@@ -338,31 +338,9 @@ config INTEL_QUARK_DTS_THERMAL
hot & critical. The critical trip point default value is set by
underlying BIOS/Firmware.
-config INT340X_THERMAL
- tristate "ACPI INT340X thermal drivers"
- depends on X86 && ACPI
- select THERMAL_GOV_USER_SPACE
- select ACPI_THERMAL_REL
- select ACPI_FAN
- select INTEL_SOC_DTS_IOSF_CORE
- select THERMAL_WRITABLE_TRIPS
- help
- Newer laptops and tablets that use ACPI may have thermal sensors and
- other devices with thermal control capabilities outside the core
- CPU/SOC, for thermal safety reasons.
- They are exposed for the OS to use via the INT3400 ACPI device object
- as the master, and INT3401~INT340B ACPI device objects as the slaves.
- Enable this to expose the temperature information and cooling ability
- from these objects to userspace via the normal thermal framework.
- This means that a wide range of applications and GUI widgets can show
- the information to the user or use this information for making
- decisions. For example, the Intel Thermal Daemon can use this
- information to allow the user to select his laptop to run without
- turning on the fans.
-
-config ACPI_THERMAL_REL
- tristate
- depends on ACPI
+menu "ACPI INT340X thermal drivers"
+source drivers/thermal/int340x_thermal/Kconfig
+endmenu
config INTEL_PCH_THERMAL
tristate "Intel PCH Thermal Reporting Driver"
new file mode 100644
@@ -0,0 +1,42 @@
+#
+# ACPI INT340x thermal drivers configuration
+#
+
+config INT340X_THERMAL
+ tristate "ACPI INT340X thermal drivers"
+ depends on X86 && ACPI
+ select THERMAL_GOV_USER_SPACE
+ select ACPI_THERMAL_REL
+ select ACPI_FAN
+ select INTEL_SOC_DTS_IOSF_CORE
+ help
+ Newer laptops and tablets that use ACPI may have thermal sensors and
+ other devices with thermal control capabilities outside the core
+ CPU/SOC, for thermal safety reasons.
+ They are exposed for the OS to use via the INT3400 ACPI device object
+ as the master, and INT3401~INT340B ACPI device objects as the slaves.
+ Enable this to expose the temperature information and cooling ability
+ from these objects to userspace via the normal thermal framework.
+ This means that a wide range of applications and GUI widgets can show
+ the information to the user or use this information for making
+ decisions. For example, the Intel Thermal Daemon can use this
+ information to allow the user to select his laptop to run without
+ turning on the fans.
+
+config ACPI_THERMAL_REL
+ tristate
+ depends on ACPI
+
+if INT340X_THERMAL
+
+config INT3406_THERMAL
+ tristate "ACPI INT3406 display thermal driver"
+ depends on ACPI_VIDEO
+ help
+ The display thermal device represents the LED/LCD display panel
+ that may or may not include touch support. The main function of
+ the display thermal device is to allow control of the display
+ brightness in order to address a thermal condition or to reduce
+ power consumed by display device.
+
+endif
@@ -3,4 +3,5 @@ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal_zone.o
obj-$(CONFIG_INT340X_THERMAL) += int3402_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += int3403_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_device.o
+obj-$(CONFIG_INT3406_THERMAL) += int3406_thermal.o
obj-$(CONFIG_ACPI_THERMAL_REL) += acpi_thermal_rel.o
new file mode 100644
@@ -0,0 +1,236 @@
+/*
+ * INT3406 thermal driver for display participant device
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Aaron Lu <aaron.lu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/backlight.h>
+#include <linux/thermal.h>
+#include <acpi/video.h>
+
+#define INT3406_BRIGHTNESS_LIMITS_CHANGED 0x80
+
+struct int3406_thermal_data {
+ int upper_limit;
+ int upper_limit_index;
+ int lower_limit;
+ int lower_limit_index;
+ acpi_handle handle;
+ struct acpi_video_device_brightness *br;
+ struct backlight_device *raw_bd;
+ struct thermal_cooling_device *cooling_dev;
+};
+
+static int int3406_thermal_to_raw(int level, struct int3406_thermal_data *d)
+{
+ int max_level = d->br->levels[d->br->count - 1];
+ int raw_max = d->raw_bd->props.max_brightness;
+
+ return level * raw_max / max_level;
+}
+
+static int int3406_thermal_to_acpi(int level, struct int3406_thermal_data *d)
+{
+ int raw_max = d->raw_bd->props.max_brightness;
+ int max_level = d->br->levels[d->br->count - 1];
+
+ return level * max_level / raw_max;
+}
+
+static int
+int3406_thermal_get_max_state(struct thermal_cooling_device *cooling_dev,
+ unsigned long *state)
+{
+ struct int3406_thermal_data *d = cooling_dev->devdata;
+ int index = d->lower_limit_index ? d->lower_limit_index : 2;
+
+ *state = d->br->count - 1 - index;
+ return 0;
+}
+
+static int
+int3406_thermal_set_cur_state(struct thermal_cooling_device *cooling_dev,
+ unsigned long state)
+{
+ struct int3406_thermal_data *d = cooling_dev->devdata;
+ int level, raw_level;
+
+ if (state > d->br->count - 3)
+ return -EINVAL;
+
+ state = d->br->count - 1 - state;
+ level = d->br->levels[state];
+
+ if ((d->upper_limit && level > d->upper_limit) ||
+ (d->lower_limit && level < d->lower_limit))
+ return -EINVAL;
+
+ raw_level = int3406_thermal_to_raw(level, d);
+ return backlight_device_set_brightness(d->raw_bd, raw_level);
+}
+
+static int
+int3406_thermal_get_cur_state(struct thermal_cooling_device *cooling_dev,
+ unsigned long *state)
+{
+ struct int3406_thermal_data *d = cooling_dev->devdata;
+ int raw_level, level, i;
+ int *levels = d->br->levels;
+
+ raw_level = d->raw_bd->props.brightness;
+ level = int3406_thermal_to_acpi(raw_level, d);
+
+ /*
+ * There is no 1:1 mapping between the firmware interface level with the
+ * raw interface level, we will have to find one that is close enough.
+ */
+ for (i = 2; i < d->br->count; i++) {
+ if (level < levels[i]) {
+ if (i == 2)
+ break;
+ if ((level - levels[i - 1]) < (levels[i] - level))
+ i--;
+ break;
+ }
+ }
+
+ *state = d->br->count - 1 - i;
+ return 0;
+}
+
+static const struct thermal_cooling_device_ops video_cooling_ops = {
+ .get_max_state = int3406_thermal_get_max_state,
+ .get_cur_state = int3406_thermal_get_cur_state,
+ .set_cur_state = int3406_thermal_set_cur_state,
+};
+
+static int int3406_thermal_get_index(int *array, int nr, int value)
+{
+ int i;
+
+ for (i = 0; i < nr; i++) {
+ if (array[i] == value)
+ break;
+ }
+ return i == nr ? -ENOENT : i;
+}
+
+static void int3406_thermal_get_limit(struct int3406_thermal_data *d)
+{
+ acpi_status status;
+ unsigned long long lower_limit, upper_limit;
+ int index;
+
+ status = acpi_evaluate_integer(d->handle, "DDDL", NULL, &lower_limit);
+ if (ACPI_SUCCESS(status)) {
+ index = int3406_thermal_get_index(d->br->levels, d->br->count,
+ lower_limit);
+ if (index > 0) {
+ d->lower_limit = (int)lower_limit;
+ d->lower_limit_index = index;
+ }
+ }
+
+ status = acpi_evaluate_integer(d->handle, "DDPC", NULL, &upper_limit);
+ if (ACPI_SUCCESS(status)) {
+ index = int3406_thermal_get_index(d->br->levels, d->br->count,
+ upper_limit);
+ if (index > 0) {
+ d->upper_limit = (int)upper_limit;
+ d->upper_limit_index = index;
+ }
+ }
+}
+
+static void int3406_notify(acpi_handle handle, u32 event, void *data)
+{
+ if (event == INT3406_BRIGHTNESS_LIMITS_CHANGED)
+ int3406_thermal_get_limit(data);
+}
+
+static int int3406_thermal_probe(struct platform_device *pdev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+ struct int3406_thermal_data *d;
+ struct backlight_device *bd;
+ int ret;
+
+ if (!ACPI_HANDLE(&pdev->dev))
+ return -ENODEV;
+
+ d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+ d->handle = ACPI_HANDLE(&pdev->dev);
+
+ bd = backlight_device_get_by_type(BACKLIGHT_RAW);
+ if (!bd)
+ return -ENODEV;
+ d->raw_bd = bd;
+
+ ret = acpi_video_get_levels(ACPI_COMPANION(&pdev->dev), &d->br);
+ if (ret)
+ return ret;
+
+ int3406_thermal_get_limit(d);
+
+ d->cooling_dev = thermal_cooling_device_register(acpi_device_bid(adev),
+ d, &video_cooling_ops);
+ if (IS_ERR(d->cooling_dev))
+ goto err;
+
+ ret = acpi_install_notify_handler(adev->handle, ACPI_DEVICE_NOTIFY,
+ int3406_notify, d);
+ if (ret)
+ goto err_cdev;
+
+ platform_set_drvdata(pdev, d);
+
+ return 0;
+
+err_cdev:
+ thermal_cooling_device_unregister(d->cooling_dev);
+err:
+ kfree(d->br);
+ return -ENODEV;
+}
+
+static int int3406_thermal_remove(struct platform_device *pdev)
+{
+ struct int3406_thermal_data *d = platform_get_drvdata(pdev);
+
+ thermal_cooling_device_unregister(d->cooling_dev);
+ kfree(d->br);
+ return 0;
+}
+
+static const struct acpi_device_id int3406_thermal_match[] = {
+ {"INT3406", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(acpi, int3406_thermal_match);
+
+static struct platform_driver int3406_thermal_driver = {
+ .probe = int3406_thermal_probe,
+ .remove = int3406_thermal_remove,
+ .driver = {
+ .name = "int3406 thermal",
+ .owner = THIS_MODULE,
+ .acpi_match_table = int3406_thermal_match,
+ },
+};
+
+module_platform_driver(int3406_thermal_driver);
+
+MODULE_DESCRIPTION("INT3406 Thermal driver");
+MODULE_LICENSE("GPL");
INT3406 ACPI device object resembles an ACPI video output device, but its _BCM is said to be deprecated and should not be used. So we will make use of the raw interface to do the actual cooling. Signed-off-by: Aaron Lu <aaron.lu@intel.com> --- drivers/thermal/Kconfig | 28 +-- drivers/thermal/int340x_thermal/Kconfig | 42 ++++ drivers/thermal/int340x_thermal/Makefile | 1 + drivers/thermal/int340x_thermal/int3406_thermal.c | 236 ++++++++++++++++++++++ 4 files changed, 282 insertions(+), 25 deletions(-) create mode 100644 drivers/thermal/int340x_thermal/Kconfig create mode 100644 drivers/thermal/int340x_thermal/int3406_thermal.c