@@ -345,10 +345,123 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e
#endif /*CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_IO_APIC
-static void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
- u32 gsi);
+#define MP_ISA_BUS 0
+
+static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
+ u32 gsi)
+{
+ int ioapic;
+ int pin;
+ struct mpc_intsrc mp_irq;
+
+ /*
+ * Convert 'gsi' to 'ioapic.pin'.
+ */
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0)
+ return;
+ pin = mp_find_ioapic_pin(ioapic, gsi);
+
+ /*
+ * TBD: This check is for faulty timer entries, where the override
+ * erroneously sets the trigger to level, resulting in a HUGE
+ * increase of timer interrupts!
+ */
+ if ((bus_irq == 0) && (trigger == 3))
+ trigger = 1;
+
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger << 2) | polarity;
+ mp_irq.srcbus = MP_ISA_BUS;
+ mp_irq.srcbusirq = bus_irq; /* IRQ */
+ mp_irq.dstapic = mpc_ioapic_id(ioapic); /* APIC ID */
+ mp_irq.dstirq = pin; /* INTIN# */
+
+ mp_save_irq(&mp_irq);
+
+ isa_irq_to_gsi[bus_irq] = gsi;
+}
+
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+ int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
+ int ioapic;
+ u8 pin;
+
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev || !dev_is_pci(dev))
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mpc_ioapic_id(ioapic);
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ mp_save_irq(&mp_irq);
+#endif
+ return 0;
+}
+
static int mp_register_gsi(struct device *dev, u32 gsi, int trigger,
- int polarity);
+ int polarity)
+{
+ int ioapic;
+ int ioapic_pin;
+ struct io_apic_irq_attr irq_attr;
+ int ret;
+
+ if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+ return gsi;
+
+ /* Don't set up the ACPI SCI because it's already set up */
+ if (acpi_gbl_FADT.sci_interrupt == gsi)
+ return gsi;
+
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0) {
+ printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+ return gsi;
+ }
+
+ ioapic_pin = mp_find_ioapic_pin(ioapic, gsi);
+
+ if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
+ printk(KERN_ERR "Invalid reference to IOAPIC pin "
+ "%d-%d\n", mpc_ioapic_id(ioapic),
+ ioapic_pin);
+ return gsi;
+ }
+
+ if (enable_update_mptable)
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
+
+ set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+ trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ ret = io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
+ if (ret < 0)
+ gsi = INT_MIN;
+
+ return gsi;
+}
+
static int __init
acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
@@ -905,44 +1018,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_IO_APIC
-#define MP_ISA_BUS 0
-
-static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
- u32 gsi)
-{
- int ioapic;
- int pin;
- struct mpc_intsrc mp_irq;
-
- /*
- * Convert 'gsi' to 'ioapic.pin'.
- */
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0)
- return;
- pin = mp_find_ioapic_pin(ioapic, gsi);
-
- /*
- * TBD: This check is for faulty timer entries, where the override
- * erroneously sets the trigger to level, resulting in a HUGE
- * increase of timer interrupts!
- */
- if ((bus_irq == 0) && (trigger == 3))
- trigger = 1;
-
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (trigger << 2) | polarity;
- mp_irq.srcbus = MP_ISA_BUS;
- mp_irq.srcbusirq = bus_irq; /* IRQ */
- mp_irq.dstapic = mpc_ioapic_id(ioapic); /* APIC ID */
- mp_irq.dstirq = pin; /* INTIN# */
-
- mp_save_irq(&mp_irq);
-
- isa_irq_to_gsi[bus_irq] = gsi;
-}
-
static void __init mp_config_acpi_legacy_irqs(void)
{
int i;
@@ -1009,85 +1084,6 @@ static void __init mp_config_acpi_legacy_irqs(void)
}
}
-static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
- int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
- struct mpc_intsrc mp_irq;
- struct pci_dev *pdev;
- unsigned char number;
- unsigned int devfn;
- int ioapic;
- u8 pin;
-
- if (!acpi_ioapic)
- return 0;
- if (!dev || !dev_is_pci(dev))
- return 0;
-
- pdev = to_pci_dev(dev);
- number = pdev->bus->number;
- devfn = pdev->devfn;
- pin = pdev->pin;
- /* print the entry should happen on mptable identically */
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
- (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
- mp_irq.srcbus = number;
- mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
- ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mpc_ioapic_id(ioapic);
- mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
- mp_save_irq(&mp_irq);
-#endif
- return 0;
-}
-
-static int mp_register_gsi(struct device *dev, u32 gsi, int trigger,
- int polarity)
-{
- int ioapic;
- int ioapic_pin;
- struct io_apic_irq_attr irq_attr;
- int ret;
-
- if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
- return gsi;
-
- /* Don't set up the ACPI SCI because it's already set up */
- if (acpi_gbl_FADT.sci_interrupt == gsi)
- return gsi;
-
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0) {
- printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
- return gsi;
- }
-
- ioapic_pin = mp_find_ioapic_pin(ioapic, gsi);
-
- if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
- printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mpc_ioapic_id(ioapic),
- ioapic_pin);
- return gsi;
- }
-
- if (enable_update_mptable)
- mp_config_acpi_gsi(dev, gsi, trigger, polarity);
-
- set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
- trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- ret = io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
- if (ret < 0)
- gsi = INT_MIN;
-
- return gsi;
-}
-
/*
* Parse IOAPIC related entries in MADT
* returns 0 on success, < 0 on error
Reorganize code to avoid forward declaration in boot.c, no function changes. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> --- arch/x86/kernel/acpi/boot.c | 236 +++++++++++++++++++++---------------------- 1 file changed, 116 insertions(+), 120 deletions(-)