| Message ID | 1438010430-5802-1-git-send-email-lee.jones@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 27-07-15, 16:20, Lee Jones wrote: > Cc: devicetree@vger.kernel.org > Signed-off-by: Lee Jones <lee.jones@linaro.org> > --- > > Changelog: > - Using OPP-v2 > - Moved (and linked) a bunch of documentation to ../power/ > > .../devicetree/bindings/cpufreq/cpufreq-st.txt | 40 ++++++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt > new file mode 100644 > index 0000000..79add9d > --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt > @@ -0,0 +1,40 @@ > +Binding for ST's CPUFreq driver > +=============================== > + > +Frequency Scaling only > +---------------------- > + > +Located in CPU's node: > + > +- operating-points : [See: ../power/opp.txt] > + > +Example [safe] > +-------------- > + > +cpus { > + cpu@0 { > + /* kHz uV */ > + operating-points = <1500000 0 > + 1200000 0 > + 800000 0 > + 500000 0>; > + }; > +}; > + > +Dynamic Voltage and Frequency Scaling (DVFS) > +-------------------------------------------- > + > +Located in CPU's node: > + > +- operating-points-v2-sti : [See ../power/opp-st.txt] > + > +Example [unsafe] > +---------------- > + > +cpus { > + cpu@0 { > + operating-points-v2 = <[OPP list phandle]>; > + }; > +}; > + > +For an example of an OPP list, see ../power/opp-st.txt. I don't think you need this file/patch at all.. It is almost blank and doesn't define a binding. And so there is no need to specify this at all. Just an OPP binding file is enough.
On Tue, 28 Jul 2015, Viresh Kumar wrote: > On 27-07-15, 16:20, Lee Jones wrote: > > Cc: devicetree@vger.kernel.org > > Signed-off-by: Lee Jones <lee.jones@linaro.org> > > --- > > > > Changelog: > > - Using OPP-v2 > > - Moved (and linked) a bunch of documentation to ../power/ > > > > .../devicetree/bindings/cpufreq/cpufreq-st.txt | 40 ++++++++++++++++++++++ > > 1 file changed, 40 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt > > > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt > > new file mode 100644 > > index 0000000..79add9d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt > > @@ -0,0 +1,40 @@ > > +Binding for ST's CPUFreq driver > > +=============================== > > + > > +Frequency Scaling only > > +---------------------- > > + > > +Located in CPU's node: > > + > > +- operating-points : [See: ../power/opp.txt] > > + > > +Example [safe] > > +-------------- > > + > > +cpus { > > + cpu@0 { > > + /* kHz uV */ > > + operating-points = <1500000 0 > > + 1200000 0 > > + 800000 0 > > + 500000 0>; > > + }; > > +}; > > + > > +Dynamic Voltage and Frequency Scaling (DVFS) > > +-------------------------------------------- > > + > > +Located in CPU's node: > > + > > +- operating-points-v2-sti : [See ../power/opp-st.txt] > > + > > +Example [unsafe] > > +---------------- > > + > > +cpus { > > + cpu@0 { > > + operating-points-v2 = <[OPP list phandle]>; > > + }; > > +}; > > + > > +For an example of an OPP list, see ../power/opp-st.txt. > > I don't think you need this file/patch at all.. It is almost blank and > doesn't define a binding. And so there is no need to specify this at > all. Just an OPP binding file is enough. I have two issues with that. Firstly, although the driver uses the OPP API (it also uses the Regulator and Clock API too), it is fundamentally a CPUFreq driver, so I think it should have a CPUFreq DT entry. Secondly, if someone doesn't know the history of the ST CPUFreq set, they will look here for an accompanying document. I personally wouldn't think to look in power/*opp* for a CPUFreq binding. Perhaps, as all of the CPUFreq drivers use the OPP API, everything should be moved to drivers/base/power or drivers/power?
Cc'ing Rob as well.. On 28-07-15, 08:41, Lee Jones wrote: > I have two issues with that. Firstly, although the driver uses the > OPP API (it also uses the Regulator and Clock API too), it is > fundamentally a CPUFreq driver, so I think it should have a CPUFreq > DT entry. Secondly, if someone doesn't know the history of the > ST CPUFreq set, they will look here for an accompanying document. I > personally wouldn't think to look in power/*opp* for a CPUFreq > binding. > > Perhaps, as all of the CPUFreq drivers use the OPP API, everything > should be moved to drivers/base/power or drivers/power? Okay, looks fine :)
On 27-07-15, 16:20, Lee Jones wrote: > Cc: devicetree@vger.kernel.org > Signed-off-by: Lee Jones <lee.jones@linaro.org> > --- > > Changelog: > - Using OPP-v2 > - Moved (and linked) a bunch of documentation to ../power/ > > .../devicetree/bindings/cpufreq/cpufreq-st.txt | 40 ++++++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt For both patches: Acked-by: Viresh Kumar <viresh.kumar@linaro.org> But I would like Rob to have a look as well :)
On Tue, 28 Jul 2015, Viresh Kumar wrote: > On 27-07-15, 16:20, Lee Jones wrote: > > Cc: devicetree@vger.kernel.org > > Signed-off-by: Lee Jones <lee.jones@linaro.org> > > --- > > > > Changelog: > > - Using OPP-v2 > > - Moved (and linked) a bunch of documentation to ../power/ > > > > .../devicetree/bindings/cpufreq/cpufreq-st.txt | 40 ++++++++++++++++++++++ > > 1 file changed, 40 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt > > For both patches: > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> W00t! I'll start fixing up the driver. > But I would like Rob to have a look as well :) No problem.
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt new file mode 100644 index 0000000..79add9d --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt @@ -0,0 +1,40 @@ +Binding for ST's CPUFreq driver +=============================== + +Frequency Scaling only +---------------------- + +Located in CPU's node: + +- operating-points : [See: ../power/opp.txt] + +Example [safe] +-------------- + +cpus { + cpu@0 { + /* kHz uV */ + operating-points = <1500000 0 + 1200000 0 + 800000 0 + 500000 0>; + }; +}; + +Dynamic Voltage and Frequency Scaling (DVFS) +-------------------------------------------- + +Located in CPU's node: + +- operating-points-v2-sti : [See ../power/opp-st.txt] + +Example [unsafe] +---------------- + +cpus { + cpu@0 { + operating-points-v2 = <[OPP list phandle]>; + }; +}; + +For an example of an OPP list, see ../power/opp-st.txt.
Cc: devicetree@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> --- Changelog: - Using OPP-v2 - Moved (and linked) a bunch of documentation to ../power/ .../devicetree/bindings/cpufreq/cpufreq-st.txt | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt