mbox series

[0/4] Add support for i.MX8MM thermal sensor driver

Message ID 20190704091313.9516-1-Anson.Huang@nxp.com (mailing list archive)
Headers show
Series Add support for i.MX8MM thermal sensor driver | expand

Message

Anson Huang July 4, 2019, 9:13 a.m. UTC
From: Anson Huang <Anson.Huang@nxp.com>

i.MX8MM has a thermal monitor unit (TMU) inside, it ONLY has one sensor
for CPU, add support for temperature reading for CPU, cpu cooling is
also added.

This patch series is based on below i.MX SCU thermal patch series:
https://patchwork.kernel.org/patch/11000821/

Anson Huang (4):
  dt-bindings: thermal: imx8mm-thermal: Add binding doc for i.MX8MM
  thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit
  arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module
  arm64: dts: imx8mm: Add thermal zone support

 .../devicetree/bindings/thermal/imx8mm-thermal.txt |  15 +++
 arch/arm64/boot/dts/freescale/imx8mm.dtsi          |  43 +++++++
 arch/arm64/configs/defconfig                       |   1 +
 drivers/thermal/Kconfig                            |  10 ++
 drivers/thermal/Makefile                           |   1 +
 drivers/thermal/imx8mm_thermal.c                   | 134 +++++++++++++++++++++
 6 files changed, 204 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
 create mode 100644 drivers/thermal/imx8mm_thermal.c