mbox series

[v4,0/4] Add support for QoS configuration

Message ID 20240325181628.9407-1-quic_okukatla@quicinc.com (mailing list archive)
Headers show
Series Add support for QoS configuration | expand

Message

Odelu Kukatla March 25, 2024, 6:16 p.m. UTC 
This series adds QoS support for QNOC type device which can be found on
SC7280 platform. It adds support for programming priority,
priority forward disable and urgency forwarding. This helps in
priortizing the traffic originating from different interconnect masters
at NOC(Network On Chip).

Changes in v4:
 - Addressed comments related to spacing and line wrapping.
 - Changed the print level from warn to info for regmap related errors.
 - Use of GENMASK instead of BIT_MASK for bit mask creation.

Odelu Kukatla (4):
  interconnect: qcom: icc-rpmh: Add QoS configuration support
  interconnect: qcom: sc7280: enable QoS programming
  dt-bindings: interconnect: add clock property to enable QOS on SC7280
  arm64: dts: qcom: sc7280: Add clocks for QOS configuration

 .../interconnect/qcom,sc7280-rpmh.yaml        |  14 +
 arch/arm64/boot/dts/qcom/sc7280.dtsi          |   3 +
 drivers/interconnect/qcom/icc-rpmh.c          |  99 ++++++
 drivers/interconnect/qcom/icc-rpmh.h          |  34 ++
 drivers/interconnect/qcom/sc7280.c            | 332 ++++++++++++++++++
 5 files changed, 482 insertions(+)