diff mbox series

[v5,4/9] clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config

Message ID 00e6be6cb9cee56628123a64ade118d0a752018b.1697781921.git.quic_varada@quicinc.com (mailing list archive)
State New, archived
Delegated to: viresh kumar
Headers show
Series Enable cpufreq for IPQ5332 & IPQ9574 | expand

Commit Message

Varadarajan Narayanan Oct. 20, 2023, 6:19 a.m. UTC 
The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support
this frequency. Hence set it to 0x2d to get 1.1GHz which is
supported in all SKUs.

The frequency can still increase above this initial configuration
made here when the cpufreq driver picks a different OPP.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v4:	Update commit log to indicate that cpufreq could subsequently
	change the frequency based on the selected OPP
---
 drivers/clk/qcom/apss-ipq-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index 18c4ffe..41279e5 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -74,7 +74,7 @@  static struct clk_alpha_pll ipq_pll_stromer_plus = {
 };
 
 static const struct alpha_pll_config ipq5332_pll_config = {
-	.l = 0x3e,
+	.l = 0x2d,
 	.config_ctl_val = 0x4001075b,
 	.config_ctl_hi_val = 0x304,
 	.main_output_mask = BIT(0),