ret = regmap_update_bits(priv->usb31misc, TCA_GCFG,
- GCFG_ROLE_HSTDEV | GCFG_OP_MODE,
- GCFG_ROLE_HSTDEV | GCFG_OP_MODE_CTRL_SYNC_MODE);
- if (ret)
- goto out;
-
- ret = regmap_update_bits(priv->usb31misc, TCA_SYSMODE_CFG,
- SYSMODE_CFG_TYPEC_DISABLE, 0);
- if (ret)
- goto out;
-
- ret = regmap_read(priv->usb31misc, TCA_TCPC, &val);
- if (ret)
- goto out;
- val &= ~(TCPC_VALID | TCPC_LOW_POWER_EN | TCPC_MUX_CONTROL_MASK);
- val |= (TCPC_VALID | TCPC_MUX_CONTROL_USB31);
- ret = regmap_write(priv->usb31misc, TCA_TCPC, val);
- if (ret)
- goto out;
-
- ret = regmap_write(priv->usb31misc, TCA_VBUS_CTRL,
- VBUS_CTRL_POWERPRESENT_OVERRD | VBUS_CTRL_VBUSVALID_OVERRD);
- if (ret)
- goto out;
-
- return 0;
-out:
- dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
- return ret;
-}
-
-static int hi3670_phy_init(struct phy *phy)
-{
- struct hi3670_priv *priv = phy_get_drvdata(phy);
- u32 val;
- int ret;
-
- /* assert controller */
- val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET |
- CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, 0);
- if (ret)
- goto out;
-
- ret = hi3670_config_phy_clock(priv);
- if (ret)
- goto out;
-
- /* Exit from IDDQ mode */
- ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL5,
- CTRL5_USB2_SIDDQ, 0);
- if (ret)
- goto out;
-
- /* Release USB31 PHY out of TestPowerDown mode */
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG50,
- CFG50_USB3_PHY_TEST_POWERDOWN, 0);
- if (ret)
- goto out;
-
- /* Deassert phy */
- val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
- if (ret)
- goto out;
-
- usleep_range(100, 120);
-
- /* Tell the PHY power is stable */
- val = CFG54_USB3_PHY0_ANA_PWR_EN | CFG54_PHY0_PCS_PWR_STABLE |
- CFG54_PHY0_PMA_PWR_STABLE;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
- val, val);
- if (ret)
- goto out;
-
- ret = hi3670_config_tca(priv);
- if (ret)
- goto out;
-
- /* Enable SSC */
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG5C,
- CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN,
- CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN);
- if (ret)
- goto out;
-
- /* Deassert controller */
- val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
- if (ret)
- goto out;
-
- usleep_range(100, 120);
-
- /* Set fake vbus valid signal */
- val = CTRL0_USB3_VBUSVLD | CTRL0_USB3_VBUSVLD_SEL;
- ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL0, val, val);
- if (ret)
- goto out;
-
- val = CTRL3_USB2_VBUSVLDEXT0 | CTRL3_USB2_VBUSVLDEXTSEL0;
- ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL3, val, val);
- if (ret)
- goto out;
-
- usleep_range(100, 120);
-
- ret = hi3670_phy_set_params(priv);
- if (ret)
- goto out;
-
- return 0;
-out:
- dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
- return ret;
-}
-
-static int hi3670_phy_exit(struct phy *phy)
-{
- struct hi3670_priv *priv = phy_get_drvdata(phy);
- u32 mask;
- int ret;
-
- /* Assert phy */
- mask = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
- ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, mask, 0);
- if (ret)
- goto out;
-
- if (!hi3670_is_abbclk_selected(priv)) {
- /* disable usb_tcxo_en */
- ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
- USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
- } else {
- ret = regmap_write(priv->peri_crg, PERI_CRG_PERDIS6,
- GT_CLK_USB2PHY_REF);
- if (ret)
- goto out;
- }
-
- return 0;
-out:
- dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
- return ret;
-}
-
-static const struct phy_ops hi3670_phy_ops = {
- .init = hi3670_phy_init,
- .exit = hi3670_phy_exit,
- .owner = THIS_MODULE,
-};
-
-static int hi3670_phy_probe(struct platform_device *pdev)
-{
- struct phy_provider *phy_provider;
- struct device *dev = &pdev->dev;
- struct phy *phy;
- struct hi3670_priv *priv;
-
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- priv->dev = dev;
- priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
- "hisilicon,pericrg-syscon");
- if (IS_ERR(priv->peri_crg)) {
- dev_err(dev, "no hisilicon,pericrg-syscon\n");
- return PTR_ERR(priv->peri_crg);
- }
-
- priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
- "hisilicon,pctrl-syscon");
- if (IS_ERR(priv->pctrl)) {
- dev_err(dev, "no hisilicon,pctrl-syscon\n");
- return PTR_ERR(priv->pctrl);
- }
-
- priv->sctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
- "hisilicon,sctrl-syscon");
- if (IS_ERR(priv->sctrl)) {
- dev_err(dev, "no hisilicon,sctrl-syscon\n");
- return PTR_ERR(priv->sctrl);
- }
-
- /* node of hi3670 phy is a sub-node of usb3_otg_bc */
- priv->usb31misc = syscon_node_to_regmap(dev->parent->of_node);
- if (IS_ERR(priv->usb31misc)) {
- dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
- return PTR_ERR(priv->usb31misc);
- }
-
- if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
- &priv->eye_diagram_param))
- priv->eye_diagram_param = KIRIN970_USB_DEFAULT_PHY_PARAM;
-
- if (of_property_read_u32(dev->of_node, "hisilicon,tx-vboost-lvl",
- &priv->tx_vboost_lvl))
- priv->tx_vboost_lvl = KIRIN970_USB_DEFAULT_PHY_VBOOST;
-
- phy = devm_phy_create(dev, NULL, &hi3670_phy_ops);
- if (IS_ERR(phy))
- return PTR_ERR(phy);
-
- phy_set_drvdata(phy, priv);
- phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- return PTR_ERR_OR_ZERO(phy_provider);
-}
-
-static const struct of_device_id hi3670_phy_of_match[] = {
- { .compatible = "hisilicon,hi3670-usb-phy" },
- { },
-};
-MODULE_DEVICE_TABLE(of, hi3670_phy_of_match);
-
-static struct platform_driver hi3670_phy_driver = {
- .probe = hi3670_phy_probe,
- .driver = {
- .name = "hi3670-usb-phy",
- .of_match_table = hi3670_phy_of_match,
- }
-};
-module_platform_driver(hi3670_phy_driver);
-
-MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Hilisicon Kirin970 USB31 PHY Driver");
deleted file mode 100644
@@ -1,73 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Hisilicon Kirin970 USB PHY
-
-maintainers:
- - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |+
- Bindings for USB3 PHY on HiSilicon Kirin 970.
-
-properties:
- compatible:
- const: hisilicon,hi3670-usb-phy
-
- "#phy-cells":
- const: 0
-
- hisilicon,pericrg-syscon:
- $ref: '/schemas/types.yaml#/definitions/phandle'
- description: phandle of syscon used to control iso refclk.
-
- hisilicon,pctrl-syscon:
- $ref: '/schemas/types.yaml#/definitions/phandle'
- description: phandle of syscon used to control usb tcxo.
-
- hisilicon,sctrl-syscon:
- $ref: '/schemas/types.yaml#/definitions/phandle'
- description: phandle of syscon used to control phy deep sleep.
-
- hisilicon,eye-diagram-param:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: Eye diagram for phy.
-
- hisilicon,tx-vboost-lvl:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: TX level vboost for phy.
-
-required:
- - compatible
- - hisilicon,pericrg-syscon
- - hisilicon,pctrl-syscon
- - hisilicon,sctrl-syscon
- - hisilicon,eye-diagram-param
- - hisilicon,tx-vboost-lvl
- - "#phy-cells"
-
-additionalProperties: false
-
-examples:
- - |
- bus {
- #address-cells = <2>;
- #size-cells = <2>;
-
- usb3_otg_bc: usb3_otg_bc@ff200000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x0 0xff200000 0x0 0x1000>;
-
- usb_phy {
- compatible = "hisilicon,hi3670-usb-phy";
- #phy-cells = <0>;
- hisilicon,pericrg-syscon = <&crg_ctrl>;
- hisilicon,pctrl-syscon = <&pctrl>;
- hisilicon,sctrl-syscon = <&sctrl>;
- hisilicon,eye-diagram-param = <0xfdfee4>;
- hisilicon,tx-vboost-lvl = <0x5>;
- };
- };
- };