===================================================================
@@ -10,6 +10,8 @@
* This file is released under the GPLv2.
*/
+#define pr_fmt(fmt) "PM: " fmt
+
#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/syscalls.h>
@@ -104,7 +106,7 @@ EXPORT_SYMBOL(system_entering_hibernatio
#ifdef CONFIG_PM_DEBUG
static void hibernation_debug_sleep(void)
{
- printk(KERN_INFO "hibernation debug: Waiting for 5 seconds.\n");
+ pr_info("hibernation debug: Waiting for 5 seconds.\n");
mdelay(5000);
}
@@ -250,10 +252,9 @@ void swsusp_show_speed(ktime_t start, kt
centisecs = 1; /* avoid div-by-zero */
k = nr_pages * (PAGE_SIZE / 1024);
kps = (k * 100) / centisecs;
- printk(KERN_INFO "PM: %s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n",
- msg, k,
- centisecs / 100, centisecs % 100,
- kps / 1000, (kps % 1000) / 10);
+ pr_info("%s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n",
+ msg, k, centisecs / 100, centisecs % 100, kps / 1000,
+ (kps % 1000) / 10);
}
/**
@@ -271,8 +272,7 @@ static int create_image(int platform_mod
error = dpm_suspend_end(PMSG_FREEZE);
if (error) {
- printk(KERN_ERR "PM: Some devices failed to power down, "
- "aborting hibernation\n");
+ pr_err("Some devices failed to power down, aborting hibernation\n");
return error;
}
@@ -288,8 +288,7 @@ static int create_image(int platform_mod
error = syscore_suspend();
if (error) {
- printk(KERN_ERR "PM: Some system devices failed to power down, "
- "aborting hibernation\n");
+ pr_err("Some system devices failed to power down, aborting hibernation\n");
goto Enable_irqs;
}
@@ -304,8 +303,8 @@ static int create_image(int platform_mod
restore_processor_state();
trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, false);
if (error)
- printk(KERN_ERR "PM: Error %d creating hibernation image\n",
- error);
+ pr_err("Error %d creating hibernation image\n", error);
+
if (!in_suspend) {
events_check_enabled = false;
clear_free_pages();
@@ -432,8 +431,7 @@ static int resume_target_kernel(bool pla
error = dpm_suspend_end(PMSG_QUIESCE);
if (error) {
- printk(KERN_ERR "PM: Some devices failed to power down, "
- "aborting resume\n");
+ pr_err("Some devices failed to power down, aborting resume\n");
return error;
}
@@ -619,7 +617,7 @@ static void power_down(void)
/* Restore swap signature. */
error = swsusp_unmark();
if (error)
- pr_err("PM: Swap will be unusable! Try swapon -a.\n");
+ pr_err("Swap will be unusable! Try swapon -a.\n");
return;
}
@@ -642,7 +640,7 @@ static void power_down(void)
* Valid image is on the disk, if we continue we risk serious data
* corruption after resume.
*/
- printk(KERN_CRIT "PM: Please power down manually\n");
+ pr_crit("Power down manually\n");
while (1)
cpu_relax();
}
@@ -652,7 +650,7 @@ static int load_image_and_restore(void)
int error;
unsigned int flags;
- pr_debug("PM: Loading hibernation image.\n");
+ pr_debug("Loading hibernation image.\n");
lock_device_hotplug();
error = create_basic_memory_bitmaps();
@@ -664,7 +662,7 @@ static int load_image_and_restore(void)
if (!error)
hibernation_restore(flags & SF_PLATFORM_MODE);
- printk(KERN_ERR "PM: Failed to load hibernation image, recovering.\n");
+ pr_err("Failed to load hibernation image, recovering.\n");
swsusp_free();
free_basic_memory_bitmaps();
Unlock:
@@ -682,7 +680,7 @@ int hibernate(void)
bool snapshot_test = false;
if (!hibernation_available()) {
- pr_debug("PM: Hibernation not available.\n");
+ pr_debug("Hibernation not available.\n");
return -EPERM;
}
@@ -700,9 +698,9 @@ int hibernate(void)
goto Exit;
}
- printk(KERN_INFO "PM: Syncing filesystems ... ");
+ pr_info("Syncing filesystems ... \n");
sys_sync();
- printk("done.\n");
+ pr_info("done.\n");
error = freeze_processes();
if (error)
@@ -728,7 +726,7 @@ int hibernate(void)
else
flags |= SF_CRC32_MODE;
- pr_debug("PM: writing image.\n");
+ pr_debug("Writing image.\n");
error = swsusp_write(flags);
swsusp_free();
if (!error) {
@@ -740,7 +738,7 @@ int hibernate(void)
in_suspend = 0;
pm_restore_gfp_mask();
} else {
- pr_debug("PM: Image restored successfully.\n");
+ pr_debug("Image restored successfully.\n");
}
Free_bitmaps:
@@ -748,7 +746,7 @@ int hibernate(void)
Thaw:
unlock_device_hotplug();
if (snapshot_test) {
- pr_debug("PM: Checking hibernation image\n");
+ pr_debug("Checking hibernation image\n");
error = swsusp_check();
if (!error)
error = load_image_and_restore();
@@ -812,10 +810,10 @@ static int software_resume(void)
goto Unlock;
}
- pr_debug("PM: Checking hibernation image partition %s\n", resume_file);
+ pr_debug("Checking hibernation image partition %s\n", resume_file);
if (resume_delay) {
- printk(KERN_INFO "Waiting %dsec before reading resume device...\n",
+ pr_info("Waiting %dsec before reading resume device ...\n",
resume_delay);
ssleep(resume_delay);
}
@@ -854,10 +852,10 @@ static int software_resume(void)
}
Check_image:
- pr_debug("PM: Hibernation image partition %d:%d present\n",
+ pr_debug("Hibernation image partition %d:%d present\n",
MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
- pr_debug("PM: Looking for hibernation image.\n");
+ pr_debug("Looking for hibernation image.\n");
error = swsusp_check();
if (error)
goto Unlock;
@@ -876,7 +874,7 @@ static int software_resume(void)
goto Close_Finish;
}
- pr_debug("PM: Preparing processes for restore.\n");
+ pr_debug("Preparing processes for restore.\n");
error = freeze_processes();
if (error)
goto Close_Finish;
@@ -889,7 +887,7 @@ static int software_resume(void)
/* For success case, the suspend path will release the lock */
Unlock:
mutex_unlock(&pm_mutex);
- pr_debug("PM: Hibernation image not present or could not be loaded.\n");
+ pr_debug("Hibernation image not present or could not be loaded.\n");
return error;
Close_Finish:
swsusp_close(FMODE_READ);
@@ -1013,7 +1011,7 @@ static ssize_t disk_store(struct kobject
error = -EINVAL;
if (!error)
- pr_debug("PM: Hibernation mode set to '%s'\n",
+ pr_debug("Hibernation mode set to '%s'\n",
hibernation_modes[mode]);
unlock_system_sleep();
return error ? error : n;
@@ -1049,7 +1047,7 @@ static ssize_t resume_store(struct kobje
lock_system_sleep();
swsusp_resume_device = res;
unlock_system_sleep();
- printk(KERN_INFO "PM: Starting manual resume from disk\n");
+ pr_info("Starting manual resume from disk\n");
noresume = 0;
software_resume();
return n;