| Message ID | 1471337998-6467-4-git-send-email-wenyou.yang@atmel.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Hi, On Tue, Aug 16, 2016 at 04:59:54PM +0800, Wenyou Yang wrote: > Add the charger status change interrupt support, it will report > the power supply changed event. > > This interrupt is generated by one of the conditions as below: > - the state machine jumps out of or into the EOC state > - the CHGIN input voltage goes out of or into the valid range. > - the battery temperature goes out of or into the valid range. > - the PRECHARGE time-out occurs. > - the total charge time-out occurs. This is unsafe during module remove, since irq work may be scheduled while power-supply is unregistered. You will have to add a remove function, which does something like charger->init_done = false; cancel_work_sync(&charger->work); -- Sebastian > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > --- > > Changes in v5: None > Changes in v4: > - Use "interrupts" property, instead of "active-semi,lbo-gpios" > for irq. > > Changes in v3: None > Changes in v2: None > > drivers/power/supply/act8945a_charger.c | 82 ++++++++++++++++++++++++++++++--- > 1 file changed, 75 insertions(+), 7 deletions(-) > > diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c > index 6ddfc1d..74778f7 100644 > --- a/drivers/power/supply/act8945a_charger.c > +++ b/drivers/power/supply/act8945a_charger.c > @@ -10,9 +10,11 @@ > * published by the Free Software Foundation. > * > */ > +#include <linux/interrupt.h> > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_gpio.h> > +#include <linux/of_irq.h> > #include <linux/platform_device.h> > #include <linux/power_supply.h> > #include <linux/regmap.h> > @@ -75,7 +77,11 @@ static const char *act8945a_charger_manufacturer = "Active-semi"; > #define APCH_STATE_CSTATE_PRE 0x03 > > struct act8945a_charger { > + struct power_supply *psy; > struct regmap *regmap; > + struct work_struct work; > + > + bool init_done; > }; > > static int act8945a_get_charger_state(struct regmap *regmap, int *val) > @@ -252,6 +258,47 @@ static const struct power_supply_desc act8945a_charger_desc = { > .num_properties = ARRAY_SIZE(act8945a_charger_props), > }; > > +static int act8945a_enable_interrupt(struct act8945a_charger *charger) > +{ > + struct regmap *regmap = charger->regmap; > + unsigned char ctrl; > + int ret; > + > + ctrl = APCH_CTRL_CHGEOCOUT | APCH_CTRL_CHGEOCIN | > + APCH_CTRL_INDIS | APCH_CTRL_INCON | > + APCH_CTRL_TEMPOUT | APCH_CTRL_TEMPIN | > + APCH_CTRL_TIMRPRE | APCH_CTRL_TIMRTOT; > + ret = regmap_write(regmap, ACT8945A_APCH_CTRL, ctrl); > + if (ret) > + return ret; > + > + ctrl = APCH_STATUS_CHGSTAT | APCH_STATUS_INSTAT | > + APCH_STATUS_TEMPSTAT | APCH_STATUS_TIMRSTAT; > + ret = regmap_write(regmap, ACT8945A_APCH_STATUS, ctrl); > + if (ret) > + return ret; > + > + return 0; > +} > + > +static void act8945a_work(struct work_struct *work) > +{ > + struct act8945a_charger *charger = > + container_of(work, struct act8945a_charger, work); > + > + power_supply_changed(charger->psy); > +} > + > +static irqreturn_t act8945a_status_changed(int irq, void *dev_id) > +{ > + struct act8945a_charger *charger = dev_id; > + > + if (charger->init_done) > + schedule_work(&charger->work); > + > + return IRQ_HANDLED; > +} > + > #define DEFAULT_TOTAL_TIME_OUT 3 > #define DEFAULT_PRE_TIME_OUT 40 > #define DEFAULT_INPUT_OVP_THRESHOLD 6600 > @@ -360,9 +407,8 @@ static int act8945a_charger_config(struct device *dev, > static int act8945a_charger_probe(struct platform_device *pdev) > { > struct act8945a_charger *charger; > - struct power_supply *psy; > struct power_supply_config psy_cfg = {}; > - int ret; > + int irq, ret; > > charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); > if (!charger) > @@ -378,17 +424,39 @@ static int act8945a_charger_probe(struct platform_device *pdev) > if (ret) > return ret; > > + irq = of_irq_get(pdev->dev.parent->of_node, 0); > + if (irq == -EPROBE_DEFER) { > + dev_err(&pdev->dev, "failed to find IRQ number\n"); > + return -EPROBE_DEFER; > + } > + > + ret = devm_request_irq(&pdev->dev, irq, act8945a_status_changed, > + IRQF_TRIGGER_FALLING, "act8945a_interrupt", > + charger); > + if (ret) { > + dev_err(&pdev->dev, "failed to request nIRQ pin IRQ\n"); > + return ret; > + } > + > psy_cfg.of_node = pdev->dev.parent->of_node; > psy_cfg.drv_data = charger; > > - psy = devm_power_supply_register(&pdev->dev, > - &act8945a_charger_desc, > - &psy_cfg); > - if (IS_ERR(psy)) { > + charger->psy = devm_power_supply_register(&pdev->dev, > + &act8945a_charger_desc, > + &psy_cfg); > + if (IS_ERR(charger->psy)) { > dev_err(&pdev->dev, "failed to register power supply\n"); > - return PTR_ERR(psy); > + return PTR_ERR(charger->psy); > } > > + INIT_WORK(&charger->work, act8945a_work); > + > + ret = act8945a_enable_interrupt(charger); > + if (ret) > + return -EIO; > + > + charger->init_done = true; > + > return 0; > } > > -- > 2.7.4 >
diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c index 6ddfc1d..74778f7 100644 --- a/drivers/power/supply/act8945a_charger.c +++ b/drivers/power/supply/act8945a_charger.c @@ -10,9 +10,11 @@ * published by the Free Software Foundation. * */ +#include <linux/interrupt.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_gpio.h> +#include <linux/of_irq.h> #include <linux/platform_device.h> #include <linux/power_supply.h> #include <linux/regmap.h> @@ -75,7 +77,11 @@ static const char *act8945a_charger_manufacturer = "Active-semi"; #define APCH_STATE_CSTATE_PRE 0x03 struct act8945a_charger { + struct power_supply *psy; struct regmap *regmap; + struct work_struct work; + + bool init_done; }; static int act8945a_get_charger_state(struct regmap *regmap, int *val) @@ -252,6 +258,47 @@ static const struct power_supply_desc act8945a_charger_desc = { .num_properties = ARRAY_SIZE(act8945a_charger_props), }; +static int act8945a_enable_interrupt(struct act8945a_charger *charger) +{ + struct regmap *regmap = charger->regmap; + unsigned char ctrl; + int ret; + + ctrl = APCH_CTRL_CHGEOCOUT | APCH_CTRL_CHGEOCIN | + APCH_CTRL_INDIS | APCH_CTRL_INCON | + APCH_CTRL_TEMPOUT | APCH_CTRL_TEMPIN | + APCH_CTRL_TIMRPRE | APCH_CTRL_TIMRTOT; + ret = regmap_write(regmap, ACT8945A_APCH_CTRL, ctrl); + if (ret) + return ret; + + ctrl = APCH_STATUS_CHGSTAT | APCH_STATUS_INSTAT | + APCH_STATUS_TEMPSTAT | APCH_STATUS_TIMRSTAT; + ret = regmap_write(regmap, ACT8945A_APCH_STATUS, ctrl); + if (ret) + return ret; + + return 0; +} + +static void act8945a_work(struct work_struct *work) +{ + struct act8945a_charger *charger = + container_of(work, struct act8945a_charger, work); + + power_supply_changed(charger->psy); +} + +static irqreturn_t act8945a_status_changed(int irq, void *dev_id) +{ + struct act8945a_charger *charger = dev_id; + + if (charger->init_done) + schedule_work(&charger->work); + + return IRQ_HANDLED; +} + #define DEFAULT_TOTAL_TIME_OUT 3 #define DEFAULT_PRE_TIME_OUT 40 #define DEFAULT_INPUT_OVP_THRESHOLD 6600 @@ -360,9 +407,8 @@ static int act8945a_charger_config(struct device *dev, static int act8945a_charger_probe(struct platform_device *pdev) { struct act8945a_charger *charger; - struct power_supply *psy; struct power_supply_config psy_cfg = {}; - int ret; + int irq, ret; charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); if (!charger) @@ -378,17 +424,39 @@ static int act8945a_charger_probe(struct platform_device *pdev) if (ret) return ret; + irq = of_irq_get(pdev->dev.parent->of_node, 0); + if (irq == -EPROBE_DEFER) { + dev_err(&pdev->dev, "failed to find IRQ number\n"); + return -EPROBE_DEFER; + } + + ret = devm_request_irq(&pdev->dev, irq, act8945a_status_changed, + IRQF_TRIGGER_FALLING, "act8945a_interrupt", + charger); + if (ret) { + dev_err(&pdev->dev, "failed to request nIRQ pin IRQ\n"); + return ret; + } + psy_cfg.of_node = pdev->dev.parent->of_node; psy_cfg.drv_data = charger; - psy = devm_power_supply_register(&pdev->dev, - &act8945a_charger_desc, - &psy_cfg); - if (IS_ERR(psy)) { + charger->psy = devm_power_supply_register(&pdev->dev, + &act8945a_charger_desc, + &psy_cfg); + if (IS_ERR(charger->psy)) { dev_err(&pdev->dev, "failed to register power supply\n"); - return PTR_ERR(psy); + return PTR_ERR(charger->psy); } + INIT_WORK(&charger->work, act8945a_work); + + ret = act8945a_enable_interrupt(charger); + if (ret) + return -EIO; + + charger->init_done = true; + return 0; }
Add the charger status change interrupt support, it will report the power supply changed event. This interrupt is generated by one of the conditions as below: - the state machine jumps out of or into the EOC state - the CHGIN input voltage goes out of or into the valid range. - the battery temperature goes out of or into the valid range. - the PRECHARGE time-out occurs. - the total charge time-out occurs. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> --- Changes in v5: None Changes in v4: - Use "interrupts" property, instead of "active-semi,lbo-gpios" for irq. Changes in v3: None Changes in v2: None drivers/power/supply/act8945a_charger.c | 82 ++++++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 7 deletions(-)