From patchwork Thu Apr 14 09:31:49 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rajendra Nayak X-Patchwork-Id: 8833561 X-Patchwork-Delegate: eduardo.valentin@ti.com Return-Path: X-Original-To: patchwork-linux-pm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id C02B4C0553 for ; Thu, 14 Apr 2016 09:43:43 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 2CDA620295 for ; Thu, 14 Apr 2016 09:43:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 154F420166 for ; Thu, 14 Apr 2016 09:43:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752827AbcDNJng (ORCPT ); Thu, 14 Apr 2016 05:43:36 -0400 Received: from smtp.codeaurora.org ([198.145.29.96]:34986 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753755AbcDNJcW (ORCPT ); Thu, 14 Apr 2016 05:32:22 -0400 Received: from smtp.codeaurora.org (localhost [127.0.0.1]) by smtp.codeaurora.org (Postfix) with ESMTP id 00F4560D78; Thu, 14 Apr 2016 09:32:22 +0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1000) id E845E615C7; Thu, 14 Apr 2016 09:32:21 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from blr-ubuntu-34.ap.qualcomm.com (unknown [202.46.23.61]) (using TLSv1.1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: rnayak@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id AB7E460D78; Thu, 14 Apr 2016 09:32:14 +0000 (UTC) From: Rajendra Nayak To: edubezval@gmail.com Cc: andy.gross@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, rui.zhang@intel.com, sboyd@codeaurora.org, nrajan@codeaurora.org, lina.iyer@linaro.org, punit.agrawal@arm.com, Rajendra Nayak Subject: [PATCH v5 01/11] thermal: qcom: tsens: Add a skeletal TSENS drivers Date: Thu, 14 Apr 2016 15:01:49 +0530 Message-Id: <1460626319-14516-2-git-send-email-rnayak@codeaurora.org> X-Mailer: git-send-email 1.8.2.1 In-Reply-To: <1460626319-14516-1-git-send-email-rnayak@codeaurora.org> References: <1460626319-14516-1-git-send-email-rnayak@codeaurora.org> X-Virus-Scanned: ClamAV using ClamSMTP Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP TSENS is Qualcomms' thermal temperature sensor device. It supports reading temperatures from multiple thermal sensors present on various QCOM SoCs. Calibration data is generally read from a non-volatile memory (eeprom) device. Add a skeleton driver with all the necessary abstractions so a variety of qcom device families which support TSENS can add driver extensions. Also add the required device tree bindings which can be used to describe the TSENS device in DT. Signed-off-by: Rajendra Nayak Reviewed-by: Lina Iyer --- .../devicetree/bindings/thermal/qcom-tsens.txt | 21 +++ drivers/thermal/Kconfig | 5 + drivers/thermal/Makefile | 1 + drivers/thermal/qcom/Kconfig | 11 ++ drivers/thermal/qcom/Makefile | 2 + drivers/thermal/qcom/tsens-common.c | 135 ++++++++++++++ drivers/thermal/qcom/tsens.c | 202 +++++++++++++++++++++ drivers/thermal/qcom/tsens.h | 90 +++++++++ 8 files changed, 467 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt create mode 100644 drivers/thermal/qcom/Kconfig create mode 100644 drivers/thermal/qcom/Makefile create mode 100644 drivers/thermal/qcom/tsens-common.c create mode 100644 drivers/thermal/qcom/tsens.c create mode 100644 drivers/thermal/qcom/tsens.h diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt new file mode 100644 index 0000000..292ed89 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -0,0 +1,21 @@ +* QCOM SoC Temperature Sensor (TSENS) + +Required properties: +- compatible : + - "qcom,msm8916-tsens" : For 8916 Family of SoCs + - "qcom,msm8974-tsens" : For 8974 Family of SoCs + - "qcom,msm8996-tsens" : For 8996 Family of SoCs + +- reg: Address range of the thermal registers +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. +- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify +nvmem cells + +Example: +tsens: thermal-sensor@900000 { + compatible = "qcom,msm8916-tsens"; + reg = <0x4a8000 0x2000>; + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "caldata", "calsel"; + #thermal-sensor-cells = <1>; + }; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index c37eedc..463b00c 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -408,4 +408,9 @@ config QCOM_SPMI_TEMP_ALARM real time die temperature if an ADC is present or an estimate of the temperature based upon the over temperature stage value. +menu "Qualcomm thermal drivers" +depends on (ARCH_QCOM && OF) || COMPILE_TEST +source "drivers/thermal/qcom/Kconfig" +endmenu + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 8e9cbc3..3f3e72c 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o obj-$(CONFIG_ST_THERMAL) += st/ +obj-$(CONFIG_QCOM_TSENS) += qcom/ obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig new file mode 100644 index 0000000..be32e5a --- /dev/null +++ b/drivers/thermal/qcom/Kconfig @@ -0,0 +1,11 @@ +config QCOM_TSENS + tristate "Qualcomm TSENS Temperature Alarm" + depends on THERMAL + depends on QCOM_QFPROM + depends on ARCH_QCOM || COMPILE_TEST + help + This enables the thermal sysfs driver for the TSENS device. It shows + up in Sysfs as a thermal zone with multiple trip points. Disabling the + thermal zone device via the mode file results in disabling the sensor. + Also able to set threshold temperature for both hot and cold and update + when a threshold is reached. diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile new file mode 100644 index 0000000..2e800c5 --- /dev/null +++ b/drivers/thermal/qcom/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o +qcom_tsens-y += tsens.o tsens-common.o diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c new file mode 100644 index 0000000..4bffbc1 --- /dev/null +++ b/drivers/thermal/qcom/tsens-common.c @@ -0,0 +1,135 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include "tsens.h" + +#define S0_ST_ADDR 0x1030 +#define SN_ADDR_OFFSET 0x4 +#define SN_ST_TEMP_MASK 0x3ff +#define CAL_DEGC_PT1 30 +#define CAL_DEGC_PT2 120 +#define SLOPE_FACTOR 1000 +#define SLOPE_DEFAULT 3200 + +char *qfprom_read(struct device *dev, const char *cname) +{ + struct nvmem_cell *cell; + ssize_t data; + char *ret; + + cell = nvmem_cell_get(dev, cname); + if (IS_ERR(cell)) + return ERR_CAST(cell); + + ret = nvmem_cell_read(cell, &data); + nvmem_cell_put(cell); + + return ret; +} + +void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1, + u32 *p2, u32 mode) +{ + int i; + int num, den; + + for (i = 0; i < tmdev->num_sensors; i++) { + dev_dbg(tmdev->dev, + "sensor%d - data_point1:%#x data_point2:%#x\n", + i, p1[i], p2[i]); + + tmdev->sensor[i].slope = SLOPE_DEFAULT; + if (mode == TWO_PT_CALIB) { + /* + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ + * temp_120_degc - temp_30_degc (x2 - x1) + */ + num = p2[i] - p1[i]; + num *= SLOPE_FACTOR; + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; + tmdev->sensor[i].slope = num / den; + } + + tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - + (CAL_DEGC_PT1 * + tmdev->sensor[i].slope); + dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset); + } +} + +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) +{ + int degc, num, den; + + num = (adc_code * SLOPE_FACTOR) - s->offset; + den = s->slope; + + if (num > 0) + degc = num + (den / 2); + else if (num < 0) + degc = num - (den / 2); + else + degc = num; + + degc /= den; + + return degc; +} + +int get_temp_common(struct tsens_device *tmdev, int id, int *temp) +{ + struct tsens_sensor *s = &tmdev->sensor[id]; + u32 code; + unsigned int sensor_addr; + int last_temp = 0, ret; + + sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET; + ret = regmap_read(tmdev->map, sensor_addr, &code); + if (ret) + return ret; + last_temp = code & SN_ST_TEMP_MASK; + + *temp = code_to_degc(last_temp, s) * 1000; + + return 0; +} + +static const struct regmap_config tsens_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +int __init init_common(struct tsens_device *tmdev) +{ + void __iomem *base; + + base = of_iomap(tmdev->dev->of_node, 0); + if (IS_ERR(base)) + return -EINVAL; + + tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config); + if (!tmdev->map) { + iounmap(base); + return -ENODEV; + } + + return 0; +} diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c new file mode 100644 index 0000000..e799182 --- /dev/null +++ b/drivers/thermal/qcom/tsens.c @@ -0,0 +1,202 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include "tsens.h" + +static int tsens_get_temp(void *data, int *temp) +{ + const struct tsens_sensor *s = data; + struct tsens_device *tmdev = s->tmdev; + + return tmdev->ops->get_temp(tmdev, s->id, temp); +} + +static int tsens_get_trend(void *data, long *temp) +{ + const struct tsens_sensor *s = data; + struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops->get_trend) + return tmdev->ops->get_trend(tmdev, s->id, temp); + + return -ENOTSUPP; +} + +static int tsens_suspend(struct device *dev) +{ + struct tsens_device *tmdev = dev_get_drvdata(dev); + + if (tmdev->ops && tmdev->ops->suspend) + return tmdev->ops->suspend(tmdev); + + return 0; +} + +static int tsens_resume(struct device *dev) +{ + struct tsens_device *tmdev = dev_get_drvdata(dev); + + if (tmdev->ops && tmdev->ops->resume) + return tmdev->ops->resume(tmdev); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); + +static const struct of_device_id tsens_table[] = { + { + .compatible = "qcom,msm8916-tsens", + }, { + .compatible = "qcom,msm8974-tsens", + }, + {} +}; +MODULE_DEVICE_TABLE(of, tsens_table); + +static const struct thermal_zone_of_device_ops tsens_of_ops = { + .get_temp = tsens_get_temp, + .get_trend = tsens_get_trend, +}; + +static int tsens_register(struct tsens_device *tmdev) +{ + int i; + struct thermal_zone_device *tzd; + u32 *hw_id, n = tmdev->num_sensors; + + hw_id = devm_kcalloc(tmdev->dev, n, sizeof(u32), GFP_KERNEL); + if (!hw_id) + return -ENOMEM; + + for (i = 0; i < tmdev->num_sensors; i++) { + tmdev->sensor[i].tmdev = tmdev; + tmdev->sensor[i].id = i; + tzd = thermal_zone_of_sensor_register(tmdev->dev, i, + &tmdev->sensor[i], + &tsens_of_ops); + if (IS_ERR(tzd)) + continue; + tmdev->sensor[i].tzd = tzd; + if (tmdev->ops->enable) + tmdev->ops->enable(tmdev, i); + } + return 0; +} + +static int tsens_probe(struct platform_device *pdev) +{ + int ret, i; + struct device *dev; + struct device_node *np; + struct tsens_sensor *s; + struct tsens_device *tmdev; + const struct tsens_data *data; + const struct of_device_id *id; + + if (pdev->dev.of_node) + dev = &pdev->dev; + else + dev = pdev->dev.parent; + + np = dev->of_node; + + id = of_match_node(tsens_table, np); + if (!id) + return -EINVAL; + + data = id->data; + + if (data->num_sensors <= 0) { + dev_err(dev, "invalid number of sensors\n"); + return -EINVAL; + } + + tmdev = devm_kzalloc(dev, sizeof(*tmdev) + + data->num_sensors * sizeof(*s), GFP_KERNEL); + if (!tmdev) + return -ENOMEM; + + tmdev->dev = dev; + tmdev->num_sensors = data->num_sensors; + tmdev->ops = data->ops; + for (i = 0; i < tmdev->num_sensors; i++) { + if (data->hw_ids) + tmdev->sensor[i].hw_id = data->hw_ids[i]; + else + tmdev->sensor[i].hw_id = i; + } + + if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->get_temp) + return -EINVAL; + + ret = tmdev->ops->init(tmdev); + if (ret < 0) { + dev_err(dev, "tsens init failed\n"); + return ret; + } + + if (tmdev->ops->calibrate) { + ret = tmdev->ops->calibrate(tmdev); + if (ret < 0) { + dev_err(dev, "tsens calibration failed\n"); + return ret; + } + } + + ret = tsens_register(tmdev); + + platform_set_drvdata(pdev, tmdev); + + return ret; +} + +static int tsens_remove(struct platform_device *pdev) +{ + int i; + struct tsens_device *tmdev = platform_get_drvdata(pdev); + struct thermal_zone_device *tzd; + + if (tmdev->ops->disable) + tmdev->ops->disable(tmdev); + + for (i = 0; i < tmdev->num_sensors; i++) { + tzd = tmdev->sensor[i].tzd; + thermal_zone_of_sensor_unregister(&pdev->dev, tzd); + } + + return 0; +} + +static struct platform_driver tsens_driver = { + .probe = tsens_probe, + .remove = tsens_remove, + .driver = { + .name = "qcom-tsens", + .pm = &tsens_pm_ops, + .of_match_table = tsens_table, + }, +}; +module_platform_driver(tsens_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("QCOM Temperature Sensor driver"); +MODULE_ALIAS("platform:qcom-tsens"); diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h new file mode 100644 index 0000000..6f652ed --- /dev/null +++ b/drivers/thermal/qcom/tsens.h @@ -0,0 +1,90 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_TSENS_H__ +#define __QCOM_TSENS_H__ + +#define ONE_PT_CALIB 0x1 +#define ONE_PT_CALIB2 0x2 +#define TWO_PT_CALIB 0x3 + +struct tsens_device; + +struct tsens_sensor { + struct tsens_device *tmdev; + struct thermal_zone_device *tzd; + int offset; + int id; + int hw_id; + u32 slope; + u32 status; +}; + +/** + * struct tsens_ops - operations as supported by the tsens device + * @init: Function to initialize the tsens device + * @calibrate: Function to calibrate the tsens device + * @get_temp: Function which returns the temp in millidegC + * @enable: Function to enable (clocks/power) tsens device + * @disable: Function to disable the tsens device + * @suspend: Function to suspend the tsens device + * @resume: Function to resume the tsens device + * @get_trend: Function to get the thermal/temp trend + */ +struct tsens_ops { + /* mandatory callbacks */ + int (*init)(struct tsens_device *); + int (*calibrate)(struct tsens_device *); + int (*get_temp)(struct tsens_device *, int, int *); + /* optional callbacks */ + int (*enable)(struct tsens_device *, int); + void (*disable)(struct tsens_device *); + int (*suspend)(struct tsens_device *); + int (*resume)(struct tsens_device *); + int (*get_trend)(struct tsens_device *, int, long *); +}; + +/** + * struct tsens_data - tsens instance specific data + * @num_sensors: Max number of sensors supported by platform + * @ops: operations the tsens instance supports + * @hw_ids: Subset of sensors ids supported by platform, if not the first n + */ +struct tsens_data { + const u32 num_sensors; + const struct tsens_ops *ops; + unsigned int *hw_ids; +}; + +/* Registers to be saved/restored across a context loss */ +struct tsens_context { + int threshold; + int control; +}; + +struct tsens_device { + struct device *dev; + u32 num_sensors; + struct regmap *map; + struct regmap_field *status_field; + struct tsens_context ctx; + bool trdy; + const struct tsens_ops *ops; + struct tsens_sensor sensor[0]; +}; + +char *qfprom_read(struct device *, const char *); +void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32); +int init_common(struct tsens_device *); +int get_temp_common(struct tsens_device *, int, int *); + +#endif /* __QCOM_TSENS_H__ */