| Message ID | 1384866325-16110-1-git-send-email-ch.naveen@samsung.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Zhang Rui |
| Headers | show |
Hello All, On 19 November 2013 18:35, Naveen Krishna Chatradhi <ch.naveen@samsung.com> wrote: > Exynos5420 has 5 TMU channels, the TRIMINFO register is > misplaced for TMU channels 2, 3 and 4 > TRIMINFO at 0x1006c000 contains data for TMU channel 3 > TRIMINFO at 0x100a0000 contains data for TMU channel 4 > TRIMINFO at 0x10068000 contains data for TMU channel 2 > > This patch > 1 Adds the neccessary register changes and arch information > to support Exynos5420 SoCs. > 2. Handles the gate clock for misplaced TRIMINFO register > 3. Updates the Documentation at > Documentation/devicetree/bindings/thermal/exynos-thermal.txt > > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> > Signed-off-by: Andrew Bresticker <abrestic@chromium.org> > Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > --- > Changes since v9: > Just respinning > > Changes since v8: > 1. rewrote the Documentation for device tree bindings > 2. Merged the https://lkml.org/lkml/2013/11/7/262 (as this is a fix) > 3. introduces "samsung,exynos5420-tmu-triminfo" and > "samsung,exynos5420-tmu-triminfo-clk" to handle the TMU channels on > Exynos5420 more appropriately > > .../devicetree/bindings/thermal/exynos-thermal.txt | 45 +++++++++ > drivers/thermal/samsung/exynos_tmu.c | 58 ++++++++++- > drivers/thermal/samsung/exynos_tmu.h | 2 + > drivers/thermal/samsung/exynos_tmu_data.c | 106 ++++++++++++++++++++ > drivers/thermal/samsung/exynos_tmu_data.h | 8 ++ > 5 files changed, 215 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > index 116cca0..5055b31 100644 > --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > @@ -6,6 +6,11 @@ > "samsung,exynos4412-tmu" > "samsung,exynos4210-tmu" > "samsung,exynos5250-tmu" > + "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420 > + "samsung,exynos5420-tmu-triminfo" for TMU channel 2 Exynos5420 > + (Must pass triminfo base) > + "samsung,exynos5420-tmu-triminfo-clk" for TMU channel 3 and 4 > + Exynos5420 (Must pass triminfo base and triminfo clock) > "samsung,exynos5440-tmu" > - interrupt-parent : The phandle for the interrupt controller > - reg : Address range of the thermal registers. For soc's which has multiple > @@ -13,6 +18,18 @@ > interrupt related then 2 set of register has to supplied. First set > belongs to each instance of TMU and second set belongs to second set > of common TMU registers. > + > + NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU > + channels 2, 3 and 4 > + Use "samsung,exynos5420-tmu-triminfo" in cases, there is a misplaced > + register but no need of another clock to access that base. > + Use "samsung,exynos5420-tmu-triminfo-clk" in cases where there is a misplaced > + register and we need another clock to access that base. > + > + TRIMINFO at 0x1006c000 contains data for TMU channel 3 > + TRIMINFO at 0x100a0000 contains data for TMU channel 4 > + TRIMINFO at 0x10068000 contains data for TMU channel 2 > + > - interrupts : Should contain interrupt for thermal system > - clocks : The main clock for TMU device > - clock-names : Thermal system clock name > @@ -43,6 +60,34 @@ Example 2): > clock-names = "tmu_apbif"; > }; > > +Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") > + /* tmu for CPU2 */ > + tmu@10068000 { > + compatible = "samsung,exynos5420-tmu-triminfo"; > + reg = <0x10068000 0x100>, <0x1006c000 0x4>; > + interrupts = <0 184 0>; > + clocks = <&clock 318>; > + clock-names = "tmu_apbif"; > + }; > + > + /* tmu for CPU3 */ > + tmu@1006c000 { > + compatible = "samsung,exynos5420-tmu-triminfo-clk"; > + reg = <0x1006c000 0x100>, <0x100a0000 0x4>; > + interrupts = <0 185 0>; > + clocks = <&clock 318>; > + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; > + }; > + > + /* tmu for GPU */ > + tmu@100a0000 { > + compatible = "samsung,exynos5420-tmu-triminfo-clk"; > + reg = <0x100a0000 0x100>, <0x10068000 0x4>; > + interrupts = <0 215 0>; > + clocks = <&clock 318>; > + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; > + }; > + > Note: For multi-instance tmu each instance should have an alias correctly > numbered in "aliases" node. > > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index bbd0fc3..826647c 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -47,6 +47,7 @@ > * @irq_work: pointer to the irq work structure. > * @lock: lock to implement synchronization. > * @clk: pointer to the clock structure. > + * @clk_sec: pointer to the clock structure for accessing the base_second. > * @temp_error1: fused value of the first point trim. > * @temp_error2: fused value of the second point trim. > * @regulator: pointer to the TMU regulator structure. > @@ -61,7 +62,7 @@ struct exynos_tmu_data { > enum soc_type soc; > struct work_struct irq_work; > struct mutex lock; > - struct clk *clk; > + struct clk *clk, *clk_sec; > u8 temp_error1, temp_error2; > struct regulator *regulator; > struct thermal_sensor_conf *reg_conf; > @@ -152,6 +153,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev) > > mutex_lock(&data->lock); > clk_enable(data->clk); > + if (!IS_ERR(data->clk_sec)) > + clk_enable(data->clk_sec); > > if (TMU_SUPPORTS(pdata, READY_STATUS)) { > status = readb(data->base + reg->tmu_status); > @@ -186,7 +189,13 @@ static int exynos_tmu_initialize(struct platform_device *pdev) > EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); > } > } else { > - trim_info = readl(data->base + reg->triminfo_data); > + /* On exynos5420 the triminfo register is in the shared space */ > + if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO || > + data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO_CLK) > + trim_info = readl(data->base_second + > + reg->triminfo_data); > + else > + trim_info = readl(data->base + reg->triminfo_data); > } > data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; > data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & > @@ -301,6 +310,8 @@ skip_calib_data: > out: > clk_disable(data->clk); > mutex_unlock(&data->lock); > + if (!IS_ERR(data->clk_sec)) > + clk_disable(data->clk_sec); > > return ret; > } > @@ -452,12 +463,16 @@ static void exynos_tmu_work(struct work_struct *work) > const struct exynos_tmu_registers *reg = pdata->registers; > unsigned int val_irq, val_type; > > + if (!IS_ERR(data->clk_sec)) > + clk_enable(data->clk_sec); > /* Find which sensor generated this interrupt */ > if (reg->tmu_irqstatus) { > val_type = readl(data->base_second + reg->tmu_irqstatus); > if (!((val_type >> data->id) & 0x1)) > goto out; > } > + if (!IS_ERR(data->clk_sec)) > + clk_disable(data->clk_sec); > > exynos_report_trigger(data->reg_conf); > mutex_lock(&data->lock); > @@ -498,6 +513,18 @@ static const struct of_device_id exynos_tmu_match[] = { > .data = (void *)EXYNOS5250_TMU_DRV_DATA, > }, > { > + .compatible = "samsung,exynos5420-tmu", > + .data = (void *)EXYNOS5420_TMU_DRV_DATA, > + }, > + { > + .compatible = "samsung,exynos5420-tmu-triminfo", > + .data = (void *)EXYNOS5420_TMU_DRV_DATA, > + }, > + { > + .compatible = "samsung,exynos5420-tmu-triminfo-clk", > + .data = (void *)EXYNOS5420_TMU_DRV_DATA, > + }, > + { > .compatible = "samsung,exynos5440-tmu", > .data = (void *)EXYNOS5440_TMU_DRV_DATA, > }, > @@ -628,13 +655,31 @@ static int exynos_tmu_probe(struct platform_device *pdev) > return PTR_ERR(data->clk); > } > > + data->clk_sec = devm_clk_get(&pdev->dev, "tmu_apbif_triminfo"); > + if (IS_ERR(data->clk_sec)) { > + if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO_CLK) { > + dev_err(&pdev->dev, "Failed to get triminfo clock\n"); > + return PTR_ERR(data->clk_sec); > + } > + } else { > + ret = clk_prepare(data->clk_sec); > + if (ret) { > + dev_err(&pdev->dev, "Failed to get clock\n"); > + return ret; > + } > + } > + > ret = clk_prepare(data->clk); > - if (ret) > - return ret; > + if (ret) { > + dev_err(&pdev->dev, "Failed to get clock\n"); > + goto err_clk_sec; > + } > > if (pdata->type == SOC_ARCH_EXYNOS4210 || > pdata->type == SOC_ARCH_EXYNOS4412 || > pdata->type == SOC_ARCH_EXYNOS5250 || > + pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO || > + pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO_CLK || > pdata->type == SOC_ARCH_EXYNOS5440) > data->soc = pdata->type; > else { > @@ -703,6 +748,9 @@ static int exynos_tmu_probe(struct platform_device *pdev) > return 0; > err_clk: > clk_unprepare(data->clk); > +err_clk_sec: > + if (!IS_ERR(data->clk_sec)) > + clk_unprepare(data->clk_sec); > return ret; > } > > @@ -715,6 +763,8 @@ static int exynos_tmu_remove(struct platform_device *pdev) > exynos_unregister_thermal(data->reg_conf); > > clk_unprepare(data->clk); > + if (!IS_ERR(data->clk_sec)) > + clk_unprepare(data->clk_sec); > > if (!IS_ERR(data->regulator)) > regulator_disable(data->regulator); > diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h > index 0d6b32f..f2eb3ac 100644 > --- a/drivers/thermal/samsung/exynos_tmu.h > +++ b/drivers/thermal/samsung/exynos_tmu.h > @@ -43,6 +43,8 @@ enum soc_type { > SOC_ARCH_EXYNOS4210 = 1, > SOC_ARCH_EXYNOS4412, > SOC_ARCH_EXYNOS5250, > + SOC_ARCH_EXYNOS5420_TRIMINFO, > + SOC_ARCH_EXYNOS5420_TRIMINFO_CLK, > SOC_ARCH_EXYNOS5440, > }; > > diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c > index 1d27069..ff79c9a 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.c > +++ b/drivers/thermal/samsung/exynos_tmu_data.c > @@ -194,6 +194,112 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { > }; > #endif > > +#if defined(CONFIG_SOC_EXYNOS5420) > +static const struct exynos_tmu_registers exynos5420_tmu_registers = { > + .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, > + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, > + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, > + .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, > + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, > + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, > + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, > + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, > + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, > + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, > + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, > + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, > + .tmu_status = EXYNOS_TMU_REG_STATUS, > + .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, > + .threshold_th0 = EXYNOS_THD_TEMP_RISE, > + .threshold_th1 = EXYNOS_THD_TEMP_FALL, > + .tmu_inten = EXYNOS_TMU_REG_INTEN, > + .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, > + .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, > + .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, > + /* INTEN_RISE3 Not availble in exynos5420 */ > + .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, > + .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, > + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, > + .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, > + .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT, > + .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, > + .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, > + .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, > + .emul_con = EXYNOS_EMUL_CON, > + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, > + .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, > + .emul_time_mask = EXYNOS_EMUL_TIME_MASK, > +}; > + > +#define __EXYNOS5420_TMU_DATA \ > + .threshold_falling = 10, \ > + .trigger_levels[0] = 85, \ > + .trigger_levels[1] = 103, \ > + .trigger_levels[2] = 110, \ > + .trigger_levels[3] = 120, \ > + .trigger_enable[0] = true, \ > + .trigger_enable[1] = true, \ > + .trigger_enable[2] = true, \ > + .trigger_enable[3] = false, \ > + .trigger_type[0] = THROTTLE_ACTIVE, \ > + .trigger_type[1] = THROTTLE_ACTIVE, \ > + .trigger_type[2] = SW_TRIP, \ > + .trigger_type[3] = HW_TRIP, \ > + .max_trigger_level = 4, \ > + .gain = 8, \ > + .reference_voltage = 16, \ > + .noise_cancel_mode = 4, \ > + .cal_type = TYPE_ONE_POINT_TRIMMING, \ > + .efuse_value = 55, \ > + .min_efuse_value = 40, \ > + .max_efuse_value = 100, \ > + .first_point_trim = 25, \ > + .second_point_trim = 85, \ > + .default_temp_offset = 50, \ > + .freq_tab[0] = { \ > + .freq_clip_max = 800 * 1000, \ > + .temp_level = 85, \ > + }, \ > + .freq_tab[1] = { \ > + .freq_clip_max = 200 * 1000, \ > + .temp_level = 103, \ > + }, \ > + .freq_tab_count = 2, \ > + .registers = &exynos5420_tmu_registers, \ > + > +#define EXYNOS5420_TMU_DATA \ > + __EXYNOS5420_TMU_DATA \ > + .type = SOC_ARCH_EXYNOS5250, \ > + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ > + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ > + TMU_SUPPORT_EMUL_TIME) > + > +#define EXYNOS5420_TMU_DATA_SHARED \ > + __EXYNOS5420_TMU_DATA \ > + .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \ > + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ > + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ > + TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) > + > +#define EXYNOS5420_TMU_DATA_SHARED_CLK \ > + __EXYNOS5420_TMU_DATA \ > + .type = SOC_ARCH_EXYNOS5420_TRIMINFO_CLK, \ > + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ > + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ > + TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) > + > +struct exynos_tmu_init_data const exynos5420_default_tmu_data = { > + .tmu_data = { > + { EXYNOS5420_TMU_DATA }, > + { EXYNOS5420_TMU_DATA }, > + { EXYNOS5420_TMU_DATA_SHARED }, > + { EXYNOS5420_TMU_DATA_SHARED_CLK }, > + { EXYNOS5420_TMU_DATA_SHARED_CLK }, > + }, > + .tmu_count = 5, > +}; > +#endif > + > #if defined(CONFIG_SOC_EXYNOS5440) > static const struct exynos_tmu_registers exynos5440_tmu_registers = { > .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, > diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h > index d9495a4..41f06dc 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.h > +++ b/drivers/thermal/samsung/exynos_tmu_data.h > @@ -72,6 +72,7 @@ > #define EXYNOS_TMU_CLEAR_RISE_INT 0x111 > #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) > #define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12 > +#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16 > #define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4 > #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 > #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 > @@ -156,6 +157,13 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; > #define EXYNOS5250_TMU_DRV_DATA (NULL) > #endif > > +#if defined(CONFIG_SOC_EXYNOS5420) > +extern struct exynos_tmu_init_data const exynos5420_default_tmu_data; > +#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data) > +#else > +#define EXYNOS5420_TMU_DRV_DATA (NULL) > +#endif > + > #if defined(CONFIG_SOC_EXYNOS5440) > extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; > #define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data) > -- > 1.7.10.4 > Any update on this patch set, its been Acked by Amit and Reviewed-by Bartlomiej Zolnierkiewicz
Hi Naveen, On Tuesday 19 of November 2013 18:35:25 Naveen Krishna Chatradhi wrote: > Exynos5420 has 5 TMU channels, the TRIMINFO register is > misplaced for TMU channels 2, 3 and 4 > TRIMINFO at 0x1006c000 contains data for TMU channel 3 > TRIMINFO at 0x100a0000 contains data for TMU channel 4 > TRIMINFO at 0x10068000 contains data for TMU channel 2 > > This patch > 1 Adds the neccessary register changes and arch information > to support Exynos5420 SoCs. > 2. Handles the gate clock for misplaced TRIMINFO register > 3. Updates the Documentation at > Documentation/devicetree/bindings/thermal/exynos-thermal.txt > > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> > Signed-off-by: Andrew Bresticker <abrestic@chromium.org> > Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > --- > Changes since v9: > Just respinning > > Changes since v8: > 1. rewrote the Documentation for device tree bindings > 2. Merged the https://lkml.org/lkml/2013/11/7/262 (as this is a fix) > 3. introduces "samsung,exynos5420-tmu-triminfo" and > "samsung,exynos5420-tmu-triminfo-clk" to handle the TMU channels on > Exynos5420 more appropriately > > .../devicetree/bindings/thermal/exynos-thermal.txt | 45 +++++++++ > drivers/thermal/samsung/exynos_tmu.c | 58 ++++++++++- > drivers/thermal/samsung/exynos_tmu.h | 2 + > drivers/thermal/samsung/exynos_tmu_data.c | 106 ++++++++++++++++++++ > drivers/thermal/samsung/exynos_tmu_data.h | 8 ++ > 5 files changed, 215 insertions(+), 4 deletions(-) I have replied to previous version by mistake, but since this is just a respin, same comments apply. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 116cca0..5055b31 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -6,6 +6,11 @@ "samsung,exynos4412-tmu" "samsung,exynos4210-tmu" "samsung,exynos5250-tmu" + "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420 + "samsung,exynos5420-tmu-triminfo" for TMU channel 2 Exynos5420 + (Must pass triminfo base) + "samsung,exynos5420-tmu-triminfo-clk" for TMU channel 3 and 4 + Exynos5420 (Must pass triminfo base and triminfo clock) "samsung,exynos5440-tmu" - interrupt-parent : The phandle for the interrupt controller - reg : Address range of the thermal registers. For soc's which has multiple @@ -13,6 +18,18 @@ interrupt related then 2 set of register has to supplied. First set belongs to each instance of TMU and second set belongs to second set of common TMU registers. + + NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU + channels 2, 3 and 4 + Use "samsung,exynos5420-tmu-triminfo" in cases, there is a misplaced + register but no need of another clock to access that base. + Use "samsung,exynos5420-tmu-triminfo-clk" in cases where there is a misplaced + register and we need another clock to access that base. + + TRIMINFO at 0x1006c000 contains data for TMU channel 3 + TRIMINFO at 0x100a0000 contains data for TMU channel 4 + TRIMINFO at 0x10068000 contains data for TMU channel 2 + - interrupts : Should contain interrupt for thermal system - clocks : The main clock for TMU device - clock-names : Thermal system clock name @@ -43,6 +60,34 @@ Example 2): clock-names = "tmu_apbif"; }; +Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") + /* tmu for CPU2 */ + tmu@10068000 { + compatible = "samsung,exynos5420-tmu-triminfo"; + reg = <0x10068000 0x100>, <0x1006c000 0x4>; + interrupts = <0 184 0>; + clocks = <&clock 318>; + clock-names = "tmu_apbif"; + }; + + /* tmu for CPU3 */ + tmu@1006c000 { + compatible = "samsung,exynos5420-tmu-triminfo-clk"; + reg = <0x1006c000 0x100>, <0x100a0000 0x4>; + interrupts = <0 185 0>; + clocks = <&clock 318>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + }; + + /* tmu for GPU */ + tmu@100a0000 { + compatible = "samsung,exynos5420-tmu-triminfo-clk"; + reg = <0x100a0000 0x100>, <0x10068000 0x4>; + interrupts = <0 215 0>; + clocks = <&clock 318>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + }; + Note: For multi-instance tmu each instance should have an alias correctly numbered in "aliases" node. diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index bbd0fc3..826647c 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -47,6 +47,7 @@ * @irq_work: pointer to the irq work structure. * @lock: lock to implement synchronization. * @clk: pointer to the clock structure. + * @clk_sec: pointer to the clock structure for accessing the base_second. * @temp_error1: fused value of the first point trim. * @temp_error2: fused value of the second point trim. * @regulator: pointer to the TMU regulator structure. @@ -61,7 +62,7 @@ struct exynos_tmu_data { enum soc_type soc; struct work_struct irq_work; struct mutex lock; - struct clk *clk; + struct clk *clk, *clk_sec; u8 temp_error1, temp_error2; struct regulator *regulator; struct thermal_sensor_conf *reg_conf; @@ -152,6 +153,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev) mutex_lock(&data->lock); clk_enable(data->clk); + if (!IS_ERR(data->clk_sec)) + clk_enable(data->clk_sec); if (TMU_SUPPORTS(pdata, READY_STATUS)) { status = readb(data->base + reg->tmu_status); @@ -186,7 +189,13 @@ static int exynos_tmu_initialize(struct platform_device *pdev) EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); } } else { - trim_info = readl(data->base + reg->triminfo_data); + /* On exynos5420 the triminfo register is in the shared space */ + if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO || + data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO_CLK) + trim_info = readl(data->base_second + + reg->triminfo_data); + else + trim_info = readl(data->base + reg->triminfo_data); } data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & @@ -301,6 +310,8 @@ skip_calib_data: out: clk_disable(data->clk); mutex_unlock(&data->lock); + if (!IS_ERR(data->clk_sec)) + clk_disable(data->clk_sec); return ret; } @@ -452,12 +463,16 @@ static void exynos_tmu_work(struct work_struct *work) const struct exynos_tmu_registers *reg = pdata->registers; unsigned int val_irq, val_type; + if (!IS_ERR(data->clk_sec)) + clk_enable(data->clk_sec); /* Find which sensor generated this interrupt */ if (reg->tmu_irqstatus) { val_type = readl(data->base_second + reg->tmu_irqstatus); if (!((val_type >> data->id) & 0x1)) goto out; } + if (!IS_ERR(data->clk_sec)) + clk_disable(data->clk_sec); exynos_report_trigger(data->reg_conf); mutex_lock(&data->lock); @@ -498,6 +513,18 @@ static const struct of_device_id exynos_tmu_match[] = { .data = (void *)EXYNOS5250_TMU_DRV_DATA, }, { + .compatible = "samsung,exynos5420-tmu", + .data = (void *)EXYNOS5420_TMU_DRV_DATA, + }, + { + .compatible = "samsung,exynos5420-tmu-triminfo", + .data = (void *)EXYNOS5420_TMU_DRV_DATA, + }, + { + .compatible = "samsung,exynos5420-tmu-triminfo-clk", + .data = (void *)EXYNOS5420_TMU_DRV_DATA, + }, + { .compatible = "samsung,exynos5440-tmu", .data = (void *)EXYNOS5440_TMU_DRV_DATA, }, @@ -628,13 +655,31 @@ static int exynos_tmu_probe(struct platform_device *pdev) return PTR_ERR(data->clk); } + data->clk_sec = devm_clk_get(&pdev->dev, "tmu_apbif_triminfo"); + if (IS_ERR(data->clk_sec)) { + if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO_CLK) { + dev_err(&pdev->dev, "Failed to get triminfo clock\n"); + return PTR_ERR(data->clk_sec); + } + } else { + ret = clk_prepare(data->clk_sec); + if (ret) { + dev_err(&pdev->dev, "Failed to get clock\n"); + return ret; + } + } + ret = clk_prepare(data->clk); - if (ret) - return ret; + if (ret) { + dev_err(&pdev->dev, "Failed to get clock\n"); + goto err_clk_sec; + } if (pdata->type == SOC_ARCH_EXYNOS4210 || pdata->type == SOC_ARCH_EXYNOS4412 || pdata->type == SOC_ARCH_EXYNOS5250 || + pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO || + pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO_CLK || pdata->type == SOC_ARCH_EXYNOS5440) data->soc = pdata->type; else { @@ -703,6 +748,9 @@ static int exynos_tmu_probe(struct platform_device *pdev) return 0; err_clk: clk_unprepare(data->clk); +err_clk_sec: + if (!IS_ERR(data->clk_sec)) + clk_unprepare(data->clk_sec); return ret; } @@ -715,6 +763,8 @@ static int exynos_tmu_remove(struct platform_device *pdev) exynos_unregister_thermal(data->reg_conf); clk_unprepare(data->clk); + if (!IS_ERR(data->clk_sec)) + clk_unprepare(data->clk_sec); if (!IS_ERR(data->regulator)) regulator_disable(data->regulator); diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 0d6b32f..f2eb3ac 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -43,6 +43,8 @@ enum soc_type { SOC_ARCH_EXYNOS4210 = 1, SOC_ARCH_EXYNOS4412, SOC_ARCH_EXYNOS5250, + SOC_ARCH_EXYNOS5420_TRIMINFO, + SOC_ARCH_EXYNOS5420_TRIMINFO_CLK, SOC_ARCH_EXYNOS5440, }; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index 1d27069..ff79c9a 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -194,6 +194,112 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { }; #endif +#if defined(CONFIG_SOC_EXYNOS5420) +static const struct exynos_tmu_registers exynos5420_tmu_registers = { + .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, + .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, + .tmu_status = EXYNOS_TMU_REG_STATUS, + .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, + .threshold_th0 = EXYNOS_THD_TEMP_RISE, + .threshold_th1 = EXYNOS_THD_TEMP_FALL, + .tmu_inten = EXYNOS_TMU_REG_INTEN, + .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, + .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, + .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, + /* INTEN_RISE3 Not availble in exynos5420 */ + .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, + .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, + .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, + .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT, + .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, + .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, + .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, + .emul_con = EXYNOS_EMUL_CON, + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, + .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, + .emul_time_mask = EXYNOS_EMUL_TIME_MASK, +}; + +#define __EXYNOS5420_TMU_DATA \ + .threshold_falling = 10, \ + .trigger_levels[0] = 85, \ + .trigger_levels[1] = 103, \ + .trigger_levels[2] = 110, \ + .trigger_levels[3] = 120, \ + .trigger_enable[0] = true, \ + .trigger_enable[1] = true, \ + .trigger_enable[2] = true, \ + .trigger_enable[3] = false, \ + .trigger_type[0] = THROTTLE_ACTIVE, \ + .trigger_type[1] = THROTTLE_ACTIVE, \ + .trigger_type[2] = SW_TRIP, \ + .trigger_type[3] = HW_TRIP, \ + .max_trigger_level = 4, \ + .gain = 8, \ + .reference_voltage = 16, \ + .noise_cancel_mode = 4, \ + .cal_type = TYPE_ONE_POINT_TRIMMING, \ + .efuse_value = 55, \ + .min_efuse_value = 40, \ + .max_efuse_value = 100, \ + .first_point_trim = 25, \ + .second_point_trim = 85, \ + .default_temp_offset = 50, \ + .freq_tab[0] = { \ + .freq_clip_max = 800 * 1000, \ + .temp_level = 85, \ + }, \ + .freq_tab[1] = { \ + .freq_clip_max = 200 * 1000, \ + .temp_level = 103, \ + }, \ + .freq_tab_count = 2, \ + .registers = &exynos5420_tmu_registers, \ + +#define EXYNOS5420_TMU_DATA \ + __EXYNOS5420_TMU_DATA \ + .type = SOC_ARCH_EXYNOS5250, \ + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ + TMU_SUPPORT_EMUL_TIME) + +#define EXYNOS5420_TMU_DATA_SHARED \ + __EXYNOS5420_TMU_DATA \ + .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \ + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ + TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) + +#define EXYNOS5420_TMU_DATA_SHARED_CLK \ + __EXYNOS5420_TMU_DATA \ + .type = SOC_ARCH_EXYNOS5420_TRIMINFO_CLK, \ + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ + TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) + +struct exynos_tmu_init_data const exynos5420_default_tmu_data = { + .tmu_data = { + { EXYNOS5420_TMU_DATA }, + { EXYNOS5420_TMU_DATA }, + { EXYNOS5420_TMU_DATA_SHARED }, + { EXYNOS5420_TMU_DATA_SHARED_CLK }, + { EXYNOS5420_TMU_DATA_SHARED_CLK }, + }, + .tmu_count = 5, +}; +#endif + #if defined(CONFIG_SOC_EXYNOS5440) static const struct exynos_tmu_registers exynos5440_tmu_registers = { .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index d9495a4..41f06dc 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -72,6 +72,7 @@ #define EXYNOS_TMU_CLEAR_RISE_INT 0x111 #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) #define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12 +#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16 #define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 @@ -156,6 +157,13 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; #define EXYNOS5250_TMU_DRV_DATA (NULL) #endif +#if defined(CONFIG_SOC_EXYNOS5420) +extern struct exynos_tmu_init_data const exynos5420_default_tmu_data; +#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data) +#else +#define EXYNOS5420_TMU_DRV_DATA (NULL) +#endif + #if defined(CONFIG_SOC_EXYNOS5440) extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; #define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)