mbox series

[0/6] power: supply: introduce the Qualcomm smb2

Message ID 20220401202643.877609-1-caleb.connolly@linaro.org (mailing list archive)
Headers show
Series power: supply: introduce the Qualcomm smb2 | expand

Message

Caleb Connolly April 1, 2022, 8:26 p.m. UTC 
Add a driver for the Qualcomm PMI8998/SDM660 Switch-Mode Battery Charger
"2". This replaces the previous SMBB hardware found in older PMICs.

This driver provides basic support for initialising the hardware,
configuring the USB input current limit and reporting information about
the state of the charger. Features like type-c dual role support and OTG
switching will be added in future patches.

This patch series depends on my previous series adding support for
the Round Robin ADC which is used for reading the USB voltage and
current, it can be found here:
https://lore.kernel.org/linux-arm-msm/20220323162820.110806-1-caleb@connolly.tech/

---
Caleb Connolly (6):
  power: supply: add Qualcomm SMB2 driver
  arm64: dts: qcom: pmi8998: add smb2 node
  arm64: dts: sdm845-oneplus: enable smb2
  arm64: dts: qcom: sdm845-db845c: enable smb2
  arm64: dts: qcom: sdm845-xiaomi-beryllium enable smb2
  dt-bindings: power: supply: qcom,smb2: add bindings for smb2 driver

 .../bindings/power/supply/qcom,smb2.yaml      |  68 ++
 arch/arm64/boot/dts/qcom/pmi8998.dtsi         |  15 +
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts    |  18 +
 .../boot/dts/qcom/sdm845-oneplus-common.dtsi  |   4 +
 .../dts/qcom/sdm845-oneplus-enchilada.dts     |   4 +
 .../boot/dts/qcom/sdm845-oneplus-fajita.dts   |   4 +
 .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts |  14 +
 drivers/power/supply/Kconfig                  |   9 +
 drivers/power/supply/Makefile                 |   1 +
 drivers/power/supply/qcom_smb2.c              | 930 ++++++++++++++++++
 10 files changed, 1067 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/qcom,smb2.yaml
 create mode 100644 drivers/power/supply/qcom_smb2.c