diff mbox

[1/4,v10] thermal: samsung: replace inten_ bit fields with intclr_

Message ID 1384866259-15983-1-git-send-email-ch.naveen@samsung.com (mailing list archive)
State Superseded, archived
Delegated to: Zhang Rui
Headers show

Commit Message

Naveen Krishna Chatradhi Nov. 19, 2013, 1:04 p.m. UTC 
This patch replaces the inten_rise_shift/mask and inten_fall_shift/mask
with intclr_rise_shift/mask and intclr_fall_shift/mask respectively.
Currently, inten_rise_shift/mask and inten_fall_shift/mask bits are only used
to configure intclr related registers.

Description of H/W:
The offset for the bits in the CLEAR register are not consistent across TMU
modules in Exynso5250, 5420 and 5440.

On Exynos5250, the FALL interrupt related en, status and clear bits are
available at an offset of
16 in INTEN, INTSTAT registers and at an offset of
12 in INTCLEAR register.

On Exynos5420, the FALL interrupt related en, status and clear bits are
available at an offset of
16 in INTEN, INTSTAT and INTCLEAR registers.

On Exynos5440,
the FALL_IRQEN bits are at an offset of 4
and the RISE_IRQEN bits are at an offset of 0

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
Changes since v9:
Just respinning

Changes since v8:
1. Modified the patch description,
2. replaces the inten_rise/fall_shift/mask with intclr_rise/fall_shift/mask

 drivers/thermal/samsung/exynos_tmu.c      |    6 +++---
 drivers/thermal/samsung/exynos_tmu.h      |   16 ++++++++--------
 drivers/thermal/samsung/exynos_tmu_data.c |   18 +++++++++---------
 drivers/thermal/samsung/exynos_tmu_data.h |    4 ++--
 4 files changed, 22 insertions(+), 22 deletions(-)

Comments

Tomasz Figa Dec. 9, 2013, 12:51 p.m. UTC | #1 
Hi Naveen,

On Tuesday 19 of November 2013 18:34:19 Naveen Krishna Chatradhi wrote:
> This patch replaces the inten_rise_shift/mask and inten_fall_shift/mask
> with intclr_rise_shift/mask and intclr_fall_shift/mask respectively.
> Currently, inten_rise_shift/mask and inten_fall_shift/mask bits are only used
> to configure intclr related registers.
> 
> Description of H/W:
> The offset for the bits in the CLEAR register are not consistent across TMU
> modules in Exynso5250, 5420 and 5440.
> 
> On Exynos5250, the FALL interrupt related en, status and clear bits are
> available at an offset of
> 16 in INTEN, INTSTAT registers and at an offset of
> 12 in INTCLEAR register.
> 
> On Exynos5420, the FALL interrupt related en, status and clear bits are
> available at an offset of
> 16 in INTEN, INTSTAT and INTCLEAR registers.
> 
> On Exynos5440,
> the FALL_IRQEN bits are at an offset of 4
> and the RISE_IRQEN bits are at an offset of 0
> 
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
> Changes since v9:
> Just respinning
> 
> Changes since v8:
> 1. Modified the patch description,
> 2. replaces the inten_rise/fall_shift/mask with intclr_rise/fall_shift/mask
> 
>  drivers/thermal/samsung/exynos_tmu.c      |    6 +++---
>  drivers/thermal/samsung/exynos_tmu.h      |   16 ++++++++--------
>  drivers/thermal/samsung/exynos_tmu_data.c |   18 +++++++++---------
>  drivers/thermal/samsung/exynos_tmu_data.h |    4 ++--
>  4 files changed, 22 insertions(+), 22 deletions(-)

Reviewed-by: Tomasz Figa <t.figa@samsung.com>

Best regards,
Tomasz

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 32f38b9..c493245 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -237,7 +237,7 @@  skip_calib_data:
 			writeb(pdata->trigger_levels[i], data->base +
 			reg->threshold_th0 + i * sizeof(reg->threshold_th0));
 
-		writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
+		writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
 	} else {
 		/* Write temperature code for rising and falling threshold */
 		for (i = 0;
@@ -264,8 +264,8 @@  skip_calib_data:
 		writel(falling_threshold,
 				data->base + reg->threshold_th1);
 
-		writel((reg->inten_rise_mask << reg->inten_rise_shift) |
-			(reg->inten_fall_mask << reg->inten_fall_shift),
+		writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
+			(reg->intclr_fall_mask << reg->intclr_fall_shift),
 				data->base + reg->tmu_intclear);
 
 		/* if last threshold limit is also present */
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 3fb6554..980859a 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -122,10 +122,6 @@  enum soc_type {
  * @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
  * @tmu_inten: register containing the different threshold interrupt
 	enable bits.
- * @inten_rise_shift: shift bits of all rising interrupt bits.
- * @inten_rise_mask: mask bits of all rising interrupt bits.
- * @inten_fall_shift: shift bits of all rising interrupt bits.
- * @inten_fall_mask: mask bits of all rising interrupt bits.
  * @inten_rise0_shift: shift bits of rising 0 interrupt bits.
  * @inten_rise1_shift: shift bits of rising 1 interrupt bits.
  * @inten_rise2_shift: shift bits of rising 2 interrupt bits.
@@ -136,6 +132,10 @@  enum soc_type {
  * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
  * @tmu_intstat: Register containing the interrupt status values.
  * @tmu_intclear: Register for clearing the raised interrupt status.
+ * @intclr_fall_shift: shift bits for interrupt clear fall 0
+ * @intclr_rise_shift: shift bits of all rising interrupt bits.
+ * @intclr_rise_mask: mask bits of all rising interrupt bits.
+ * @intclr_fall_mask: mask bits of all rising interrupt bits.
  * @emul_con: TMU emulation controller register.
  * @emul_temp_shift: shift bits of emulation temperature.
  * @emul_time_shift: shift bits of emulation time.
@@ -191,10 +191,6 @@  struct exynos_tmu_registers {
 	u32	threshold_th3_l0_shift;
 
 	u32	tmu_inten;
-	u32	inten_rise_shift;
-	u32	inten_rise_mask;
-	u32	inten_fall_shift;
-	u32	inten_fall_mask;
 	u32	inten_rise0_shift;
 	u32	inten_rise1_shift;
 	u32	inten_rise2_shift;
@@ -207,6 +203,10 @@  struct exynos_tmu_registers {
 	u32	tmu_intstat;
 
 	u32	tmu_intclear;
+	u32	intclr_fall_shift;
+	u32	intclr_rise_shift;
+	u32	intclr_fall_mask;
+	u32	intclr_rise_mask;
 
 	u32	emul_con;
 	u32	emul_temp_shift;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 073c292..7cdb04e 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -40,13 +40,13 @@  static const struct exynos_tmu_registers exynos4210_tmu_registers = {
 	.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
 	.threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
 	.tmu_inten = EXYNOS_TMU_REG_INTEN,
-	.inten_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
 	.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
 	.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
 	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
 	.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
 	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
 	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+	.intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
 };
 
 struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
@@ -112,10 +112,6 @@  static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 	.threshold_th0 = EXYNOS_THD_TEMP_RISE,
 	.threshold_th1 = EXYNOS_THD_TEMP_FALL,
 	.tmu_inten = EXYNOS_TMU_REG_INTEN,
-	.inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
-	.inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
-	.inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
-	.inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
 	.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
 	.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
 	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
@@ -123,6 +119,10 @@  static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 	.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
 	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
 	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+	.intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
+	.intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+	.intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
+	.intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
 	.emul_con = EXYNOS_EMUL_CON,
 	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
 	.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
@@ -217,10 +217,6 @@  static const struct exynos_tmu_registers exynos5440_tmu_registers = {
 	.threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
 	.threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
 	.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
-	.inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
-	.inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
-	.inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
-	.inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
 	.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
 	.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
 	.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
@@ -228,6 +224,10 @@  static const struct exynos_tmu_registers exynos5440_tmu_registers = {
 	.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
 	.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
 	.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
+	.intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
+	.intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
+	.intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
+	.intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
 	.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
 	.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
 	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index a1ea19d..d9495a4 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -69,9 +69,10 @@ 
 #define EXYNOS_TMU_RISE_INT_MASK	0x111
 #define EXYNOS_TMU_RISE_INT_SHIFT	0
 #define EXYNOS_TMU_FALL_INT_MASK	0x111
-#define EXYNOS_TMU_FALL_INT_SHIFT	12
 #define EXYNOS_TMU_CLEAR_RISE_INT	0x111
 #define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 12)
+#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT	12
+#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT	4
 #define EXYNOS_TMU_TRIP_MODE_SHIFT	13
 #define EXYNOS_TMU_TRIP_MODE_MASK	0x7
 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT	12
@@ -119,7 +120,6 @@ 
 #define EXYNOS5440_TMU_RISE_INT_MASK		0xf
 #define EXYNOS5440_TMU_RISE_INT_SHIFT		0
 #define EXYNOS5440_TMU_FALL_INT_MASK		0xf
-#define EXYNOS5440_TMU_FALL_INT_SHIFT		4
 #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT	0
 #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT	1
 #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT	2