@@ -147,6 +147,16 @@ config CLOCK_THERMAL
device that is configured to use this cooling mechanism will be
controlled to reduce clock frequency whenever temperature is high.
+config DEVFREQ_THERMAL
+ bool "Generic device cooling support"
+ depends on PM_DEVFREQ
+ help
+ This implements the generic devfreq cooling mechanism through
+ frequency reduction for devices using devfreq.
+
+ This will throttle the device by limiting the maximum allowed DVFS
+ frequency corresponding to the cooling level.
+
If you want this support, you should say Y here.
config THERMAL_EMULATION
@@ -22,6 +22,9 @@ thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
# clock cooling
thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o
+# devfreq cooling
+thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
+
# platform thermal drivers
obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o
obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
new file mode 100644
@@ -0,0 +1,388 @@
+/*
+ * devfreq_cooling: Thermal cooling device implementation for devices using
+ * devfreq
+ *
+ * Copyright (C) 2014-2015 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/devfreq.h>
+#include <linux/devfreq_cooling.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/pm_opp.h>
+#include <linux/thermal.h>
+
+static int devfreq_cooling_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct devfreq_cooling_device *dfc = cdev->devdata;
+ struct devfreq *df = dfc->devfreq;
+
+ *state = df->profile->max_state - 1;
+
+ return 0;
+}
+
+static int devfreq_cooling_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct devfreq_cooling_device *dfc = cdev->devdata;
+
+ *state = dfc->cooling_state;
+
+ return 0;
+}
+
+static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ struct devfreq_cooling_device *dfc = cdev->devdata;
+ struct devfreq *df = dfc->devfreq;
+ struct device *dev = df->dev.parent;
+ unsigned long freq, index;
+ unsigned long max_state = df->profile->max_state;
+
+ if (state == dfc->cooling_state)
+ return 0;
+
+ dev_dbg(dev, "Setting cooling state %lu\n", state);
+
+ if (state >= max_state)
+ return -EINVAL;
+
+ index = (max_state - 1) - state;
+ freq = df->profile->freq_table[index];
+
+ if (df->max_freq != freq)
+ devfreq_qos_set_max(df, freq);
+
+ dfc->cooling_state = state;
+
+ return 0;
+}
+
+static unsigned long
+freq_get_state(struct devfreq *df, unsigned long freq)
+{
+ unsigned long state = THERMAL_CSTATE_INVALID;
+ int i;
+
+ for (i = 0; i < df->profile->max_state; i++) {
+ if (df->profile->freq_table[i] == freq)
+ state = (df->profile->max_state - 1) - i;
+ }
+
+ return state;
+}
+
+static unsigned long
+state_get_freq(struct devfreq *df, unsigned long state)
+{
+ unsigned long index = (df->profile->max_state - 1) - state;
+
+ if (index >= df->profile->max_state)
+ return 0;
+
+ return df->profile->freq_table[index];
+}
+
+static unsigned long
+get_static_power(struct devfreq_cooling_device *dfc, unsigned long freq)
+{
+ struct devfreq *df = dfc->devfreq;
+ struct device *dev = df->dev.parent;
+ unsigned long voltage;
+ struct dev_pm_opp *opp;
+
+ rcu_read_lock();
+ opp = dev_pm_opp_find_freq_exact(dev, freq, true);
+ voltage = dev_pm_opp_get_voltage(opp) / 1000; /* mV */
+ rcu_read_unlock();
+
+ if (voltage == 0) {
+ dev_warn_ratelimited(dev,
+ "Failed to get voltage for frequency %lu: %ld\n",
+ freq, IS_ERR(opp) ? PTR_ERR(opp) : 0);
+ return 0;
+ }
+
+ return dfc->power_ops->get_static_power(voltage);
+}
+
+static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cdev,
+ struct thermal_zone_device *tz,
+ u32 *power)
+{
+ struct devfreq_cooling_device *dfc = cdev->devdata;
+ struct devfreq *df = dfc->devfreq;
+ struct devfreq_dev_status *status = &df->last_status;
+ unsigned long state;
+ unsigned long freq = status->current_frequency;
+ u32 dyn_power, static_power;
+
+ /* Get dynamic power for state */
+ state = freq_get_state(df, freq);
+ if (state == THERMAL_CSTATE_INVALID)
+ return -EAGAIN;
+
+ dyn_power = dfc->power_table[state];
+
+ /* Scale dynamic power for utilization */
+ dyn_power = (dyn_power * status->busy_time) / status->total_time;
+
+ /* Get static power */
+ static_power = get_static_power(dfc, freq);
+
+ *power = dyn_power + static_power;
+
+ return 0;
+}
+
+static int devfreq_cooling_state2power(struct thermal_cooling_device *cdev,
+ struct thermal_zone_device *tz,
+ unsigned long state,
+ u32 *power)
+{
+ struct devfreq_cooling_device *dfc = cdev->devdata;
+ struct devfreq *df = dfc->devfreq;
+ unsigned long freq;
+ u32 static_power;
+
+ freq = state_get_freq(df, state);
+ static_power = get_static_power(dfc, freq);
+
+ *power = dfc->power_table[state] + static_power;
+ return 0;
+}
+
+static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev,
+ struct thermal_zone_device *tz,
+ u32 power, unsigned long *state)
+{
+ struct devfreq_cooling_device *dfc = cdev->devdata;
+ struct devfreq *df = dfc->devfreq;
+ struct devfreq_dev_status *status = &df->last_status;
+ unsigned long freq = status->current_frequency;
+ unsigned long busy_time;
+ s32 dyn_power;
+ u32 static_power;
+ int i;
+
+ static_power = get_static_power(dfc, freq);
+
+ dyn_power = power - static_power;
+ dyn_power = dyn_power > 0 ? dyn_power : 0;
+
+ /* Scale dynamic power for utilization */
+ busy_time = status->busy_time ?: 1;
+ dyn_power = (dyn_power * status->total_time) / busy_time;
+
+ /*
+ * Find the first cooling state that is within the power
+ * budget for dynamic power.
+ */
+ for (i = 0; i < df->profile->max_state - 1; i++)
+ if (dyn_power >= dfc->power_table[i])
+ break;
+
+ *state = i;
+ return 0;
+}
+
+static struct thermal_cooling_device_ops devfreq_cooling_ops = {
+ .get_max_state = devfreq_cooling_get_max_state,
+ .get_cur_state = devfreq_cooling_get_cur_state,
+ .set_cur_state = devfreq_cooling_set_cur_state,
+};
+
+/**
+ * devfreq_cooling_gen_power_table(): - Generate power table.
+ * @dfc: Pointer to devfreq cooling device.
+ *
+ * Generate a table with the device's maximum power usage at each cooling
+ * state (OPP). The static and dynamic powerm using the appropriate voltage and
+ * frequency for the state, is acquired from the struct devfreq_cooling_ops, and
+ * summed to make the maximum power draw.
+ *
+ * The table is malloced, and a pointer put in dfc->power_table. This must be
+ * freed when unregistering the devfreq cooling device.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+static int devfreq_cooling_gen_power_table(struct devfreq_cooling_device *dfc)
+{
+ struct devfreq *df = dfc->devfreq;
+ struct device *dev = df->dev.parent;
+ int num_opps;
+ struct devfreq_cooling_ops *callbacks = dfc->power_ops;
+ unsigned long freq;
+ u32 *table;
+ int i;
+
+ if (!IS_ENABLED(CONFIG_PM_OPP)) {
+ dev_warn(dev, "Can't use power extensions of the devfreq cooling device without CONFIG_PM_OPP\n");
+ return -EINVAL;
+ }
+
+ rcu_read_lock();
+ num_opps = dev_pm_opp_get_opp_count(dev);
+
+ if (num_opps != dfc->devfreq->profile->max_state) {
+ rcu_read_unlock();
+ return -ERANGE;
+ }
+
+ table = devm_kcalloc(dev, num_opps, sizeof(*table), GFP_KERNEL);
+ if (!table) {
+ rcu_read_unlock();
+ return -ENOMEM;
+ }
+
+ for (i = 0, freq = ULONG_MAX; i < num_opps; i++, freq--) {
+ unsigned long power_dyn, voltage;
+ struct dev_pm_opp *opp;
+
+ opp = dev_pm_opp_find_freq_floor(dev, &freq);
+ if (IS_ERR(opp))
+ break;
+
+ voltage = dev_pm_opp_get_voltage(opp) / 1000; /* mV */
+
+ power_dyn = callbacks->get_dynamic_power(freq, voltage);
+
+ dev_info(dev, "Dynamic power table: %lu MHz @ %lu mV: %lu = %lu mW\n",
+ freq / 1000000, voltage, power_dyn, power_dyn);
+
+ table[i] = power_dyn;
+ }
+ rcu_read_unlock();
+
+ if (i != num_opps) {
+ devm_kfree(dev, table);
+ return -EFAULT;
+ }
+
+ dfc->power_table = table;
+
+ return 0;
+}
+
+/**
+ * of_devfreq_cooling_register_power(): - Register devfreq cooling device,
+ * with OF and power information.
+ * @np: Pointer to OF device_node.
+ * @df: Pointer to devfreq device.
+ * @ops: Pointer to power ops.
+ */
+struct devfreq_cooling_device *
+of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
+ struct devfreq_cooling_ops *ops)
+{
+ struct thermal_cooling_device *cdev;
+ struct devfreq_cooling_device *dfc;
+ struct device *dev = df->dev.parent;
+ int err;
+
+ /* freq_table is required to look map state index to frequency. */
+ if (!df->profile->max_state || !df->profile->freq_table)
+ return ERR_PTR(-EINVAL);
+
+ dfc = devm_kzalloc(dev, sizeof(*dfc), GFP_KERNEL);
+ if (!dfc)
+ return ERR_PTR(-ENOMEM);
+
+ dfc->devfreq = df;
+
+ if (ops) {
+ if (!ops->get_static_power || !ops->get_dynamic_power) {
+ err = -EINVAL;
+ goto free_dfc;
+ }
+ dfc->power_ops = ops;
+
+ err = devfreq_cooling_gen_power_table(dfc);
+ if (err)
+ goto free_dfc;
+
+ devfreq_cooling_ops.get_requested_power =
+ devfreq_cooling_get_requested_power;
+ devfreq_cooling_ops.state2power = devfreq_cooling_state2power;
+ devfreq_cooling_ops.power2state = devfreq_cooling_power2state;
+ }
+
+ cdev = thermal_of_cooling_device_register(np, "devfreq", dfc,
+ &devfreq_cooling_ops);
+ if (IS_ERR(cdev)) {
+ err = PTR_ERR(cdev);
+ dev_err(df->dev.parent,
+ "Failed to register devfreq cooling device (%d)\n",
+ err);
+ goto free_power_table;
+ }
+
+ dfc->cdev = cdev;
+
+ return dfc;
+
+free_power_table:
+ if (dfc->power_table)
+ devm_kfree(dev, dfc->power_table);
+free_dfc:
+ devm_kfree(dev, dfc);
+
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL(of_devfreq_cooling_register_power);
+
+/**
+ * of_devfreq_cooling_register(): - Register devfreq cooling device,
+ * with OF information.
+ * @np: Pointer to OF device_node.
+ * @df: Pointer to devfreq device.
+ */
+struct devfreq_cooling_device *
+of_devfreq_cooling_register(struct device_node *np, struct devfreq *df)
+{
+ return of_devfreq_cooling_register_power(np, df, NULL);
+}
+EXPORT_SYMBOL(of_devfreq_cooling_register);
+
+/**
+ * devfreq_cooling_register(): - Register devfreq cooling device.
+ * @df: Pointer to devfreq device.
+ */
+struct devfreq_cooling_device *devfreq_cooling_register(struct devfreq *df)
+{
+ return of_devfreq_cooling_register(NULL, df);
+}
+EXPORT_SYMBOL(devfreq_cooling_register);
+
+/**
+ * devfreq_cooling_unregister(): - Unregister devfreq cooling device.
+ * @dfc: Pointer to devfreq cooling device to unregister.
+ */
+void devfreq_cooling_unregister(struct devfreq_cooling_device *dfc)
+{
+ struct device *dev;
+
+ if (!dfc)
+ return;
+
+ dev = dfc->devfreq->dev.parent;
+
+ thermal_cooling_device_unregister(dfc->cdev);
+
+ if (dfc->power_table)
+ devm_kfree(dev, dfc->power_table);
+ devm_kfree(dev, dfc);
+}
+EXPORT_SYMBOL(devfreq_cooling_unregister);
new file mode 100644
@@ -0,0 +1,90 @@
+/*
+ * devfreq_cooling: Thermal cooling device implementation for devices using
+ * devfreq
+ *
+ * Copyright (C) 2014 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DEVFREQ_COOLING_H__
+#define __DEVFREQ_COOLING_H__
+
+#include <linux/devfreq.h>
+#include <linux/thermal.h>
+
+#ifdef CONFIG_DEVFREQ_THERMAL
+
+/**
+ * struct devfreq_cooling_ops - Devfreq cooling power ops
+ * @get_static_power: Take voltage, in mV, and return the static power in mW.
+ * @get_dynamic_power: Take voltage, in mV, and frequency, in HZ, and return
+ * the dynamic power draw in mW.
+ */
+struct devfreq_cooling_ops {
+ unsigned long (*get_static_power)(unsigned long voltage);
+ unsigned long (*get_dynamic_power)(unsigned long freq,
+ unsigned long voltage);
+};
+
+/**
+ * struct devfreq_cooling_device - Devfreq cooling device
+ * @cdev: Pointer to associated thermal cooling device.
+ * @devfreq: Pointer to associated devfreq device.
+ * @cooling_state: Current cooling state.
+ * @power_table: Pointer to table with maximum power draw for each cooling
+ * state. State is the index into the table, and the power is
+ * stated in mW.
+ * @power_ops: Pointer to power operations, used to generate @power_table.
+ */
+struct devfreq_cooling_device {
+ struct thermal_cooling_device *cdev;
+ struct devfreq *devfreq;
+ unsigned long cooling_state;
+ u32 *power_table;
+ struct devfreq_cooling_ops *power_ops;
+};
+
+struct devfreq_cooling_device *
+of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
+ struct devfreq_cooling_ops *ops);
+struct devfreq_cooling_device *
+of_devfreq_cooling_register(struct device_node *np, struct devfreq *df);
+struct devfreq_cooling_device *devfreq_cooling_register(struct devfreq *df);
+void devfreq_cooling_unregister(struct devfreq_cooling_device *dfc);
+
+#else /* !CONFIG_DEVFREQ_THERMAL */
+
+struct devfreq_cooling_device *
+of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
+ struct devfreq_cooling_ops *ops)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+static inline struct devfreq_cooling_device *
+of_devfreq_cooling_register(struct device_node *np, struct devfreq *df)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+static inline struct devfreq_cooling_device *
+devfreq_cooling_register(struct devfreq *df)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+static inline void
+devfreq_cooling_unregister(struct devfreq_cooling_device *dfc)
+{
+}
+
+#endif /* CONFIG_DEVFREQ_THERMAL */
+#endif /* __DEVFREQ_COOLING_H__ */