| Message ID | 1345099767-13467-2-git-send-email-jonghwa3.lee@samsung.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
On Thursday, August 16, 2012, Jonghwa Lee wrote: > This patch adds sysfs node which can be used to get information of frequency > transition. It represents transition table which contains total number of transition of > each freqeuncy state and time spent. It is inspired CPUFREQ's status driver. First off, please add kerneldoc comments to the new functions. It would be good to know what they are intended to do. Second, multiline files in sysfs are generally not welcome. Perhaps this should go into debugfs instead? Rafael > Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> > --- > drivers/devfreq/devfreq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++ > include/linux/devfreq.h | 9 +++++ > 2 files changed, 98 insertions(+), 0 deletions(-) > > diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c > index 70c31d4..8b53eaf 100644 > --- a/drivers/devfreq/devfreq.c > +++ b/drivers/devfreq/devfreq.c > @@ -72,6 +72,41 @@ static struct devfreq *find_device_devfreq(struct device *dev) > return ERR_PTR(-ENODEV); > } > > +int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq) > +{ > + int lev; > + > + for (lev = 0; lev < devfreq->profile->max_state; lev++) > + if (freq == devfreq->profile->freq_table[lev]) > + return lev; > + > + return -EINVAL; > +} > + > +int devfreq_update_status(struct devfreq *devfreq, unsigned long freq) > +{ > + int lev, prev_lev; > + unsigned long cur_time; > + > + lev = devfreq_get_freq_level(devfreq, freq); > + if (lev < 0) > + return lev; > + > + cur_time = jiffies; > + devfreq->time_in_state[lev] += > + cur_time - devfreq->last_stat_updated; > + if (freq != devfreq->previous_freq) { > + prev_lev = devfreq_get_freq_level(devfreq, > + devfreq->previous_freq); > + devfreq->trans_table[(prev_lev * > + devfreq->profile->max_state) + lev]++; > + devfreq->total_trans++; > + } > + devfreq->last_stat_updated = cur_time; > + > + return 0; > +} > + > /** > * update_devfreq() - Reevaluate the device and configure frequency. > * @devfreq: the devfreq instance. > @@ -115,6 +150,10 @@ int update_devfreq(struct devfreq *devfreq) > err = devfreq->profile->target(devfreq->dev.parent, &freq, flags); > if (err) > return err; > + if (devfreq->profile->freq_table) > + if (devfreq_update_status(devfreq, freq)) > + dev_err(&devfreq->dev, > + "Couldn't update frequency transition information.\n"); > > devfreq->previous_freq = freq; > return err; > @@ -390,6 +429,15 @@ struct devfreq *devfreq_add_device(struct device *dev, > = msecs_to_jiffies(devfreq->profile->polling_ms); > devfreq->nb.notifier_call = devfreq_notifier_call; > > + devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) * > + devfreq->profile->max_state * > + devfreq->profile->max_state, > + GFP_KERNEL); > + devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned int) * > + devfreq->profile->max_state, > + GFP_KERNEL); > + devfreq->last_stat_updated = jiffies; > + > dev_set_name(&devfreq->dev, dev_name(dev)); > err = device_register(&devfreq->dev); > if (err) { > @@ -587,6 +635,46 @@ static ssize_t show_max_freq(struct device *dev, struct device_attribute *attr, > return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq); > } > > +static ssize_t show_trans_table(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct devfreq *devfreq = to_devfreq(dev); > + ssize_t len; > + int i, j, err; > + > + err = devfreq_update_status(devfreq, devfreq->previous_freq); > + if (err) > + return 0; > + > + len = sprintf(buf, " From : To\n"); > + len += sprintf(buf + len, " :"); > + for (i = 0; i < devfreq->profile->max_state; i++) > + len += sprintf(buf + len, "%8u", > + devfreq->profile->freq_table[i]); > + > + len += sprintf(buf + len, " time(ms)\n"); > + > + for (i = 0; i < devfreq->profile->max_state; i++) { > + if (devfreq->profile->freq_table[i] > + == devfreq->previous_freq) { > + len += sprintf(buf + len, "*"); > + } else { > + len += sprintf(buf + len, " "); > + } > + len += sprintf(buf + len, "%8u:", > + devfreq->profile->freq_table[i]); > + for (j = 0; j < devfreq->profile->max_state; j++) > + len += sprintf(buf + len, "%8u", > + devfreq->trans_table[(i * 3) + j]); > + len += sprintf(buf + len, "%10u\n", > + jiffies_to_msecs(devfreq->time_in_state[i])); > + } > + > + len += sprintf(buf + len, "Total transition : %u\n", > + devfreq->total_trans); > + return len; > +} > + > static struct device_attribute devfreq_attrs[] = { > __ATTR(governor, S_IRUGO, show_governor, NULL), > __ATTR(cur_freq, S_IRUGO, show_freq, NULL), > @@ -595,6 +683,7 @@ static struct device_attribute devfreq_attrs[] = { > store_polling_interval), > __ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq), > __ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq), > + __ATTR(trans_stat, S_IRUGO, show_trans_table, NULL), > { }, > }; > > diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h > index 281c72a..30dc0d8 100644 > --- a/include/linux/devfreq.h > +++ b/include/linux/devfreq.h > @@ -80,6 +80,9 @@ struct devfreq_dev_profile { > int (*get_dev_status)(struct device *dev, > struct devfreq_dev_status *stat); > void (*exit)(struct device *dev); > + > + unsigned int *freq_table; > + unsigned int max_state; > }; > > /** > @@ -164,6 +167,12 @@ struct devfreq { > > unsigned long min_freq; > unsigned long max_freq; > + > + /* information for device freqeuncy transition */ > + unsigned int total_trans; > + unsigned int *trans_table; > + unsigned long *time_in_state; > + unsigned long last_stat_updated; > }; > > #if defined(CONFIG_PM_DEVFREQ) > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Rafael. On 2012? 08? 24? 07:21, Rafael J. Wysocki wrote: > On Thursday, August 16, 2012, Jonghwa Lee wrote: >> This patch adds sysfs node which can be used to get information of frequency >> transition. It represents transition table which contains total number of transition of >> each freqeuncy state and time spent. It is inspired CPUFREQ's status driver. > First off, please add kerneldoc comments to the new functions. > It would be good to know what they are intended to do. Okay, I'll add document for describing what it'll be used to . > Second, multiline files in sysfs are generally not welcome. Perhaps this > should go into debugfs instead? > > Rafael Yes, you're right. I didn't know the sysfs constraints until I checked debugfs kerneldoc. I'll update it either. > >> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> >> --- >> drivers/devfreq/devfreq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++ >> include/linux/devfreq.h | 9 +++++ >> 2 files changed, 98 insertions(+), 0 deletions(-) >> >> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c >> index 70c31d4..8b53eaf 100644 >> --- a/drivers/devfreq/devfreq.c >> +++ b/drivers/devfreq/devfreq.c >> @@ -72,6 +72,41 @@ static struct devfreq *find_device_devfreq(struct device *dev) >> return ERR_PTR(-ENODEV); >> } >> >> +int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq) >> +{ >> + int lev; >> + >> + for (lev = 0; lev < devfreq->profile->max_state; lev++) >> + if (freq == devfreq->profile->freq_table[lev]) >> + return lev; >> + >> + return -EINVAL; >> +} >> + >> +int devfreq_update_status(struct devfreq *devfreq, unsigned long freq) >> +{ >> + int lev, prev_lev; >> + unsigned long cur_time; >> + >> + lev = devfreq_get_freq_level(devfreq, freq); >> + if (lev < 0) >> + return lev; >> + >> + cur_time = jiffies; >> + devfreq->time_in_state[lev] += >> + cur_time - devfreq->last_stat_updated; >> + if (freq != devfreq->previous_freq) { >> + prev_lev = devfreq_get_freq_level(devfreq, >> + devfreq->previous_freq); >> + devfreq->trans_table[(prev_lev * >> + devfreq->profile->max_state) + lev]++; >> + devfreq->total_trans++; >> + } >> + devfreq->last_stat_updated = cur_time; >> + >> + return 0; >> +} >> + >> /** >> * update_devfreq() - Reevaluate the device and configure frequency. >> * @devfreq: the devfreq instance. >> @@ -115,6 +150,10 @@ int update_devfreq(struct devfreq *devfreq) >> err = devfreq->profile->target(devfreq->dev.parent, &freq, flags); >> if (err) >> return err; >> + if (devfreq->profile->freq_table) >> + if (devfreq_update_status(devfreq, freq)) >> + dev_err(&devfreq->dev, >> + "Couldn't update frequency transition information.\n"); >> >> devfreq->previous_freq = freq; >> return err; >> @@ -390,6 +429,15 @@ struct devfreq *devfreq_add_device(struct device *dev, >> = msecs_to_jiffies(devfreq->profile->polling_ms); >> devfreq->nb.notifier_call = devfreq_notifier_call; >> >> + devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) * >> + devfreq->profile->max_state * >> + devfreq->profile->max_state, >> + GFP_KERNEL); >> + devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned int) * >> + devfreq->profile->max_state, >> + GFP_KERNEL); >> + devfreq->last_stat_updated = jiffies; >> + >> dev_set_name(&devfreq->dev, dev_name(dev)); >> err = device_register(&devfreq->dev); >> if (err) { >> @@ -587,6 +635,46 @@ static ssize_t show_max_freq(struct device *dev, struct device_attribute *attr, >> return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq); >> } >> >> +static ssize_t show_trans_table(struct device *dev, struct device_attribute *attr, >> + char *buf) >> +{ >> + struct devfreq *devfreq = to_devfreq(dev); >> + ssize_t len; >> + int i, j, err; >> + >> + err = devfreq_update_status(devfreq, devfreq->previous_freq); >> + if (err) >> + return 0; >> + >> + len = sprintf(buf, " From : To\n"); >> + len += sprintf(buf + len, " :"); >> + for (i = 0; i < devfreq->profile->max_state; i++) >> + len += sprintf(buf + len, "%8u", >> + devfreq->profile->freq_table[i]); >> + >> + len += sprintf(buf + len, " time(ms)\n"); >> + >> + for (i = 0; i < devfreq->profile->max_state; i++) { >> + if (devfreq->profile->freq_table[i] >> + == devfreq->previous_freq) { >> + len += sprintf(buf + len, "*"); >> + } else { >> + len += sprintf(buf + len, " "); >> + } >> + len += sprintf(buf + len, "%8u:", >> + devfreq->profile->freq_table[i]); >> + for (j = 0; j < devfreq->profile->max_state; j++) >> + len += sprintf(buf + len, "%8u", >> + devfreq->trans_table[(i * 3) + j]); >> + len += sprintf(buf + len, "%10u\n", >> + jiffies_to_msecs(devfreq->time_in_state[i])); >> + } >> + >> + len += sprintf(buf + len, "Total transition : %u\n", >> + devfreq->total_trans); >> + return len; >> +} >> + >> static struct device_attribute devfreq_attrs[] = { >> __ATTR(governor, S_IRUGO, show_governor, NULL), >> __ATTR(cur_freq, S_IRUGO, show_freq, NULL), >> @@ -595,6 +683,7 @@ static struct device_attribute devfreq_attrs[] = { >> store_polling_interval), >> __ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq), >> __ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq), >> + __ATTR(trans_stat, S_IRUGO, show_trans_table, NULL), >> { }, >> }; >> >> diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h >> index 281c72a..30dc0d8 100644 >> --- a/include/linux/devfreq.h >> +++ b/include/linux/devfreq.h >> @@ -80,6 +80,9 @@ struct devfreq_dev_profile { >> int (*get_dev_status)(struct device *dev, >> struct devfreq_dev_status *stat); >> void (*exit)(struct device *dev); >> + >> + unsigned int *freq_table; >> + unsigned int max_state; >> }; >> >> /** >> @@ -164,6 +167,12 @@ struct devfreq { >> >> unsigned long min_freq; >> unsigned long max_freq; >> + >> + /* information for device freqeuncy transition */ >> + unsigned int total_trans; >> + unsigned int *trans_table; >> + unsigned long *time_in_state; >> + unsigned long last_stat_updated; >> }; >> >> #if defined(CONFIG_PM_DEVFREQ) >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-pm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 70c31d4..8b53eaf 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -72,6 +72,41 @@ static struct devfreq *find_device_devfreq(struct device *dev) return ERR_PTR(-ENODEV); } +int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq) +{ + int lev; + + for (lev = 0; lev < devfreq->profile->max_state; lev++) + if (freq == devfreq->profile->freq_table[lev]) + return lev; + + return -EINVAL; +} + +int devfreq_update_status(struct devfreq *devfreq, unsigned long freq) +{ + int lev, prev_lev; + unsigned long cur_time; + + lev = devfreq_get_freq_level(devfreq, freq); + if (lev < 0) + return lev; + + cur_time = jiffies; + devfreq->time_in_state[lev] += + cur_time - devfreq->last_stat_updated; + if (freq != devfreq->previous_freq) { + prev_lev = devfreq_get_freq_level(devfreq, + devfreq->previous_freq); + devfreq->trans_table[(prev_lev * + devfreq->profile->max_state) + lev]++; + devfreq->total_trans++; + } + devfreq->last_stat_updated = cur_time; + + return 0; +} + /** * update_devfreq() - Reevaluate the device and configure frequency. * @devfreq: the devfreq instance. @@ -115,6 +150,10 @@ int update_devfreq(struct devfreq *devfreq) err = devfreq->profile->target(devfreq->dev.parent, &freq, flags); if (err) return err; + if (devfreq->profile->freq_table) + if (devfreq_update_status(devfreq, freq)) + dev_err(&devfreq->dev, + "Couldn't update frequency transition information.\n"); devfreq->previous_freq = freq; return err; @@ -390,6 +429,15 @@ struct devfreq *devfreq_add_device(struct device *dev, = msecs_to_jiffies(devfreq->profile->polling_ms); devfreq->nb.notifier_call = devfreq_notifier_call; + devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) * + devfreq->profile->max_state * + devfreq->profile->max_state, + GFP_KERNEL); + devfreq->time_in_state = devm_kzalloc(dev, sizeof(unsigned int) * + devfreq->profile->max_state, + GFP_KERNEL); + devfreq->last_stat_updated = jiffies; + dev_set_name(&devfreq->dev, dev_name(dev)); err = device_register(&devfreq->dev); if (err) { @@ -587,6 +635,46 @@ static ssize_t show_max_freq(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq); } +static ssize_t show_trans_table(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct devfreq *devfreq = to_devfreq(dev); + ssize_t len; + int i, j, err; + + err = devfreq_update_status(devfreq, devfreq->previous_freq); + if (err) + return 0; + + len = sprintf(buf, " From : To\n"); + len += sprintf(buf + len, " :"); + for (i = 0; i < devfreq->profile->max_state; i++) + len += sprintf(buf + len, "%8u", + devfreq->profile->freq_table[i]); + + len += sprintf(buf + len, " time(ms)\n"); + + for (i = 0; i < devfreq->profile->max_state; i++) { + if (devfreq->profile->freq_table[i] + == devfreq->previous_freq) { + len += sprintf(buf + len, "*"); + } else { + len += sprintf(buf + len, " "); + } + len += sprintf(buf + len, "%8u:", + devfreq->profile->freq_table[i]); + for (j = 0; j < devfreq->profile->max_state; j++) + len += sprintf(buf + len, "%8u", + devfreq->trans_table[(i * 3) + j]); + len += sprintf(buf + len, "%10u\n", + jiffies_to_msecs(devfreq->time_in_state[i])); + } + + len += sprintf(buf + len, "Total transition : %u\n", + devfreq->total_trans); + return len; +} + static struct device_attribute devfreq_attrs[] = { __ATTR(governor, S_IRUGO, show_governor, NULL), __ATTR(cur_freq, S_IRUGO, show_freq, NULL), @@ -595,6 +683,7 @@ static struct device_attribute devfreq_attrs[] = { store_polling_interval), __ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq), __ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq), + __ATTR(trans_stat, S_IRUGO, show_trans_table, NULL), { }, }; diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 281c72a..30dc0d8 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -80,6 +80,9 @@ struct devfreq_dev_profile { int (*get_dev_status)(struct device *dev, struct devfreq_dev_status *stat); void (*exit)(struct device *dev); + + unsigned int *freq_table; + unsigned int max_state; }; /** @@ -164,6 +167,12 @@ struct devfreq { unsigned long min_freq; unsigned long max_freq; + + /* information for device freqeuncy transition */ + unsigned int total_trans; + unsigned int *trans_table; + unsigned long *time_in_state; + unsigned long last_stat_updated; }; #if defined(CONFIG_PM_DEVFREQ)
This patch adds sysfs node which can be used to get information of frequency transition. It represents transition table which contains total number of transition of each freqeuncy state and time spent. It is inspired CPUFREQ's status driver. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> --- drivers/devfreq/devfreq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/devfreq.h | 9 +++++ 2 files changed, 98 insertions(+), 0 deletions(-)