| Message ID | 1344516365-7230-3-git-send-email-durgadoss.r@intel.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On ?, 2012-08-09 at 18:15 +0530, Durgadoss R wrote: > This patch moves the thermal_instance structure > to thermal.h so that thermal management files > (other than thermal_sys.c) can also access it. > > Signed-off-by: Durgadoss R <durgadoss.r@intel.com> > --- > drivers/thermal/thermal_sys.c | 21 --------------------- > include/linux/thermal.h | 23 +++++++++++++++++++++++ > 2 files changed, 23 insertions(+), 21 deletions(-) > > diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c > index 5be8728..a0e20f9 100644 > --- a/drivers/thermal/thermal_sys.c > +++ b/drivers/thermal/thermal_sys.c > @@ -41,27 +41,6 @@ MODULE_AUTHOR("Zhang Rui"); > MODULE_DESCRIPTION("Generic thermal management sysfs support"); > MODULE_LICENSE("GPL"); > > -#define THERMAL_NO_TARGET -1UL > -/* > - * This structure is used to describe the behavior of > - * a certain cooling device on a certain trip point > - * in a certain thermal zone > - */ > -struct thermal_instance { > - int id; > - char name[THERMAL_NAME_LENGTH]; > - struct thermal_zone_device *tz; > - struct thermal_cooling_device *cdev; > - int trip; > - unsigned long upper; /* Highest cooling state for this trip point */ > - unsigned long lower; /* Lowest cooling state for this trip point */ > - unsigned long target; /* expected cooling state */ > - char attr_name[THERMAL_NAME_LENGTH]; > - struct device_attribute attr; > - struct list_head tz_node; /* node in tz->thermal_instances */ > - struct list_head cdev_node; /* node in cdev->thermal_instances */ > -}; > - > static DEFINE_IDR(thermal_tz_idr); > static DEFINE_IDR(thermal_cdev_idr); > static DEFINE_MUTEX(thermal_idr_lock); > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > index 8611e3e..f25df23 100644 > --- a/include/linux/thermal.h > +++ b/include/linux/thermal.h > @@ -33,6 +33,9 @@ > #define THERMAL_MAX_TRIPS 12 > #define THERMAL_NAME_LENGTH 20 > > +/* Initial state of a cooling device during binding */ > +#define THERMAL_NO_TARGET -1UL > + > /* No upper/lower limit requirement */ > #define THERMAL_NO_LIMIT -1UL > > @@ -164,6 +167,26 @@ struct thermal_zone_device { > struct delayed_work poll_queue; > }; > > +/* > + * This structure is used to describe the behavior of > + * a certain cooling device on a certain trip point > + * in a certain thermal zone > + */ > +struct thermal_instance { > + int id; > + char name[THERMAL_NAME_LENGTH]; > + struct thermal_zone_device *tz; > + struct thermal_cooling_device *cdev; > + int trip; > + unsigned long upper; /* Highest cooling state for this trip point */ > + unsigned long lower; /* Lowest cooling state for this trip point */ > + unsigned long target; /* expected cooling state */ > + char attr_name[THERMAL_NAME_LENGTH]; > + struct device_attribute attr; > + struct list_head tz_node; /* node in tz->thermal_instances */ > + struct list_head cdev_node; /* node in cdev->thermal_instances */ > +}; > + as this structure is used internally only, I'm thinking if we can rename drivers/thermal/thermal_sys.c to drivers/thermal/thermal_core.c, and introduce drivers/thermal/thermal_core.h for these internal stuff. what do you think? thanks, rui > struct thermal_genl_event { > u32 orig; > enum events event; -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rui, > -----Original Message----- > From: Zhang, Rui > Sent: Thursday, August 16, 2012 11:44 AM > To: R, Durgadoss > Cc: lenb@kernel.org; rjw@sisk.pl; linux-acpi@vger.kernel.org; linux- > pm@vger.kernel.org; eduardo.valentin@ti.com; amit.kachhap@linaro.org; > wni@nvidia.com > Subject: Re: [PATCH 02/13] Thermal: Move thermal_instance to thermal.h > > On ?, 2012-08-09 at 18:15 +0530, Durgadoss R wrote: > > This patch moves the thermal_instance structure > > to thermal.h so that thermal management files > > (other than thermal_sys.c) can also access it. > > > > Signed-off-by: Durgadoss R <durgadoss.r@intel.com> > > --- > > drivers/thermal/thermal_sys.c | 21 --------------------- > > include/linux/thermal.h | 23 +++++++++++++++++++++++ > > 2 files changed, 23 insertions(+), 21 deletions(-) > > > > diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c > > index 5be8728..a0e20f9 100644 > > --- a/drivers/thermal/thermal_sys.c > > +++ b/drivers/thermal/thermal_sys.c > > @@ -41,27 +41,6 @@ MODULE_AUTHOR("Zhang Rui"); > > MODULE_DESCRIPTION("Generic thermal management sysfs support"); > > MODULE_LICENSE("GPL"); > > > > -#define THERMAL_NO_TARGET -1UL > > -/* > > - * This structure is used to describe the behavior of > > - * a certain cooling device on a certain trip point > > - * in a certain thermal zone > > - */ > > -struct thermal_instance { > > - int id; > > - char name[THERMAL_NAME_LENGTH]; > > - struct thermal_zone_device *tz; > > - struct thermal_cooling_device *cdev; > > - int trip; > > - unsigned long upper; /* Highest cooling state for this trip point */ > > - unsigned long lower; /* Lowest cooling state for this trip point */ > > - unsigned long target; /* expected cooling state */ > > - char attr_name[THERMAL_NAME_LENGTH]; > > - struct device_attribute attr; > > - struct list_head tz_node; /* node in tz->thermal_instances */ > > - struct list_head cdev_node; /* node in cdev->thermal_instances */ > > -}; > > - > > static DEFINE_IDR(thermal_tz_idr); > > static DEFINE_IDR(thermal_cdev_idr); > > static DEFINE_MUTEX(thermal_idr_lock); > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > > index 8611e3e..f25df23 100644 > > --- a/include/linux/thermal.h > > +++ b/include/linux/thermal.h > > @@ -33,6 +33,9 @@ > > #define THERMAL_MAX_TRIPS 12 > > #define THERMAL_NAME_LENGTH 20 > > > > +/* Initial state of a cooling device during binding */ > > +#define THERMAL_NO_TARGET -1UL > > + > > /* No upper/lower limit requirement */ > > #define THERMAL_NO_LIMIT -1UL > > > > @@ -164,6 +167,26 @@ struct thermal_zone_device { > > struct delayed_work poll_queue; > > }; > > > > +/* > > + * This structure is used to describe the behavior of > > + * a certain cooling device on a certain trip point > > + * in a certain thermal zone > > + */ > > +struct thermal_instance { > > + int id; > > + char name[THERMAL_NAME_LENGTH]; > > + struct thermal_zone_device *tz; > > + struct thermal_cooling_device *cdev; > > + int trip; > > + unsigned long upper; /* Highest cooling state for this trip point */ > > + unsigned long lower; /* Lowest cooling state for this trip point */ > > + unsigned long target; /* expected cooling state */ > > + char attr_name[THERMAL_NAME_LENGTH]; > > + struct device_attribute attr; > > + struct list_head tz_node; /* node in tz->thermal_instances */ > > + struct list_head cdev_node; /* node in cdev->thermal_instances */ > > +}; > > + > > as this structure is used internally only, I'm thinking if we can rename > drivers/thermal/thermal_sys.c to drivers/thermal/thermal_core.c, > and introduce drivers/thermal/thermal_core.h for these internal stuff. > what do you think? Yes agree with you. Also, we can keep the sysfs things in thermal_sys.c and rest of the things in thermal_core.c, and have a thermal_core.h also. (This is how the power supply subsystem does it) I will include this clean up, as part of v2, if you are Ok with this. Other things; I was thinking is 'removal of netlink things' from thermal_sys.c Removing the hwmon related code (the thermal subsystem has grown quite a bit and provides more thermal functionalities than Hwmon) So, why do we need CONFIG_HWMON inside thermal subsystem ? If all of us agree, I am Ok to remove this also. Thanks, Durga
On ?, 2012-08-16 at 00:19 -0600, R, Durgadoss wrote: > Hi Rui, > > > > -----Original Message----- > > From: Zhang, Rui > > Sent: Thursday, August 16, 2012 11:44 AM > > To: R, Durgadoss > > Cc: lenb@kernel.org; rjw@sisk.pl; linux-acpi@vger.kernel.org; linux- > > pm@vger.kernel.org; eduardo.valentin@ti.com; amit.kachhap@linaro.org; > > wni@nvidia.com > > Subject: Re: [PATCH 02/13] Thermal: Move thermal_instance to thermal.h > > > > On ?, 2012-08-09 at 18:15 +0530, Durgadoss R wrote: > > > This patch moves the thermal_instance structure > > > to thermal.h so that thermal management files > > > (other than thermal_sys.c) can also access it. > > > > > > Signed-off-by: Durgadoss R <durgadoss.r@intel.com> > > > --- > > > drivers/thermal/thermal_sys.c | 21 --------------------- > > > include/linux/thermal.h | 23 +++++++++++++++++++++++ > > > 2 files changed, 23 insertions(+), 21 deletions(-) > > > > > > diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c > > > index 5be8728..a0e20f9 100644 > > > --- a/drivers/thermal/thermal_sys.c > > > +++ b/drivers/thermal/thermal_sys.c > > > @@ -41,27 +41,6 @@ MODULE_AUTHOR("Zhang Rui"); > > > MODULE_DESCRIPTION("Generic thermal management sysfs support"); > > > MODULE_LICENSE("GPL"); > > > > > > -#define THERMAL_NO_TARGET -1UL > > > -/* > > > - * This structure is used to describe the behavior of > > > - * a certain cooling device on a certain trip point > > > - * in a certain thermal zone > > > - */ > > > -struct thermal_instance { > > > - int id; > > > - char name[THERMAL_NAME_LENGTH]; > > > - struct thermal_zone_device *tz; > > > - struct thermal_cooling_device *cdev; > > > - int trip; > > > - unsigned long upper; /* Highest cooling state for this trip point */ > > > - unsigned long lower; /* Lowest cooling state for this trip point */ > > > - unsigned long target; /* expected cooling state */ > > > - char attr_name[THERMAL_NAME_LENGTH]; > > > - struct device_attribute attr; > > > - struct list_head tz_node; /* node in tz->thermal_instances */ > > > - struct list_head cdev_node; /* node in cdev->thermal_instances */ > > > -}; > > > - > > > static DEFINE_IDR(thermal_tz_idr); > > > static DEFINE_IDR(thermal_cdev_idr); > > > static DEFINE_MUTEX(thermal_idr_lock); > > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > > > index 8611e3e..f25df23 100644 > > > --- a/include/linux/thermal.h > > > +++ b/include/linux/thermal.h > > > @@ -33,6 +33,9 @@ > > > #define THERMAL_MAX_TRIPS 12 > > > #define THERMAL_NAME_LENGTH 20 > > > > > > +/* Initial state of a cooling device during binding */ > > > +#define THERMAL_NO_TARGET -1UL > > > + > > > /* No upper/lower limit requirement */ > > > #define THERMAL_NO_LIMIT -1UL > > > > > > @@ -164,6 +167,26 @@ struct thermal_zone_device { > > > struct delayed_work poll_queue; > > > }; > > > > > > +/* > > > + * This structure is used to describe the behavior of > > > + * a certain cooling device on a certain trip point > > > + * in a certain thermal zone > > > + */ > > > +struct thermal_instance { > > > + int id; > > > + char name[THERMAL_NAME_LENGTH]; > > > + struct thermal_zone_device *tz; > > > + struct thermal_cooling_device *cdev; > > > + int trip; > > > + unsigned long upper; /* Highest cooling state for this trip point */ > > > + unsigned long lower; /* Lowest cooling state for this trip point */ > > > + unsigned long target; /* expected cooling state */ > > > + char attr_name[THERMAL_NAME_LENGTH]; > > > + struct device_attribute attr; > > > + struct list_head tz_node; /* node in tz->thermal_instances */ > > > + struct list_head cdev_node; /* node in cdev->thermal_instances */ > > > +}; > > > + > > > > as this structure is used internally only, I'm thinking if we can rename > > drivers/thermal/thermal_sys.c to drivers/thermal/thermal_core.c, > > and introduce drivers/thermal/thermal_core.h for these internal stuff. > > what do you think? > > Yes agree with you. > Also, we can keep the sysfs things in thermal_sys.c > and rest of the things in thermal_core.c, and have a thermal_core.h also. > (This is how the power supply subsystem does it) > > I will include this clean up, as part of v2, if you are Ok with this. > yes, please go ahead. > Other things; > I was thinking is 'removal of netlink things' from > thermal_sys.c and where to move it to? > > Removing the hwmon related code (the thermal subsystem has grown > quite a bit and provides more thermal functionalities than Hwmon) > So, why do we need CONFIG_HWMON inside thermal subsystem ? > If all of us agree, I am Ok to remove this also. > we need Jean's opinion on this. But anyway, we can do this at anytime, if really needed. thanks, rui -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rui, [cut.] > > > > +/* > > > > + * This structure is used to describe the behavior of > > > > + * a certain cooling device on a certain trip point > > > > + * in a certain thermal zone > > > > + */ > > > > +struct thermal_instance { > > > > + int id; > > > > + char name[THERMAL_NAME_LENGTH]; > > > > + struct thermal_zone_device *tz; > > > > + struct thermal_cooling_device *cdev; > > > > + int trip; > > > > + unsigned long upper; /* Highest cooling state for this trip point */ > > > > + unsigned long lower; /* Lowest cooling state for this trip point */ > > > > + unsigned long target; /* expected cooling state */ > > > > + char attr_name[THERMAL_NAME_LENGTH]; > > > > + struct device_attribute attr; > > > > + struct list_head tz_node; /* node in tz->thermal_instances */ > > > > + struct list_head cdev_node; /* node in cdev->thermal_instances */ > > > > +}; > > > > + > > > > > > as this structure is used internally only, I'm thinking if we can rename > > > drivers/thermal/thermal_sys.c to drivers/thermal/thermal_core.c, > > > and introduce drivers/thermal/thermal_core.h for these internal stuff. > > > what do you think? > > > > Yes agree with you. > > Also, we can keep the sysfs things in thermal_sys.c > > and rest of the things in thermal_core.c, and have a thermal_core.h also. > > (This is how the power supply subsystem does it) > > > > I will include this clean up, as part of v2, if you are Ok with this. > > > yes, please go ahead. Ok. I will include this change. > > > Other things; > > I was thinking is 'removal of netlink things' from > > thermal_sys.c > > and where to move it to? I was thinking of completely removing this, as raw netlink usage is phasing out, and kobj_uevent () is being used increasingly. But we will keep it as a separate change, and not club with this one. > > > > Removing the hwmon related code (the thermal subsystem has grown > > quite a bit and provides more thermal functionalities than Hwmon) > > So, why do we need CONFIG_HWMON inside thermal subsystem ? > > If all of us agree, I am Ok to remove this also. > > > we need Jean's opinion on this. > But anyway, we can do this at anytime, if really needed. Yes, will wait for Jean's thoughts.. Thanks, Durga > > thanks, > rui
On ?, 2012-08-16 at 00:31 -0600, R, Durgadoss wrote: > Hi Rui, > > [cut.] > > > > > +/* > > > > > + * This structure is used to describe the behavior of > > > > > + * a certain cooling device on a certain trip point > > > > > + * in a certain thermal zone > > > > > + */ > > > > > +struct thermal_instance { > > > > > + int id; > > > > > + char name[THERMAL_NAME_LENGTH]; > > > > > + struct thermal_zone_device *tz; > > > > > + struct thermal_cooling_device *cdev; > > > > > + int trip; > > > > > + unsigned long upper; /* Highest cooling state for this trip point */ > > > > > + unsigned long lower; /* Lowest cooling state for this trip point */ > > > > > + unsigned long target; /* expected cooling state */ > > > > > + char attr_name[THERMAL_NAME_LENGTH]; > > > > > + struct device_attribute attr; > > > > > + struct list_head tz_node; /* node in tz->thermal_instances */ > > > > > + struct list_head cdev_node; /* node in cdev->thermal_instances */ > > > > > +}; > > > > > + > > > > > > > > as this structure is used internally only, I'm thinking if we can rename > > > > drivers/thermal/thermal_sys.c to drivers/thermal/thermal_core.c, > > > > and introduce drivers/thermal/thermal_core.h for these internal stuff. > > > > what do you think? > > > > > > Yes agree with you. > > > Also, we can keep the sysfs things in thermal_sys.c > > > and rest of the things in thermal_core.c, and have a thermal_core.h also. > > > (This is how the power supply subsystem does it) > > > > > > I will include this clean up, as part of v2, if you are Ok with this. > > > > > yes, please go ahead. > > Ok. I will include this change. > > > > > > Other things; > > > I was thinking is 'removal of netlink things' from > > > thermal_sys.c > > > > and where to move it to? > > I was thinking of completely removing this, as raw netlink > usage is phasing out, and kobj_uevent () is being used > increasingly. > > But we will keep it as a separate change, and not club with this one. > We need to hold this for a while as I'm not sure if someone is using this or not. IMO, you can introduce a Config option to enable/disable the netlink events for now, and marking it as deprecated. thanks, rui > > > > > > Removing the hwmon related code (the thermal subsystem has grown > > > quite a bit and provides more thermal functionalities than Hwmon) > > > So, why do we need CONFIG_HWMON inside thermal subsystem ? > > > If all of us agree, I am Ok to remove this also. > > > > > we need Jean's opinion on this. > > But anyway, we can do this at anytime, if really needed. > > Yes, will wait for Jean's thoughts.. > > Thanks, > Durga > > > > > thanks, > > rui -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, On Thu, Aug 16, 2012 at 03:12:32PM +0800, Zhang Rui wrote: > On ?, 2012-08-16 at 00:31 -0600, R, Durgadoss wrote: > > Hi Rui, > > > > [cut.] > > > > > > +/* > > > > > > + * This structure is used to describe the behavior of > > > > > > + * a certain cooling device on a certain trip point > > > > > > + * in a certain thermal zone > > > > > > + */ > > > > > > +struct thermal_instance { > > > > > > + int id; > > > > > > + char name[THERMAL_NAME_LENGTH]; > > > > > > + struct thermal_zone_device *tz; > > > > > > + struct thermal_cooling_device *cdev; > > > > > > + int trip; > > > > > > + unsigned long upper; /* Highest cooling state for this trip point */ > > > > > > + unsigned long lower; /* Lowest cooling state for this trip point */ > > > > > > + unsigned long target; /* expected cooling state */ > > > > > > + char attr_name[THERMAL_NAME_LENGTH]; > > > > > > + struct device_attribute attr; > > > > > > + struct list_head tz_node; /* node in tz->thermal_instances */ > > > > > > + struct list_head cdev_node; /* node in cdev->thermal_instances */ > > > > > > +}; > > > > > > + > > > > > > > > > > as this structure is used internally only, I'm thinking if we can rename > > > > > drivers/thermal/thermal_sys.c to drivers/thermal/thermal_core.c, > > > > > and introduce drivers/thermal/thermal_core.h for these internal stuff. > > > > > what do you think? > > > > > > > > Yes agree with you. > > > > Also, we can keep the sysfs things in thermal_sys.c > > > > and rest of the things in thermal_core.c, and have a thermal_core.h also. > > > > (This is how the power supply subsystem does it) > > > > > > > > I will include this clean up, as part of v2, if you are Ok with this. > > > > > > > yes, please go ahead. I also second this step. This split makes a lot of sense. > > > > Ok. I will include this change. > > > > > > > > > Other things; > > > > I was thinking is 'removal of netlink things' from > > > > thermal_sys.c > > > > > > and where to move it to? > > > > I was thinking of completely removing this, as raw netlink > > usage is phasing out, and kobj_uevent () is being used > > increasingly. > > > > But we will keep it as a separate change, and not club with this one. > > > We need to hold this for a while as I'm not sure if someone is using > this or not. > IMO, you can introduce a Config option to enable/disable the netlink > events for now, and marking it as deprecated. At least from my side, I don't have any legacy application using the netlink :-) How about you guys, what are the known applications using this link? In any case, for me, at least we need to have a standard notification system, for monitoring, debugging and also in case applications need to react on thermal events. > > thanks, > rui > > > > > > > > Removing the hwmon related code (the thermal subsystem has grown > > > > quite a bit and provides more thermal functionalities than Hwmon) > > > > So, why do we need CONFIG_HWMON inside thermal subsystem ? > > > > If all of us agree, I am Ok to remove this also. > > > > > > > we need Jean's opinion on this. > > > But anyway, we can do this at anytime, if really needed. > > > > Yes, will wait for Jean's thoughts.. What where the original design decisions to have these two linked together? > > > > Thanks, > > Durga > > > > > > > > thanks, > > > rui > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 5be8728..a0e20f9 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -41,27 +41,6 @@ MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); -#define THERMAL_NO_TARGET -1UL -/* - * This structure is used to describe the behavior of - * a certain cooling device on a certain trip point - * in a certain thermal zone - */ -struct thermal_instance { - int id; - char name[THERMAL_NAME_LENGTH]; - struct thermal_zone_device *tz; - struct thermal_cooling_device *cdev; - int trip; - unsigned long upper; /* Highest cooling state for this trip point */ - unsigned long lower; /* Lowest cooling state for this trip point */ - unsigned long target; /* expected cooling state */ - char attr_name[THERMAL_NAME_LENGTH]; - struct device_attribute attr; - struct list_head tz_node; /* node in tz->thermal_instances */ - struct list_head cdev_node; /* node in cdev->thermal_instances */ -}; - static DEFINE_IDR(thermal_tz_idr); static DEFINE_IDR(thermal_cdev_idr); static DEFINE_MUTEX(thermal_idr_lock); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 8611e3e..f25df23 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -33,6 +33,9 @@ #define THERMAL_MAX_TRIPS 12 #define THERMAL_NAME_LENGTH 20 +/* Initial state of a cooling device during binding */ +#define THERMAL_NO_TARGET -1UL + /* No upper/lower limit requirement */ #define THERMAL_NO_LIMIT -1UL @@ -164,6 +167,26 @@ struct thermal_zone_device { struct delayed_work poll_queue; }; +/* + * This structure is used to describe the behavior of + * a certain cooling device on a certain trip point + * in a certain thermal zone + */ +struct thermal_instance { + int id; + char name[THERMAL_NAME_LENGTH]; + struct thermal_zone_device *tz; + struct thermal_cooling_device *cdev; + int trip; + unsigned long upper; /* Highest cooling state for this trip point */ + unsigned long lower; /* Lowest cooling state for this trip point */ + unsigned long target; /* expected cooling state */ + char attr_name[THERMAL_NAME_LENGTH]; + struct device_attribute attr; + struct list_head tz_node; /* node in tz->thermal_instances */ + struct list_head cdev_node; /* node in cdev->thermal_instances */ +}; + struct thermal_genl_event { u32 orig; enum events event;
This patch moves the thermal_instance structure to thermal.h so that thermal management files (other than thermal_sys.c) can also access it. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> --- drivers/thermal/thermal_sys.c | 21 --------------------- include/linux/thermal.h | 23 +++++++++++++++++++++++ 2 files changed, 23 insertions(+), 21 deletions(-)