| Message ID | 1463063738-11506-2-git-send-email-kernel@martin.sperl.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
kernel@martin.sperl.org writes: > From: Martin Sperl <kernel@martin.sperl.org> > > Add documentation for bcm2835 SOC thermal sensor. > > Signed-off-by: Martin Sperl <kernel@martin.sperl.org> > --- > .../devicetree/bindings/thermal/bcm2835-thermal.txt | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt > > diff --git a/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt > new file mode 100644 > index 0000000..607519a > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt There's a naming convention for the BCM DT bindings these days where you basically name it after the compatible string, so this file should be moved to "brcm,bcm2835-thermal.txt" (yes, even though it's inconsistent with the rest of the files in the directory). > @@ -0,0 +1,16 @@ > +Binding for Thermal Sensor driver for BCM2835 SoCs. > + > +Required parameters: > +------------------- > + > +compatible : should be: "brcm,bcm2835-thermal" Optional: change to 'should be: "brcm,bcm2835-thermal" or "brcm,bcm2837-thermal"' (see next review for explanation). I would also drop the space before the colons on the parameters, but as long as the filename is changed this patch is: Acked-by: Eric Anholt <eric@anholt.net> > +reg : Address range of the thermal registers. > +clocks : Phandle of the clock used by the thermal sensor. > + > +Example: > + > +thermal: thermal@0x7e212000 { > + compatible = "brcm,bcm2835-thermal"; > + reg = <0x7e212000 0x8>; > + clocks = <&clocks BCM2835_CLOCK_TSENS>; > +}; > -- > 2.1.4
diff --git a/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt new file mode 100644 index 0000000..607519a --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt @@ -0,0 +1,16 @@ +Binding for Thermal Sensor driver for BCM2835 SoCs. + +Required parameters: +------------------- + +compatible : should be: "brcm,bcm2835-thermal" +reg : Address range of the thermal registers. +clocks : Phandle of the clock used by the thermal sensor. + +Example: + +thermal: thermal@0x7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; +};