| Message ID | 1463634020-17252-2-git-send-email-andy.gross@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
+ Daniel On 19 May 2016 at 07:00, Andy Gross <andy.gross@linaro.org> wrote: > This patch adds suspend to idle support for Qualcomm processors. While > suspend to memory will be a valid state, there won't be any special > handling or power savings over the suspend to idle. > > Signed-off-by: Andy Gross <andy.gross@linaro.org> > --- > drivers/soc/qcom/Makefile | 1 + > drivers/soc/qcom/suspend.c | 77 ++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 78 insertions(+) > create mode 100644 drivers/soc/qcom/suspend.c > > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile > index fdd664e..7c479d3 100644 > --- a/drivers/soc/qcom/Makefile > +++ b/drivers/soc/qcom/Makefile > @@ -7,3 +7,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o > obj-$(CONFIG_QCOM_SMP2P) += smp2p.o > obj-$(CONFIG_QCOM_SMSM) += smsm.o > obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o > +obj-$(CONFIG_SUSPEND) += suspend.o > diff --git a/drivers/soc/qcom/suspend.c b/drivers/soc/qcom/suspend.c > new file mode 100644 > index 0000000..7d3f2dd > --- /dev/null > +++ b/drivers/soc/qcom/suspend.c > @@ -0,0 +1,77 @@ > +/* > + * (C) Copyright 2016 Linaro Ltd. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; version 2 > + * of the License. > + */ > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/cpuidle.h> > +#include <linux/suspend.h> > + > + > +static void qcom_pm_enter_freeze(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, > + int index) > +{ > + drv->states[index].enter(dev, drv, index); > +} > + > +static const struct of_device_id qcom_idle_state_match[] = { > + { .compatible = "qcom,idle-state-spc", }, > + { }, > +}; > + > +static const struct platform_suspend_ops qcom_suspend_ops = { > + .valid = suspend_valid_only_mem, > +}; > + > +static int __init qcom_pm_init(void) > +{ > + struct cpuidle_device *cpu_dev; > + struct cpuidle_driver *cpu_drv; > + int state_count; > + struct device_node *state_np, *cpu_np; > + const struct of_device_id *match; > + int i; > + > + /* configure CPU enter_freeze if applicable */ > + for_each_present_cpu(i) { > + cpu_np = of_get_cpu_node(i, NULL); > + cpu_dev = per_cpu_ptr(cpuidle_devices, i); > + cpu_drv = cpuidle_get_cpu_driver(cpu_dev); > + > + if (!cpu_dev || !cpu_drv) { > + of_node_put(cpu_np); > + return -EPROBE_DEFER; This isn't a driver, so returning -EPROBE_DEFER doesn't make sense. > + } > + > + state_count = 0; > + state_np = of_parse_phandle(cpu_np, "cpu-idle-states", > + state_count); > + > + while (state_np) { > + match = of_match_node(qcom_idle_state_match, > + state_np); > + > + state_count++; > + if (match) > + cpu_drv->states[state_count].enter_freeze = > + &qcom_pm_enter_freeze; > + of_node_put(state_np); > + > + state_np = of_parse_phandle(cpu_np, "cpu-idle-states", > + state_count); > + } > + > + of_node_put(cpu_np); > + } > + > + suspend_set_ops(&qcom_suspend_ops); I don't think this will work! When building a multi defconfig for ARM, you might overwrite the suspend_ops (there's only one set) as here you don't know that it's actually the QCOM platform that is running, right!? Perhaps this code actually belongs closer to the cpuidle driver? > + > + return 0; > +} > + > +late_initcall(qcom_pm_init); > -- > 1.9.1 Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 09, 2016 at 09:39:34AM +0200, Ulf Hansson wrote: > + Daniel > > On 19 May 2016 at 07:00, Andy Gross <andy.gross@linaro.org> wrote: > > This patch adds suspend to idle support for Qualcomm processors. While > > suspend to memory will be a valid state, there won't be any special > > handling or power savings over the suspend to idle. > > > > Signed-off-by: Andy Gross <andy.gross@linaro.org> > > --- > > drivers/soc/qcom/Makefile | 1 + > > drivers/soc/qcom/suspend.c | 77 ++++++++++++++++++++++++++++++++++++++++++++++ > > 2 files changed, 78 insertions(+) > > create mode 100644 drivers/soc/qcom/suspend.c > > > > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile > > index fdd664e..7c479d3 100644 > > --- a/drivers/soc/qcom/Makefile > > +++ b/drivers/soc/qcom/Makefile > > @@ -7,3 +7,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o > > obj-$(CONFIG_QCOM_SMP2P) += smp2p.o > > obj-$(CONFIG_QCOM_SMSM) += smsm.o > > obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o > > +obj-$(CONFIG_SUSPEND) += suspend.o > > diff --git a/drivers/soc/qcom/suspend.c b/drivers/soc/qcom/suspend.c > > new file mode 100644 > > index 0000000..7d3f2dd > > --- /dev/null > > +++ b/drivers/soc/qcom/suspend.c > > @@ -0,0 +1,77 @@ > > +/* > > + * (C) Copyright 2016 Linaro Ltd. > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License > > + * as published by the Free Software Foundation; version 2 > > + * of the License. > > + */ > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/cpuidle.h> > > +#include <linux/suspend.h> > > + > > + > > +static void qcom_pm_enter_freeze(struct cpuidle_device *dev, > > + struct cpuidle_driver *drv, > > + int index) > > +{ > > + drv->states[index].enter(dev, drv, index); > > +} > > + > > +static const struct of_device_id qcom_idle_state_match[] = { > > + { .compatible = "qcom,idle-state-spc", }, > > + { }, > > +}; > > + > > +static const struct platform_suspend_ops qcom_suspend_ops = { > > + .valid = suspend_valid_only_mem, > > +}; > > + > > +static int __init qcom_pm_init(void) > > +{ > > + struct cpuidle_device *cpu_dev; > > + struct cpuidle_driver *cpu_drv; > > + int state_count; > > + struct device_node *state_np, *cpu_np; > > + const struct of_device_id *match; > > + int i; > > + > > + /* configure CPU enter_freeze if applicable */ > > + for_each_present_cpu(i) { > > + cpu_np = of_get_cpu_node(i, NULL); > > + cpu_dev = per_cpu_ptr(cpuidle_devices, i); > > + cpu_drv = cpuidle_get_cpu_driver(cpu_dev); > > + > > + if (!cpu_dev || !cpu_drv) { > > + of_node_put(cpu_np); > > + return -EPROBE_DEFER; > > This isn't a driver, so returning -EPROBE_DEFER doesn't make sense. Right. It's not like it'll get retried. > > + } > > + > > + state_count = 0; > > + state_np = of_parse_phandle(cpu_np, "cpu-idle-states", > > + state_count); > > + > > + while (state_np) { > > + match = of_match_node(qcom_idle_state_match, > > + state_np); > > + > > + state_count++; > > + if (match) > > + cpu_drv->states[state_count].enter_freeze = > > + &qcom_pm_enter_freeze; > > + of_node_put(state_np); > > + > > + state_np = of_parse_phandle(cpu_np, "cpu-idle-states", > > + state_count); > > + } > > + > > + of_node_put(cpu_np); > > + } > > + > > + suspend_set_ops(&qcom_suspend_ops); > > I don't think this will work! > > When building a multi defconfig for ARM, you might overwrite the > suspend_ops (there's only one set) as here you don't know that it's > actually the QCOM platform that is running, right!? > > Perhaps this code actually belongs closer to the cpuidle driver? Hmmmm, I might have to get creative. I originally had a DT entry for the pm, but that doesn't make sense as this is purely a software construct. The db410c uses the arm cpuidle driver so I can't really hook it in there. I'll have to come up with something else. Andy -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 9 June 2016 at 20:09, Andy Gross <andy.gross@linaro.org> wrote: > On Thu, Jun 09, 2016 at 09:39:34AM +0200, Ulf Hansson wrote: >> + Daniel >> >> On 19 May 2016 at 07:00, Andy Gross <andy.gross@linaro.org> wrote: >> > This patch adds suspend to idle support for Qualcomm processors. While >> > suspend to memory will be a valid state, there won't be any special >> > handling or power savings over the suspend to idle. >> > >> > Signed-off-by: Andy Gross <andy.gross@linaro.org> >> > --- >> > drivers/soc/qcom/Makefile | 1 + >> > drivers/soc/qcom/suspend.c | 77 ++++++++++++++++++++++++++++++++++++++++++++++ >> > 2 files changed, 78 insertions(+) >> > create mode 100644 drivers/soc/qcom/suspend.c >> > >> > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile >> > index fdd664e..7c479d3 100644 >> > --- a/drivers/soc/qcom/Makefile >> > +++ b/drivers/soc/qcom/Makefile >> > @@ -7,3 +7,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o >> > obj-$(CONFIG_QCOM_SMP2P) += smp2p.o >> > obj-$(CONFIG_QCOM_SMSM) += smsm.o >> > obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o >> > +obj-$(CONFIG_SUSPEND) += suspend.o >> > diff --git a/drivers/soc/qcom/suspend.c b/drivers/soc/qcom/suspend.c >> > new file mode 100644 >> > index 0000000..7d3f2dd >> > --- /dev/null >> > +++ b/drivers/soc/qcom/suspend.c >> > @@ -0,0 +1,77 @@ >> > +/* >> > + * (C) Copyright 2016 Linaro Ltd. >> > + * >> > + * This program is free software; you can redistribute it and/or >> > + * modify it under the terms of the GNU General Public License >> > + * as published by the Free Software Foundation; version 2 >> > + * of the License. >> > + */ >> > +#include <linux/module.h> >> > +#include <linux/of.h> >> > +#include <linux/cpuidle.h> >> > +#include <linux/suspend.h> >> > + >> > + >> > +static void qcom_pm_enter_freeze(struct cpuidle_device *dev, >> > + struct cpuidle_driver *drv, >> > + int index) >> > +{ >> > + drv->states[index].enter(dev, drv, index); >> > +} >> > + >> > +static const struct of_device_id qcom_idle_state_match[] = { >> > + { .compatible = "qcom,idle-state-spc", }, >> > + { }, >> > +}; >> > + >> > +static const struct platform_suspend_ops qcom_suspend_ops = { >> > + .valid = suspend_valid_only_mem, >> > +}; >> > + >> > +static int __init qcom_pm_init(void) >> > +{ >> > + struct cpuidle_device *cpu_dev; >> > + struct cpuidle_driver *cpu_drv; >> > + int state_count; >> > + struct device_node *state_np, *cpu_np; >> > + const struct of_device_id *match; >> > + int i; >> > + >> > + /* configure CPU enter_freeze if applicable */ >> > + for_each_present_cpu(i) { >> > + cpu_np = of_get_cpu_node(i, NULL); >> > + cpu_dev = per_cpu_ptr(cpuidle_devices, i); >> > + cpu_drv = cpuidle_get_cpu_driver(cpu_dev); >> > + >> > + if (!cpu_dev || !cpu_drv) { >> > + of_node_put(cpu_np); >> > + return -EPROBE_DEFER; >> >> This isn't a driver, so returning -EPROBE_DEFER doesn't make sense. > > Right. It's not like it'll get retried. > >> > + } >> > + >> > + state_count = 0; >> > + state_np = of_parse_phandle(cpu_np, "cpu-idle-states", >> > + state_count); >> > + >> > + while (state_np) { >> > + match = of_match_node(qcom_idle_state_match, >> > + state_np); >> > + >> > + state_count++; >> > + if (match) >> > + cpu_drv->states[state_count].enter_freeze = >> > + &qcom_pm_enter_freeze; >> > + of_node_put(state_np); >> > + >> > + state_np = of_parse_phandle(cpu_np, "cpu-idle-states", >> > + state_count); >> > + } >> > + >> > + of_node_put(cpu_np); >> > + } >> > + >> > + suspend_set_ops(&qcom_suspend_ops); >> >> I don't think this will work! >> >> When building a multi defconfig for ARM, you might overwrite the >> suspend_ops (there's only one set) as here you don't know that it's >> actually the QCOM platform that is running, right!? >> >> Perhaps this code actually belongs closer to the cpuidle driver? > > Hmmmm, I might have to get creative. I originally had a DT entry for the pm, > but that doesn't make sense as this is purely a software construct. The db410c > uses the arm cpuidle driver so I can't really hook it in there. I'll have to > come up with something else. I did a little research. I think you should be able to use the struct cpuidle_ops->init() callback. This is being invoked when the arm cpuidle driver is initialized. arm_idle_init() ->arm_cpuidle_init() ->cpuidle_ops->init() In the QCOM case, it's the spm driver that registers these cpuidle_ops (drivers/soc/qcom/spm.c). If you fold in the code from $subject patch in qcom_cpuidle_init(), that should work I think. Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 10, 2016 at 10:47:35AM +0200, Ulf Hansson wrote: <snip> > >> > >> I don't think this will work! > >> > >> When building a multi defconfig for ARM, you might overwrite the > >> suspend_ops (there's only one set) as here you don't know that it's > >> actually the QCOM platform that is running, right!? > >> > >> Perhaps this code actually belongs closer to the cpuidle driver? > > > > Hmmmm, I might have to get creative. I originally had a DT entry for the pm, > > but that doesn't make sense as this is purely a software construct. The db410c > > uses the arm cpuidle driver so I can't really hook it in there. I'll have to > > come up with something else. > > I did a little research. > > I think you should be able to use the struct cpuidle_ops->init() > callback. This is being invoked when the arm cpuidle driver is > initialized. > > arm_idle_init() > ->arm_cpuidle_init() > ->cpuidle_ops->init() Ah I'll see if I can get that to work. Thanks for the pointer. > > In the QCOM case, it's the spm driver that registers these cpuidle_ops > (drivers/soc/qcom/spm.c). If you fold in the code from $subject patch > in qcom_cpuidle_init(), that should work I think. Only for the 32 bit processor case. The SPM is not used for the 64 bit procs. Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 09, 2016 at 01:09:02PM -0500, Andy Gross wrote: > On Thu, Jun 09, 2016 at 09:39:34AM +0200, Ulf Hansson wrote: > > + Daniel > > > > On 19 May 2016 at 07:00, Andy Gross <andy.gross@linaro.org> wrote: [ ... ] > > I don't think this will work! > > > > When building a multi defconfig for ARM, you might overwrite the > > suspend_ops (there's only one set) as here you don't know that it's > > actually the QCOM platform that is running, right!? > > > > Perhaps this code actually belongs closer to the cpuidle driver? > > Hmmmm, I might have to get creative. I originally had a DT entry for the pm, > but that doesn't make sense as this is purely a software construct. The db410c > uses the arm cpuidle driver so I can't really hook it in there. I'll have to > come up with something else. IMO, the generic ARM driver should be revisited to add support for suspend to idle. -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index fdd664e..7c479d3 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o obj-$(CONFIG_QCOM_SMP2P) += smp2p.o obj-$(CONFIG_QCOM_SMSM) += smsm.o obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o +obj-$(CONFIG_SUSPEND) += suspend.o diff --git a/drivers/soc/qcom/suspend.c b/drivers/soc/qcom/suspend.c new file mode 100644 index 0000000..7d3f2dd --- /dev/null +++ b/drivers/soc/qcom/suspend.c @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2016 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#include <linux/module.h> +#include <linux/of.h> +#include <linux/cpuidle.h> +#include <linux/suspend.h> + + +static void qcom_pm_enter_freeze(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + drv->states[index].enter(dev, drv, index); +} + +static const struct of_device_id qcom_idle_state_match[] = { + { .compatible = "qcom,idle-state-spc", }, + { }, +}; + +static const struct platform_suspend_ops qcom_suspend_ops = { + .valid = suspend_valid_only_mem, +}; + +static int __init qcom_pm_init(void) +{ + struct cpuidle_device *cpu_dev; + struct cpuidle_driver *cpu_drv; + int state_count; + struct device_node *state_np, *cpu_np; + const struct of_device_id *match; + int i; + + /* configure CPU enter_freeze if applicable */ + for_each_present_cpu(i) { + cpu_np = of_get_cpu_node(i, NULL); + cpu_dev = per_cpu_ptr(cpuidle_devices, i); + cpu_drv = cpuidle_get_cpu_driver(cpu_dev); + + if (!cpu_dev || !cpu_drv) { + of_node_put(cpu_np); + return -EPROBE_DEFER; + } + + state_count = 0; + state_np = of_parse_phandle(cpu_np, "cpu-idle-states", + state_count); + + while (state_np) { + match = of_match_node(qcom_idle_state_match, + state_np); + + state_count++; + if (match) + cpu_drv->states[state_count].enter_freeze = + &qcom_pm_enter_freeze; + of_node_put(state_np); + + state_np = of_parse_phandle(cpu_np, "cpu-idle-states", + state_count); + } + + of_node_put(cpu_np); + } + + suspend_set_ops(&qcom_suspend_ops); + + return 0; +} + +late_initcall(qcom_pm_init);
This patch adds suspend to idle support for Qualcomm processors. While suspend to memory will be a valid state, there won't be any special handling or power savings over the suspend to idle. Signed-off-by: Andy Gross <andy.gross@linaro.org> --- drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/suspend.c | 77 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 78 insertions(+) create mode 100644 drivers/soc/qcom/suspend.c