| Message ID | 1380652344-18819-2-git-send-email-eduardo.valentin@ti.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Eduardo Valentin |
| Headers | show |
On 14:32-20131001, Eduardo Valentin wrote: > This patch changes a dtsi file to contain the thermal data ^^ introduces? > for DSPEVE domain on DRA7 and later SoCs. This data will > enable a thermal shutdown at 125C. > > This thermal data can be reused across TI SoC devices. > > Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> > --- > arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi > > diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi > new file mode 100644 > index 0000000..f8b9051 > --- /dev/null > +++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi > @@ -0,0 +1,28 @@ > +/* > + * Device Tree Source for DRA7 SoC DSPEVE thermal > + * > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ > + * Contact: Eduardo Valentin <eduardo.valentin@ti.com> > + * > + * This file is licensed under the terms of the GNU General Public License > + * version 2. This program is licensed "as is" without any warranty of any > + * kind, whether express or implied. > + */ > + > +#include <dt-bindings/thermal/thermal.h> > + > +dspeve_thermal: dspeve_thermal { > + polling-delay-passive = <250>; /* milliseconds */ > + polling-delay = <1000>; /* milliseconds */ > + > + /* sensor ID */ ^^ > + thermal-sensors = <&bandgap 3>; ^^ tab control a bit? ;) > + > + trips { > + dspeve_crit: dspeve_crit { > + temperature = <125000>; /* milliCelsius */ > + hysteresis = <2000>; /* milliCelsius */ > + type = THERMAL_TRIP_CRITICAL; > + }; > + }; > +};
On 01-10-2013 18:37, Nishanth Menon wrote: > On 14:32-20131001, Eduardo Valentin wrote: >> This patch changes a dtsi file to contain the thermal data > ^^ introduces? >> for DSPEVE domain on DRA7 and later SoCs. This data will >> enable a thermal shutdown at 125C. >> >> This thermal data can be reused across TI SoC devices. >> >> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> >> --- >> arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 28 ++++++++++++++++++++++++++++ >> 1 file changed, 28 insertions(+) >> create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi >> >> diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi >> new file mode 100644 >> index 0000000..f8b9051 >> --- /dev/null >> +++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi >> @@ -0,0 +1,28 @@ >> +/* >> + * Device Tree Source for DRA7 SoC DSPEVE thermal >> + * >> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ >> + * Contact: Eduardo Valentin <eduardo.valentin@ti.com> >> + * >> + * This file is licensed under the terms of the GNU General Public License >> + * version 2. This program is licensed "as is" without any warranty of any >> + * kind, whether express or implied. >> + */ >> + >> +#include <dt-bindings/thermal/thermal.h> >> + >> +dspeve_thermal: dspeve_thermal { >> + polling-delay-passive = <250>; /* milliseconds */ >> + polling-delay = <1000>; /* milliseconds */ >> + >> + /* sensor ID */ > ^^ >> + thermal-sensors = <&bandgap 3>; > ^^ tab control a bit? ;) check answer on IVA patch. >> + >> + trips { >> + dspeve_crit: dspeve_crit { >> + temperature = <125000>; /* milliCelsius */ >> + hysteresis = <2000>; /* milliCelsius */ >> + type = THERMAL_TRIP_CRITICAL; >> + }; >> + }; >> +}; >
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi new file mode 100644 index 0000000..f8b9051 --- /dev/null +++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi @@ -0,0 +1,28 @@ +/* + * Device Tree Source for DRA7 SoC DSPEVE thermal + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Contact: Eduardo Valentin <eduardo.valentin@ti.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +dspeve_thermal: dspeve_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 3>; + + trips { + dspeve_crit: dspeve_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = THERMAL_TRIP_CRITICAL; + }; + }; +};
This patch changes a dtsi file to contain the thermal data for DSPEVE domain on DRA7 and later SoCs. This data will enable a thermal shutdown at 125C. This thermal data can be reused across TI SoC devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> --- arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi