@@ -6,6 +6,7 @@
"samsung,exynos4412-tmu"
"samsung,exynos4210-tmu"
"samsung,exynos5250-tmu"
+ "samsung,exynos5420-tmu"
"samsung,exynos5440-tmu"
- interrupt-parent : The phandle for the interrupt controller
- reg : Address range of the thermal registers. For soc's which has multiple
@@ -13,6 +14,16 @@
interrupt related then 2 set of register has to supplied. First set
belongs to each instance of TMU and second set belongs to second set
of common TMU registers.
+ NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU
+ channels 2, 3 and 4
+
+ TRIMINFO at 0x1006c000 contains data for TMU channel 3
+ TRIMINFO at 0x100a0000 contains data for TMU channel 4
+ TRIMINFO at 0x10068000 contains data for TMU channel 2
+
+ The misplaced register address is passed through devicetree as the
+ second base
+
- interrupts : Should contain interrupt for thermal system
- clocks : The main clock for TMU device
- clock-names : Thermal system clock name
@@ -43,6 +54,34 @@ Example 2):
clock-names = "tmu_apbif";
};
+Example 3): (In case of Exynos5420)
+ /* tmu for CPU2 */
+ tmu@10068000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+ interrupts = <0 184 0>;
+ clocks = <&clock 318>;
+ clock-names = "tmu_apbif";
+ };
+
+ /* tmu for CPU3 */
+ tmu@1006c000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+ interrupts = <0 185 0>;
+ clocks = <&clock 318>;
+ clock-names = "tmu_apbif";
+ };
+
+ /* tmu for GPU */
+ tmu@100a0000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+ interrupts = <0 215 0>;
+ clocks = <&clock 318>;
+ clock-names = "tmu_apbif";
+ };
+
Note: For multi-instance tmu each instance should have an alias correctly
numbered in "aliases" node.
@@ -186,7 +186,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
}
} else {
- trim_info = readl(data->base + reg->triminfo_data);
+ /* On exynos5420 the triminfo register is in the shared space */
+ if (data->base_second && (data->soc == SOC_ARCH_EXYNOS5420))
+ trim_info = readl(data->base_second +
+ reg->triminfo_data);
+ else
+ trim_info = readl(data->base + reg->triminfo_data);
}
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
@@ -498,6 +503,10 @@ static const struct of_device_id exynos_tmu_match[] = {
.data = (void *)EXYNOS5250_TMU_DRV_DATA,
},
{
+ .compatible = "samsung,exynos5420-tmu",
+ .data = (void *)EXYNOS5420_TMU_DRV_DATA,
+ },
+ {
.compatible = "samsung,exynos5440-tmu",
.data = (void *)EXYNOS5440_TMU_DRV_DATA,
},
@@ -635,6 +644,7 @@ static int exynos_tmu_probe(struct platform_device *pdev)
if (pdata->type == SOC_ARCH_EXYNOS4210 ||
pdata->type == SOC_ARCH_EXYNOS4412 ||
pdata->type == SOC_ARCH_EXYNOS5250 ||
+ pdata->type == SOC_ARCH_EXYNOS5420 ||
pdata->type == SOC_ARCH_EXYNOS5440)
data->soc = pdata->type;
else {
@@ -43,6 +43,7 @@ enum soc_type {
SOC_ARCH_EXYNOS4210 = 1,
SOC_ARCH_EXYNOS4412,
SOC_ARCH_EXYNOS5250,
+ SOC_ARCH_EXYNOS5420,
SOC_ARCH_EXYNOS5440,
};
@@ -195,6 +195,105 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
};
#endif
+#if defined(CONFIG_SOC_EXYNOS5420)
+static const struct exynos_tmu_registers exynos5420_tmu_registers = {
+ .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
+ .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+ .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+ .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
+ .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+ .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+ .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+ .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+ .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+ .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+ .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+ .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+ .tmu_status = EXYNOS_TMU_REG_STATUS,
+ .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
+ .threshold_th0 = EXYNOS_THD_TEMP_RISE,
+ .threshold_th1 = EXYNOS_THD_TEMP_FALL,
+ .tmu_inten = EXYNOS_TMU_REG_INTEN,
+ .inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
+ .inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+ .inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
+ .inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
+ .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
+ .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
+ .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
+ /* INTEN_RISE3 Not availble in exynos5420 */
+ .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
+ .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
+ .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
+ .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+ .intclr_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
+ .emul_con = EXYNOS_EMUL_CON,
+ .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+ .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
+ .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
+};
+
+#define __EXYNOS5420_TMU_DATA \
+ .threshold_falling = 10, \
+ .trigger_levels[0] = 85, \
+ .trigger_levels[1] = 103, \
+ .trigger_levels[2] = 110, \
+ .trigger_levels[3] = 120, \
+ .trigger_enable[0] = true, \
+ .trigger_enable[1] = true, \
+ .trigger_enable[2] = true, \
+ .trigger_enable[3] = false, \
+ .trigger_type[0] = THROTTLE_ACTIVE, \
+ .trigger_type[1] = THROTTLE_ACTIVE, \
+ .trigger_type[2] = SW_TRIP, \
+ .trigger_type[3] = HW_TRIP, \
+ .max_trigger_level = 4, \
+ .gain = 8, \
+ .reference_voltage = 16, \
+ .noise_cancel_mode = 4, \
+ .cal_type = TYPE_ONE_POINT_TRIMMING, \
+ .efuse_value = 55, \
+ .min_efuse_value = 40, \
+ .max_efuse_value = 100, \
+ .first_point_trim = 25, \
+ .second_point_trim = 85, \
+ .default_temp_offset = 50, \
+ .freq_tab[0] = { \
+ .freq_clip_max = 800 * 1000, \
+ .temp_level = 85, \
+ }, \
+ .freq_tab[1] = { \
+ .freq_clip_max = 200 * 1000, \
+ .temp_level = 103, \
+ }, \
+ .freq_tab_count = 2, \
+ .type = SOC_ARCH_EXYNOS5420, \
+ .registers = &exynos5420_tmu_registers, \
+
+#define EXYNOS5420_TMU_DATA \
+ __EXYNOS5420_TMU_DATA \
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+ TMU_SUPPORT_EMUL_TIME)
+
+#define EXYNOS5420_TMU_DATA_SHARED \
+ __EXYNOS5420_TMU_DATA \
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+ TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE)
+
+struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
+ .tmu_data = {
+ { EXYNOS5420_TMU_DATA },
+ { EXYNOS5420_TMU_DATA },
+ { EXYNOS5420_TMU_DATA_SHARED },
+ { EXYNOS5420_TMU_DATA_SHARED },
+ { EXYNOS5420_TMU_DATA_SHARED },
+ },
+ .tmu_count = 5,
+};
+#endif
+
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
@@ -158,6 +158,13 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
#define EXYNOS5250_TMU_DRV_DATA (NULL)
#endif
+#if defined(CONFIG_SOC_EXYNOS5420)
+extern struct exynos_tmu_init_data const exynos5420_default_tmu_data;
+#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data)
+#else
+#define EXYNOS5420_TMU_DRV_DATA (NULL)
+#endif
+
#if defined(CONFIG_SOC_EXYNOS5440)
extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
This patch adds the neccessary register changes and arch information to support Exynos5420 SoCs Exynos5420 has 5 TMU channels one for each CPU 0, 1, 2 and 3 and GPU Also updated the Documentation at Documentation/devicetree/bindings/thermal/exynos-thermal.txt Note: The platform data structure will be handled properly once the driver moves to complete device driver solution. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> --- Changes since v1: 1. modified the platform data structure in order to pass SHARED flag for channels that need sharing of address space. 2. https://lkml.org/lkml/2013/8/1/38 is merged into this patch. As the changes are minimum and can be added here. Changes since v3: a. Rearraged the code alphabetically, make exynso5420 come before exynso5440 b. Reduce code duplication in passing platform data by introducing a common macro Bartlomiej Zolnierkiewicz Thanks for review and suggestions Changes since v4i None .../devicetree/bindings/thermal/exynos-thermal.txt | 39 ++++++++ drivers/thermal/samsung/exynos_tmu.c | 12 ++- drivers/thermal/samsung/exynos_tmu.h | 1 + drivers/thermal/samsung/exynos_tmu_data.c | 99 ++++++++++++++++++++ drivers/thermal/samsung/exynos_tmu_data.h | 7 ++ 5 files changed, 157 insertions(+), 1 deletion(-)