diff mbox

[5/6] ARM: STi: DT: STiH416: Supply Thermal Controller Device Tree nodes

Message ID 1401980819-19962-6-git-send-email-lee.jones@linaro.org (mailing list archive)
State Not Applicable, archived
Delegated to: Zhang Rui
Headers show

Commit Message

Lee Jones June 5, 2014, 3:06 p.m. UTC
We supply two of these.  The first is controlled by the System Configuration
registers and the second one provided is a more traditional 'memory mapped'
variant.  Each are handled by they own sub-driver.

Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih416.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Maxime Coquelin July 21, 2014, 9:33 a.m. UTC | #1
Hi Lee,

On 06/05/2014 05:06 PM, Lee Jones wrote:
> We supply two of these.  The first is controlled by the System Configuration
> registers and the second one provided is a more traditional 'memory mapped'
> variant.  Each are handled by they own sub-driver.
>
> Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>   arch/arm/boot/dts/stih416.dtsi | 18 ++++++++++++++++++
>   1 file changed, 18 insertions(+)
>

Added to my queue for v3.17.

Thanks,
Maxime
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 06473c5..ed80220 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -236,5 +236,23 @@ 
 			resets	= <&powerdown STIH416_KEYSCAN_POWERDOWN>,
 				  <&softreset STIH416_KEYSCAN_SOFTRESET>;
 		};
+
+		temp0 {
+			compatible = "st,stih416-sas-thermal";
+			clock-names = "thermal";
+			clocks = <&clockgen_c_vcc 14>;
+
+			status = "okay";
+		};
+
+		temp1@fdfe8000 {
+			compatible = "st,stih416-mpe-thermal";
+			reg = <0xfdfe8000 0x10>;
+			clocks = <&clockgen_e 3>;
+			clock-names = "thermal";
+			interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+
+			status = "okay";
+		};
 	};
 };