mbox series

[v2,0/7] ARM: qcom: msm8974-hammerhead: add USB OTG support

Message ID 20181101001149.13453-1-masneyb@onstation.org (mailing list archive)
Headers show
Series ARM: qcom: msm8974-hammerhead: add USB OTG support | expand

Message

Brian Masney Nov. 1, 2018, 12:11 a.m. UTC
This patch set adds USB OTG support for the LG Nexus 5 (hammerhead)
phone.

Changes in v2:
- Reworked patches to use gpio hogging as suggested in the bq24190
  device tree documentation.
- bq24190_charger: changed to use a switch instead of an if as requested
  by Sebastian Reichel.
- bq24190_charger dt-bindings: added usb-otg-vbus to example.


Brian Masney (5):
  dt-bindings: power: supply: bq24190_charger: add bq24192 and
    usb-otg-vbus
  power: supply: bq24190_charger: add extcon support for USB OTG
  pinctrl: qcom: spmi-gpio: fix gpio-hog related boot issues
  ARM: dts: qcom: msm8974: add gpio-ranges
  ARM: dts: qcom: msm8974-hammerhead: add USB OTG support

Jonathan Marek (2):
  power: supply: bq24190_charger: add support for bq24192 variant
  power: supply: bq24190_charger: add of_match for usb-otg-vbus
    regulator

 .../bindings/power/supply/bq24190.txt         |  9 +++
 .../qcom-msm8974-lge-nexus5-hammerhead.dts    | 60 +++++++++++++++++++
 arch/arm/boot/dts/qcom-msm8974.dtsi           | 11 ++++
 arch/arm/boot/dts/qcom-pm8941.dtsi            |  1 +
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c      | 21 +++++--
 drivers/power/supply/bq24190_charger.c        | 48 ++++++++++++++-
 6 files changed, 143 insertions(+), 7 deletions(-)