mbox series

[0/4] thermal: stm32: driver improvements

Message ID 20191029164537.1561-1-p.paillet@st.com (mailing list archive)
Headers show
Series thermal: stm32: driver improvements | expand

Message

Pascal Paillet Oct. 29, 2019, 4:45 p.m. UTC 
The goal of this patchset is to improve stm32 thermal driver:
* add support for multiple trip points. Currently the driver supports only
2 trip points.
* rework interrupt management to avoid receiving hundreds of
interrupts when the temperature is close to a low threshold.
* fix a mistake regarding the role of an engineering value.
* suppress passive trip point on stm32mp157c because it is useless.

Pascal Paillet (4):
  thermal: stm32: implement set_trips callback
  thermal: stm32: fix IRQ flood on low threshold
  thermal: stm32: fix engineering calibration value
  ARM: dts: stm32: remove thermal passive trip point on stm32mp157c

 arch/arm/boot/dts/stm32mp157c.dtsi |   6 -
 drivers/thermal/st/stm_thermal.c   | 441 +++++++++--------------------
 2 files changed, 138 insertions(+), 309 deletions(-)