| Message ID | 1407320706-17440-3-git-send-email-mperttunen@nvidia.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Eduardo Valentin |
| Headers | show |
On 08/06/2014 04:25 AM, Mikko Perttunen wrote: > This adds the soctherm thermal sensing and management unit to the > Tegra124 device tree along with the four thermal zones corresponding > to the four thermal sensors provided by soctherm. > diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi > + thermal-zones { > + soctherm: soctherm@0,700e2000 { > cpus { The sort order of these nodes is wrong; nodes with reg should be sorted according to the reg value. Nodes without reg should be sorted alpha-numerically. That would place soctherm after sdhci@0,700b0600, and thermal-zones before timer. soctherm isn't a generic node name but sounds more like an identity; thermal-sensor sounds like a better node name (but the node label can still be soctherm if you want; label names don't show up in the DT ABI). If these are the only issues, they can probably be fixed manually when applying the patches, assuming a Tegra maintainer does it - I wouldn't want to burden anyone else with that. -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 03916ef..a579fab 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/tegra124-soctherm.h> #include "skeleton.dtsi" @@ -756,6 +757,52 @@ status = "disabled"; }; + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + }; + + mem { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>; + }; + + gpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>; + }; + + pllx { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>; + }; + }; + + soctherm: soctherm@0,700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x0 0x700e2000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + }; + cpus { #address-cells = <1>; #size-cells = <0>;
This adds the soctherm thermal sensing and management unit to the Tegra124 device tree along with the four thermal zones corresponding to the four thermal sensors provided by soctherm. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- arch/arm/boot/dts/tegra124.dtsi | 47 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)