@@ -18,6 +18,7 @@
*/
#include "skeleton.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos3250.h>
/ {
@@ -188,6 +189,7 @@
interrupts = <0 216 0>;
clocks = <&cmu CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
status = "disabled";
};
@@ -645,4 +645,8 @@
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
+
+ tmu: tmu@100C0000 {
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
};
@@ -21,6 +21,7 @@
#include "exynos4.dtsi"
#include "exynos4210-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
/ {
compatible = "samsung,exynos4210", "samsung,exynos4";
@@ -146,16 +147,38 @@
reg = <0x03860000 0x1000>;
};
- tmu@100C0000 {
+ tmu: tmu@100C0000 {
compatible = "samsung,exynos4210-tmu";
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
+ samsung,tmu_gain = <15>;
+ samsung,tmu_reference_voltage = <7>;
status = "disabled";
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert0: cpu-alert-0 {
+ temperature = <85000>; /* millicelsius */
+ };
+ cpu_alert1: cpu-alert-1 {
+ temperature = <100000>; /* millicelsius */
+ };
+ cpu_alert2: cpu-alert-2 {
+ temperature = <110000>; /* millicelsius */
+ };
+ };
+ };
+ };
+
g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
@@ -19,6 +19,7 @@
#include "exynos4.dtsi"
#include "exynos4x12-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
/ {
aliases {
@@ -20,7 +20,7 @@
#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
-
+#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos-audss-clk.h>
/ {
@@ -236,16 +236,21 @@
status = "disabled";
};
- tmu@10060000 {
+ tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tmu 0>;
+
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
@@ -761,6 +761,7 @@
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu1: tmu@10064000 {
@@ -769,6 +770,7 @@
interrupts = <0 183 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu2: tmu@10068000 {
@@ -777,6 +779,7 @@
interrupts = <0 184 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_cpu3: tmu@1006c000 {
@@ -785,6 +788,7 @@
interrupts = <0 185 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
};
tmu_gpu: tmu@100a0000 {
@@ -793,6 +797,30 @@
interrupts = <0 215 0>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ thermal-sensors = <&tmu_cpu0>;
+ #include "exynos5420-trip-points.dtsi"
+ };
+ cpu1_thermal: cpu1-thermal {
+ thermal-sensors = <&tmu_cpu1>;
+ #include "exynos5420-trip-points.dtsi"
+ };
+ cpu2_thermal: cpu2-thermal {
+ thermal-sensors = <&tmu_cpu2>;
+ #include "exynos5420-trip-points.dtsi"
+ };
+ cpu3_thermal: cpu3-thermal {
+ thermal-sensors = <&tmu_cpu3>;
+ #include "exynos5420-trip-points.dtsi"
+ };
+ gpu_thermal: gpu-thermal {
+ thermal-sensors = <&tmu_gpu>;
+ #include "exynos5420-trip-points.dtsi"
+ };
};
watchdog: watchdog@101D0000 {
@@ -219,6 +219,7 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
+ #include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_1: tmuctrl@16011C {
@@ -227,6 +228,7 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
+ #include "exynos5440-tmu-sensor-conf.dtsi"
};
tmuctrl_2: tmuctrl@160120 {
@@ -235,6 +237,22 @@
interrupts = <0 58 0>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
+ #include "exynos5440-tmu-sensor-conf.dtsi"
+ };
+
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ thermal-sensors = <&tmuctrl_0>;
+ #include "exynos5440-trip-points.dtsi"
+ };
+ cpu1_thermal: cpu1-thermal {
+ thermal-sensors = <&tmuctrl_1>;
+ #include "exynos5440-trip-points.dtsi"
+ };
+ cpu2_thermal: cpu2-thermal {
+ thermal-sensors = <&tmuctrl_2>;
+ #include "exynos5440-trip-points.dtsi"
+ };
};
sata@210000 {
Presented device tree bindings provide data already hardcoded in the exynos_tmu_data.c file. After this commit, it should be possible to reuse common thermal core framework in Exynos SoCs. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> --- Changes for v2: - Add proper TMU entries for exynos3250.dtsi Changes for v3: - Remove "type" DT properties, which will be extracted from compatible - "samsung,tmu_" prefix for TMU specific properties has been added Changes for v4: - Providing mandatory properties for thermal-zones (Exynos4210 and Exynos5250) --- arch/arm/boot/dts/exynos3250.dtsi | 2 ++ arch/arm/boot/dts/exynos4.dtsi | 4 ++++ arch/arm/boot/dts/exynos4210.dtsi | 25 ++++++++++++++++++++++++- arch/arm/boot/dts/exynos4x12.dtsi | 1 + arch/arm/boot/dts/exynos5250.dtsi | 9 +++++++-- arch/arm/boot/dts/exynos5420.dtsi | 28 ++++++++++++++++++++++++++++ arch/arm/boot/dts/exynos5440.dtsi | 18 ++++++++++++++++++ 7 files changed, 84 insertions(+), 3 deletions(-)