| Message ID | 1377668719-8602-2-git-send-email-ch.naveen@samsung.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Zhang Rui |
| Headers | show |
On Wed, Aug 28, 2013 at 11:15 AM, Naveen Krishna Chatradhi <ch.naveen@samsung.com> wrote: > The FALL interrupt related en, status bits are available at an offset of > 16 on INTEN, INTSTAT registers and at an offset of > 12 on INTCLEAR register. > > This patch corrects the same for exyns5250 and exynos5440 > > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> The changes looks fine. Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Thanks, Amit > --- > drivers/thermal/samsung/exynos_tmu.c | 2 +- > drivers/thermal/samsung/exynos_tmu.h | 2 ++ > drivers/thermal/samsung/exynos_tmu_data.c | 2 ++ > drivers/thermal/samsung/exynos_tmu_data.h | 3 ++- > 4 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index ec01dfe..d201ed8 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -265,7 +265,7 @@ skip_calib_data: > data->base + reg->threshold_th1); > > writel((reg->inten_rise_mask << reg->inten_rise_shift) | > - (reg->inten_fall_mask << reg->inten_fall_shift), > + (reg->inten_fall_mask << reg->intclr_fall_shift), > data->base + reg->tmu_intclear); > > /* if last threshold limit is also present */ > diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h > index b364c9e..7c6c34a 100644 > --- a/drivers/thermal/samsung/exynos_tmu.h > +++ b/drivers/thermal/samsung/exynos_tmu.h > @@ -134,6 +134,7 @@ enum soc_type { > * @inten_fall3_shift: shift bits of falling 3 interrupt bits. > * @tmu_intstat: Register containing the interrupt status values. > * @tmu_intclear: Register for clearing the raised interrupt status. > + * @intclr_fall_shift: shift bits for interrupt clear fall 0 > * @emul_con: TMU emulation controller register. > * @emul_temp_shift: shift bits of emulation temperature. > * @emul_time_shift: shift bits of emulation time. > @@ -204,6 +205,7 @@ struct exynos_tmu_registers { > u32 tmu_intstat; > > u32 tmu_intclear; > + u32 intclr_fall_shift; > > u32 emul_con; > u32 emul_temp_shift; > diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c > index 9002499..23fea23 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.c > +++ b/drivers/thermal/samsung/exynos_tmu_data.c > @@ -122,6 +122,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = { > .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, > .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, > .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, > + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, > .emul_con = EXYNOS_EMUL_CON, > .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, > .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, > @@ -210,6 +211,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { > .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, > .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, > .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, > + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, > .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, > .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, > .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, > diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h > index dc7feb5..8788a87 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.h > +++ b/drivers/thermal/samsung/exynos_tmu_data.h > @@ -69,9 +69,10 @@ > #define EXYNOS_TMU_RISE_INT_MASK 0x111 > #define EXYNOS_TMU_RISE_INT_SHIFT 0 > #define EXYNOS_TMU_FALL_INT_MASK 0x111 > -#define EXYNOS_TMU_FALL_INT_SHIFT 12 > +#define EXYNOS_TMU_FALL_INT_SHIFT 16 > #define EXYNOS_TMU_CLEAR_RISE_INT 0x111 > #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) > +#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12 > #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 > #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 > #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html On Wed, Aug 28, 2013 at 11:15 AM, Naveen Krishna Chatradhi <ch.naveen@samsung.com> wrote: > The FALL interrupt related en, status bits are available at an offset of > 16 on INTEN, INTSTAT registers and at an offset of > 12 on INTCLEAR register. > > This patch corrects the same for exyns5250 and exynos5440 > > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> > --- > drivers/thermal/samsung/exynos_tmu.c | 2 +- > drivers/thermal/samsung/exynos_tmu.h | 2 ++ > drivers/thermal/samsung/exynos_tmu_data.c | 2 ++ > drivers/thermal/samsung/exynos_tmu_data.h | 3 ++- > 4 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index ec01dfe..d201ed8 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -265,7 +265,7 @@ skip_calib_data: > data->base + reg->threshold_th1); > > writel((reg->inten_rise_mask << reg->inten_rise_shift) | > - (reg->inten_fall_mask << reg->inten_fall_shift), > + (reg->inten_fall_mask << reg->intclr_fall_shift), > data->base + reg->tmu_intclear); > > /* if last threshold limit is also present */ > diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h > index b364c9e..7c6c34a 100644 > --- a/drivers/thermal/samsung/exynos_tmu.h > +++ b/drivers/thermal/samsung/exynos_tmu.h > @@ -134,6 +134,7 @@ enum soc_type { > * @inten_fall3_shift: shift bits of falling 3 interrupt bits. > * @tmu_intstat: Register containing the interrupt status values. > * @tmu_intclear: Register for clearing the raised interrupt status. > + * @intclr_fall_shift: shift bits for interrupt clear fall 0 > * @emul_con: TMU emulation controller register. > * @emul_temp_shift: shift bits of emulation temperature. > * @emul_time_shift: shift bits of emulation time. > @@ -204,6 +205,7 @@ struct exynos_tmu_registers { > u32 tmu_intstat; > > u32 tmu_intclear; > + u32 intclr_fall_shift; > > u32 emul_con; > u32 emul_temp_shift; > diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c > index 9002499..23fea23 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.c > +++ b/drivers/thermal/samsung/exynos_tmu_data.c > @@ -122,6 +122,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = { > .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, > .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, > .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, > + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, > .emul_con = EXYNOS_EMUL_CON, > .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, > .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, > @@ -210,6 +211,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { > .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, > .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, > .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, > + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, > .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, > .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, > .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, > diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h > index dc7feb5..8788a87 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.h > +++ b/drivers/thermal/samsung/exynos_tmu_data.h > @@ -69,9 +69,10 @@ > #define EXYNOS_TMU_RISE_INT_MASK 0x111 > #define EXYNOS_TMU_RISE_INT_SHIFT 0 > #define EXYNOS_TMU_FALL_INT_MASK 0x111 > -#define EXYNOS_TMU_FALL_INT_SHIFT 12 > +#define EXYNOS_TMU_FALL_INT_SHIFT 16 > #define EXYNOS_TMU_CLEAR_RISE_INT 0x111 > #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) > +#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12 > #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 > #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 > #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index ec01dfe..d201ed8 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -265,7 +265,7 @@ skip_calib_data: data->base + reg->threshold_th1); writel((reg->inten_rise_mask << reg->inten_rise_shift) | - (reg->inten_fall_mask << reg->inten_fall_shift), + (reg->inten_fall_mask << reg->intclr_fall_shift), data->base + reg->tmu_intclear); /* if last threshold limit is also present */ diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index b364c9e..7c6c34a 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -134,6 +134,7 @@ enum soc_type { * @inten_fall3_shift: shift bits of falling 3 interrupt bits. * @tmu_intstat: Register containing the interrupt status values. * @tmu_intclear: Register for clearing the raised interrupt status. + * @intclr_fall_shift: shift bits for interrupt clear fall 0 * @emul_con: TMU emulation controller register. * @emul_temp_shift: shift bits of emulation temperature. * @emul_time_shift: shift bits of emulation time. @@ -204,6 +205,7 @@ struct exynos_tmu_registers { u32 tmu_intstat; u32 tmu_intclear; + u32 intclr_fall_shift; u32 emul_con; u32 emul_temp_shift; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index 9002499..23fea23 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -122,6 +122,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, @@ -210,6 +211,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index dc7feb5..8788a87 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -69,9 +69,10 @@ #define EXYNOS_TMU_RISE_INT_MASK 0x111 #define EXYNOS_TMU_RISE_INT_SHIFT 0 #define EXYNOS_TMU_FALL_INT_MASK 0x111 -#define EXYNOS_TMU_FALL_INT_SHIFT 12 +#define EXYNOS_TMU_FALL_INT_SHIFT 16 #define EXYNOS_TMU_CLEAR_RISE_INT 0x111 #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) +#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
The FALL interrupt related en, status bits are available at an offset of 16 on INTEN, INTSTAT registers and at an offset of 12 on INTCLEAR register. This patch corrects the same for exyns5250 and exynos5440 Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> --- drivers/thermal/samsung/exynos_tmu.c | 2 +- drivers/thermal/samsung/exynos_tmu.h | 2 ++ drivers/thermal/samsung/exynos_tmu_data.c | 2 ++ drivers/thermal/samsung/exynos_tmu_data.h | 3 ++- 4 files changed, 7 insertions(+), 2 deletions(-)