| Message ID | 1445599528-18825-2-git-send-email-wxt@rock-chips.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Eduardo Valentin |
| Headers | show |
On Fri, Oct 23, 2015 at 6:25 AM, Caesar Wang <wxt@rock-chips.com> wrote: > The "init" pinctrl is defined we'll set > pinctrl to this state before probe and then "default" after probe. > Add the "init" and "sleep" pinctrl as the OTP gpio state, since we need > switch the pin to gpio state before the TSADC controller is reset. > > AFAIK, the TSADC controller is reset, the tshut polarity will be > a *low* signal in a short period of time for some devices. > > Says: > The TSADC get the temperature on rockchip thermal. > > If T(current temperature) < (setting temperature), the OTP output the > *high* signal. > If T(current temperature) > (setting temperature), the OTP output the > *low* Signal. > > In some cases, the OTP pin is connected to the PMIC, maybe the > PMIC can accept the reset response time to avoid this issue. > > In other words, the system will be always reboot if we make the > OTP pin is connected the others IC to control the power. > > Signed-off-by: Caesar Wang <wxt@rock-chips.com> > Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Rob Herring <robh@kernel.org> > --- > > Changes in v4: None > Changes in v3: > - Add the pictrl states decription in document. > > Changes in v2: > - Add the 'init' pinctrl more decription in commit. > - Fix the subject to make more obvious in PATCH[1/2] > - Resend this patch v2 since fix the subject to be specific. > > Changes in v1: > - As the Doug comments, add the 'init' property to sync document. > > .../devicetree/bindings/thermal/rockchip-thermal.txt | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > index ef802de..b38200d 100644 > --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > @@ -12,6 +12,11 @@ Required properties: > - resets : Must contain an entry for each entry in reset-names. > See ../reset/reset.txt for details. > - reset-names : Must include the name "tsadc-apb". > +- pinctrl-names : The pin control state names; > +- pinctrl-0 : The "init" pinctrl state, it will be set before device probe. > +- pinctrl-1 : The "default" pinctrl state, it will be set after reset the > + TSADC controller. > +- pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend. > - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. > - rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value. > - rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO. > @@ -27,8 +32,10 @@ tsadc: tsadc@ff280000 { > clock-names = "tsadc", "apb_pclk"; > resets = <&cru SRST_TSADC>; > reset-names = "tsadc-apb"; > - pinctrl-names = "default"; > - pinctrl-0 = <&otp_out>; > + pinctrl-names = "init", "default", "sleep"; > + pinctrl-0 = <&otp_gpio>; > + pinctrl-1 = <&otp_out>; > + pinctrl-2 = <&otp_gpio>; > #thermal-sensor-cells = <1>; > rockchip,hw-tshut-temp = <95000>; > rockchip,hw-tshut-mode = <0>; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index ef802de..b38200d 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -12,6 +12,11 @@ Required properties: - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the name "tsadc-apb". +- pinctrl-names : The pin control state names; +- pinctrl-0 : The "init" pinctrl state, it will be set before device probe. +- pinctrl-1 : The "default" pinctrl state, it will be set after reset the + TSADC controller. +- pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend. - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. - rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value. - rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO. @@ -27,8 +32,10 @@ tsadc: tsadc@ff280000 { clock-names = "tsadc", "apb_pclk"; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; - pinctrl-names = "default"; - pinctrl-0 = <&otp_out>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; rockchip,hw-tshut-mode = <0>;