diff mbox

[v9,5/5] clk: samsung: exynos-audss: Add support for runtime PM

Message ID 1503302703-13801-6-git-send-email-m.szyprowski@samsung.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Marek Szyprowski Aug. 21, 2017, 8:05 a.m. UTC
This patch adds support for runtime PM to Exynos Audio SubSystem driver to
enable full support for audio power domain on Exynos5 SoCs. The main change
is moving register saving and restoring code from system sleep PM ops to
runtime PM ops and implementing system sleep PM ops with generic
pm_runtime_force_suspend/resume helpers. Runtime PM of the Exynos AudSS
device is managed from clock core depending on the preparation status
of the provided clocks.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 .../devicetree/bindings/clock/clk-exynos-audss.txt |  6 +++
 drivers/clk/samsung/clk-exynos-audss.c             | 51 ++++++++++++++--------
 2 files changed, 40 insertions(+), 17 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
index 0c3d6015868d..f3635d5aeba4 100644
--- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@@ -33,6 +33,12 @@  Required Properties:
 - clock-names: Aliases for the above clocks. They should be "pll_ref",
   "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively.
 
+Optional Properties:
+
+  - power-domains: a phandle to respective power domain node as described by
+    generic PM domain bindings (see power/power_domain.txt for more
+    information).
+
 The following is the list of clocks generated by the controller. Each clock is
 assigned an identifier and client nodes use this identifier to specify the
 clock which they consume. Some of the clocks are available only on a particular
diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
index 6be52fb46ff3..ab494c104ce6 100644
--- a/drivers/clk/samsung/clk-exynos-audss.c
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@@ -18,6 +18,7 @@ 
 #include <linux/syscore_ops.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
@@ -36,14 +37,13 @@ 
 #define ASS_CLK_DIV 0x4
 #define ASS_CLK_GATE 0x8
 
-#ifdef CONFIG_PM_SLEEP
 static unsigned long reg_save[][2] = {
 	{ ASS_CLK_SRC,  0 },
 	{ ASS_CLK_DIV,  0 },
 	{ ASS_CLK_GATE, 0 },
 };
 
-static int exynos_audss_clk_suspend(struct device *dev)
+static int __maybe_unused exynos_audss_clk_suspend(struct device *dev)
 {
 	int i;
 
@@ -53,7 +53,7 @@  static int exynos_audss_clk_suspend(struct device *dev)
 	return 0;
 }
 
-static int exynos_audss_clk_resume(struct device *dev)
+static int __maybe_unused exynos_audss_clk_resume(struct device *dev)
 {
 	int i;
 
@@ -62,7 +62,6 @@  static int exynos_audss_clk_resume(struct device *dev)
 
 	return 0;
 }
-#endif /* CONFIG_PM_SLEEP */
 
 struct exynos_audss_clk_drvdata {
 	unsigned int has_adma_clk:1;
@@ -179,7 +178,18 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 			}
 		}
 	}
-	clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss",
+
+	/*
+	 * Enable runtime PM here to allow the clock core using runtime PM
+	 * for the registered clocks. Additionally, we increase the runtime
+	 * PM usage count before registering the clocks, to prevent the
+	 * clock core from runtime suspending the device.
+	 */
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(dev, "mout_audss",
 				mout_audss_p, ARRAY_SIZE(mout_audss_p),
 				CLK_SET_RATE_NO_REPARENT,
 				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
@@ -190,48 +200,48 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 		mout_i2s_p[1] = __clk_get_name(cdclk);
 	if (!IS_ERR(sclk_audio))
 		mout_i2s_p[2] = __clk_get_name(sclk_audio);
-	clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(NULL, "mout_i2s",
+	clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(dev, "mout_i2s",
 				mout_i2s_p, ARRAY_SIZE(mout_i2s_p),
 				CLK_SET_RATE_NO_REPARENT,
 				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
 
-	clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(NULL, "dout_srp",
+	clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(dev, "dout_srp",
 				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
 				0, &lock);
 
-	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(NULL,
+	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(dev,
 				"dout_aud_bus", "dout_srp", 0,
 				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
 
-	clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(NULL, "dout_i2s",
+	clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(dev, "dout_i2s",
 				"mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
 				&lock);
 
-	clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(NULL, "srp_clk",
+	clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(dev, "srp_clk",
 				"dout_srp", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 0, 0, &lock);
 
-	clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(NULL, "i2s_bus",
+	clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(dev, "i2s_bus",
 				"dout_aud_bus", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 2, 0, &lock);
 
-	clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(NULL, "sclk_i2s",
+	clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(dev, "sclk_i2s",
 				"dout_i2s", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 3, 0, &lock);
 
-	clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(NULL, "pcm_bus",
+	clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(dev, "pcm_bus",
 				 "sclk_pcm", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 4, 0, &lock);
 
 	sclk_pcm_in = devm_clk_get(dev, "sclk_pcm_in");
 	if (!IS_ERR(sclk_pcm_in))
 		sclk_pcm_p = __clk_get_name(sclk_pcm_in);
-	clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(NULL, "sclk_pcm",
+	clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(dev, "sclk_pcm",
 				sclk_pcm_p, CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 5, 0, &lock);
 
 	if (variant->has_adma_clk) {
-		clk_table[EXYNOS_ADMA] = clk_hw_register_gate(NULL, "adma",
+		clk_table[EXYNOS_ADMA] = clk_hw_register_gate(dev, "adma",
 				"dout_srp", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 9, 0, &lock);
 	}
@@ -251,10 +261,14 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 		goto unregister;
 	}
 
+	pm_runtime_put_sync(dev);
+
 	return 0;
 
 unregister:
 	exynos_audss_clk_teardown();
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 
 	if (!IS_ERR(epll))
 		clk_disable_unprepare(epll);
@@ -267,6 +281,7 @@  static int exynos_audss_clk_remove(struct platform_device *pdev)
 	of_clk_del_provider(pdev->dev.of_node);
 
 	exynos_audss_clk_teardown();
+	pm_runtime_disable(&pdev->dev);
 
 	if (!IS_ERR(epll))
 		clk_disable_unprepare(epll);
@@ -275,8 +290,10 @@  static int exynos_audss_clk_remove(struct platform_device *pdev)
 }
 
 static const struct dev_pm_ops exynos_audss_clk_pm_ops = {
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(exynos_audss_clk_suspend,
-				     exynos_audss_clk_resume)
+	SET_RUNTIME_PM_OPS(exynos_audss_clk_suspend, exynos_audss_clk_resume,
+			   NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				     pm_runtime_force_resume)
 };
 
 static struct platform_driver exynos_audss_clk_driver = {