| Message ID | 20190621084217.8167-1-patrick.bellasi@arm.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add utilization clamping support | expand |
On 21-Jun 09:42, Patrick Bellasi wrote: > Hi all, this is a respin of: > > https://lore.kernel.org/lkml/20190515094459.10317-1-patrick.bellasi@arm.com/ > > which addresses all Tejun's concerns: > > - rename cgroup attributes to be cpu.uclamp.{min,max} > - update initialization of subgroups clamps to be "no clamps" by default > - use percentage rational numbers for clamp attributes, e.g. "12.34" for 12.34%. > > by introducing modifications impacting only patches: > > [PATCH v10 12/16] sched/core: uclamp: Extend CPU's cgroup controller > [PATCH v10 13/16] sched/core: uclamp: Propagate parent clamps > > The rest of the patches are the same as per in v9, they have been just rebased > on top of: > > tj/cgroup.git for-5.3 > tip/tip.git sched/core > > AFAIU, all the first 11 patches have been code reviewed and should be at a > "ready to merge" quality level. Please let me know if I'm wrong and there > is something else I need/can to do on those patches. > > Otherwise, now that we should have settled all the behavioral aspects, I'm Regarding the behavioral aspects, here I have a report with some simple tests for the current implementation: https://gist.github.com/derkling/519459b5a2be35d8681fbaf1d6efe225 There are a couple of sections at the end to test the "Delegation Model" with both CGroups v1 and v2. I'm sharing the link just in case it can be helpful to verify if what has been implemented is actually matching what Tejun expects as a sane cgroups interface. Cheers, Patrick
Hi all, this is a respin of: https://lore.kernel.org/lkml/20190515094459.10317-1-patrick.bellasi@arm.com/ which addresses all Tejun's concerns: - rename cgroup attributes to be cpu.uclamp.{min,max} - update initialization of subgroups clamps to be "no clamps" by default - use percentage rational numbers for clamp attributes, e.g. "12.34" for 12.34%. by introducing modifications impacting only patches: [PATCH v10 12/16] sched/core: uclamp: Extend CPU's cgroup controller [PATCH v10 13/16] sched/core: uclamp: Propagate parent clamps The rest of the patches are the same as per in v9, they have been just rebased on top of: tj/cgroup.git for-5.3 tip/tip.git sched/core AFAIU, all the first 11 patches have been code reviewed and should be at a "ready to merge" quality level. Please let me know if I'm wrong and there is something else I need/can to do on those patches. Otherwise, now that we should have settled all the behavioral aspects, I'm looking forward for a code review on the last set of patches of this series. Cheers, Patrick Series Organization =================== The series is organized into these main sections: - Patches [01-07]: Per task (primary) API - Patches [08-09]: Schedutil integration for FAIR and RT tasks - Patches [10-11]: Integration with EAS's energy_compute() - Patches [12-16]: Per task group (secondary) API It is based on today's tj/cgroup/for-5.3 and tip/sched/core and the full tree is available here: git://linux-arm.org/linux-pb.git lkml/utilclamp_v10 http://www.linux-arm.org/git?p=linux-pb.git;a=shortlog;h=refs/heads/lkml/utilclamp_v10 Newcomer's Short Abstract ========================= The Linux scheduler tracks a "utilization" signal for each scheduling entity (SE), e.g. tasks, to know how much CPU time they use. This signal allows the scheduler to know how "big" a task is and, in principle, it can support advanced task placement strategies by selecting the best CPU to run a task. Some of these strategies are represented by the Energy Aware Scheduler [3]. When the schedutil cpufreq governor is in use, the utilization signal allows the Linux scheduler to also drive frequency selection. The CPU utilization signal, which represents the aggregated utilization of tasks scheduled on that CPU, is used to select the frequency which best fits the workload generated by the tasks. The current translation of utilization values into a frequency selection is simple: we go to max for RT tasks or to the minimum frequency which can accommodate the utilization of DL+FAIR tasks. However, utilization values by themselves cannot convey the desired power/performance behaviors of each task as intended by user-space. As such they are not ideally suited for task placement decisions. Task placement and frequency selection policies in the kernel can be improved by taking into consideration hints coming from authorized user-space elements, like for example the Android middleware or more generally any "System Management Software" (SMS) framework. Utilization clamping is a mechanism which allows to "clamp" (i.e. filter) the utilization generated by RT and FAIR tasks within a range defined by user-space. The clamped utilization value can then be used, for example, to enforce a minimum and/or maximum frequency depending on which tasks are active on a CPU. The main use-cases for utilization clamping are: - boosting: better interactive response for small tasks which are affecting the user experience. Consider for example the case of a small control thread for an external accelerator (e.g. GPU, DSP, other devices). Here, from the task utilization the scheduler does not have a complete view of what the task's requirements are and, if it's a small utilization task, it keeps selecting a more energy efficient CPU, with smaller capacity and lower frequency, thus negatively impacting the overall time required to complete task activations. - capping: increase energy efficiency for background tasks not affecting the user experience. Since running on a lower capacity CPU at a lower frequency is more energy efficient, when the completion time is not a main goal, then capping the utilization considered for certain (maybe big) tasks can have positive effects, both on energy consumption and thermal headroom. This feature allows also to make RT tasks more energy friendly on mobile systems where running them on high capacity CPUs and at the maximum frequency is not required. From these two use-cases, it's worth noticing that frequency selection biasing, introduced by patches 9 and 10 of this series, is just one possible usage of utilization clamping. Another compelling extension of utilization clamping is in helping the scheduler in making tasks placement decisions. Utilization is (also) a task specific property the scheduler uses to know how much CPU bandwidth a task requires, at least as long as there is idle time. Thus, the utilization clamp values, defined either per-task or per-task_group, can represent tasks to the scheduler as being bigger (or smaller) than what they actually are. Utilization clamping thus enables interesting additional optimizations, for example on asymmetric capacity systems like Arm big.LITTLE and DynamIQ CPUs, where: - boosting: try to run small/foreground tasks on higher-capacity CPUs to complete them faster despite being less energy efficient. - capping: try to run big/background tasks on low-capacity CPUs to save power and thermal headroom for more important tasks This series does not present this additional usage of utilization clamping but it's an integral part of the EAS feature set, where [4] is one of its main components. Android kernels use SchedTune, a solution similar to utilization clamping, to bias both 'frequency selection' and 'task placement'. This series provides the foundation to add similar features to mainline while focusing, for the time being, just on schedutil integration. References ========== [1] Message-ID: <20190509130215.GV2623@hirez.programming.kicks-ass.net> https://lore.kernel.org/lkml/20190509130215.GV2623@hirez.programming.kicks-ass.net/ [2] Message-ID: <20180911162827.GJ1100574@devbig004.ftw2.facebook.com> https://lore.kernel.org/lkml/20180911162827.GJ1100574@devbig004.ftw2.facebook.com/ [3] Energy Aware Scheduling https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/scheduler/sched-energy.txt?h=v5.1 [4] Expressing per-task/per-cgroup performance hints Linux Plumbers Conference 2018 https://linuxplumbersconf.org/event/2/contributions/128/ Patrick Bellasi (16): sched/core: uclamp: Add CPU's clamp buckets refcounting sched/core: uclamp: Add bucket local max tracking sched/core: uclamp: Enforce last task's UCLAMP_MAX sched/core: uclamp: Add system default clamps sched/core: Allow sched_setattr() to use the current policy sched/core: uclamp: Extend sched_setattr() to support utilization clamping sched/core: uclamp: Reset uclamp values on RESET_ON_FORK sched/core: uclamp: Set default clamps for RT tasks sched/cpufreq: uclamp: Add clamps for FAIR and RT tasks sched/core: uclamp: Add uclamp_util_with() sched/fair: uclamp: Add uclamp support to energy_compute() sched/core: uclamp: Extend CPU's cgroup controller sched/core: uclamp: Propagate parent clamps sched/core: uclamp: Propagate system defaults to root group sched/core: uclamp: Use TG's clamps to restrict TASK's clamps sched/core: uclamp: Update CPU's refcount on TG's clamp changes Documentation/admin-guide/cgroup-v2.rst | 50 ++ include/linux/log2.h | 34 + include/linux/sched.h | 58 ++ include/linux/sched/sysctl.h | 11 + include/linux/sched/topology.h | 6 - include/uapi/linux/sched.h | 14 +- include/uapi/linux/sched/types.h | 66 +- init/Kconfig | 75 +++ kernel/sched/core.c | 797 +++++++++++++++++++++++- kernel/sched/cpufreq_schedutil.c | 22 +- kernel/sched/fair.c | 44 +- kernel/sched/rt.c | 4 + kernel/sched/sched.h | 123 +++- kernel/sysctl.c | 16 + 14 files changed, 1276 insertions(+), 44 deletions(-)