diff mbox

[PATCH/RFT,v3,1/3] thermal: rcar_thermal: add r8a77995 support

Message ID 1522759385-17661-2-git-send-email-ykaneko0929@gmail.com (mailing list archive)
State Superseded, archived
Delegated to: Eduardo Valentin
Headers show

Commit Message

Yoshihiro Kaneko April 3, 2018, 12:43 p.m. UTC
Add support for R-Car D3 (r8a77995) thermal sensor.

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/thermal/rcar_thermal.c | 154 ++++++++++++++++++++++++++++++++---------
 1 file changed, 122 insertions(+), 32 deletions(-)

Comments

Simon Horman May 9, 2018, 6:11 p.m. UTC | #1
On Tue, Apr 03, 2018 at 09:43:03PM +0900, Yoshihiro Kaneko wrote:
> Add support for R-Car D3 (r8a77995) thermal sensor.
> 
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> ---
>  drivers/thermal/rcar_thermal.c | 154 ++++++++++++++++++++++++++++++++---------
>  1 file changed, 122 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
> index 73e5fee..5ec47a9 100644
> --- a/drivers/thermal/rcar_thermal.c
> +++ b/drivers/thermal/rcar_thermal.c
> @@ -58,10 +58,43 @@ struct rcar_thermal_common {
>  	spinlock_t lock;
>  };
>  
> +struct rcar_thermal_chip {
> +	unsigned int use_of_thermal : 1;
> +	unsigned int has_filonoff : 1;
> +	unsigned int irq_per_ch : 1;
> +	unsigned int needs_suspend_resume : 1;
> +	unsigned int nirqs;
> +};
> +
> +static const struct rcar_thermal_chip rcar_thermal = {
> +	.use_of_thermal = 0,
> +	.has_filonoff = 1,
> +	.irq_per_ch = 0,
> +	.needs_suspend_resume = 0,
> +	.nirqs = 1,
> +};
> +
> +static const struct rcar_thermal_chip rcar_gen2_thermal = {
> +	.use_of_thermal = 1,
> +	.has_filonoff = 1,
> +	.irq_per_ch = 0,
> +	.needs_suspend_resume = 0,
> +	.nirqs = 1,
> +};
> +
> +static const struct rcar_thermal_chip rcar_gen3_thermal = {
> +	.use_of_thermal = 1,
> +	.has_filonoff = 0,
> +	.irq_per_ch = 1,
> +	.needs_suspend_resume = 1,
> +	.nirqs = 2,
> +};

The binding and dts patches in this series describe 3 interrupts
for R-Car D3. But the above specifies two. Am I missing something obvious?
Simon Horman May 15, 2018, 7:26 a.m. UTC | #2
On Mon, May 14, 2018 at 06:11:59AM +0900, Yoshihiro Kaneko wrote:
> Hi Simon-san,
> 
> 2018年5月10日(木) 3:11 Simon Horman <horms@verge.net.au>:
> 
> > On Tue, Apr 03, 2018 at 09:43:03PM +0900, Yoshihiro Kaneko wrote:
> > > Add support for R-Car D3 (r8a77995) thermal sensor.
> > >
> > > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> > > ---
> > >  drivers/thermal/rcar_thermal.c | 154
> > ++++++++++++++++++++++++++++++++---------
> > >  1 file changed, 122 insertions(+), 32 deletions(-)
> > >
> > > diff --git a/drivers/thermal/rcar_thermal.c
> > b/drivers/thermal/rcar_thermal.c
> > > index 73e5fee..5ec47a9 100644
> > > --- a/drivers/thermal/rcar_thermal.c
> > > +++ b/drivers/thermal/rcar_thermal.c
> > > @@ -58,10 +58,43 @@ struct rcar_thermal_common {
> > >       spinlock_t lock;
> > >  };
> > >
> > > +struct rcar_thermal_chip {
> > > +     unsigned int use_of_thermal : 1;
> > > +     unsigned int has_filonoff : 1;
> > > +     unsigned int irq_per_ch : 1;
> > > +     unsigned int needs_suspend_resume : 1;
> > > +     unsigned int nirqs;
> > > +};
> > > +
> > > +static const struct rcar_thermal_chip rcar_thermal = {
> > > +     .use_of_thermal = 0,
> > > +     .has_filonoff = 1,
> > > +     .irq_per_ch = 0,
> > > +     .needs_suspend_resume = 0,
> > > +     .nirqs = 1,
> > > +};
> > > +
> > > +static const struct rcar_thermal_chip rcar_gen2_thermal = {
> > > +     .use_of_thermal = 1,
> > > +     .has_filonoff = 1,
> > > +     .irq_per_ch = 0,
> > > +     .needs_suspend_resume = 0,
> > > +     .nirqs = 1,
> > > +};
> > > +
> > > +static const struct rcar_thermal_chip rcar_gen3_thermal = {
> > > +     .use_of_thermal = 1,
> > > +     .has_filonoff = 0,
> > > +     .irq_per_ch = 1,
> > > +     .needs_suspend_resume = 1,
> > > +     .nirqs = 2,
> > > +};
> >
> > The binding and dts patches in this series describe 3 interrupts
> > for R-Car D3. But the above specifies two. Am I missing something obvious?
> 
> 
> R-Car D3 has 3 interrupts, but this driver uses only 2 interrupts to detect
> a temperature change, rise or fall.

Thanks, that makes perfect sense.

Perhaps a comment above ".nirqs = 2" would make it more obvious to the casual
observer?
Yoshihiro Kaneko May 15, 2018, 4:03 p.m. UTC | #3
2018-05-15 16:26 GMT+09:00 Simon Horman <horms@verge.net.au>:
> On Mon, May 14, 2018 at 06:11:59AM +0900, Yoshihiro Kaneko wrote:
>> Hi Simon-san,
>>
>> 2018年5月10日(木) 3:11 Simon Horman <horms@verge.net.au>:
>>
>> > On Tue, Apr 03, 2018 at 09:43:03PM +0900, Yoshihiro Kaneko wrote:
>> > > Add support for R-Car D3 (r8a77995) thermal sensor.
>> > >
>> > > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
>> > > ---
>> > >  drivers/thermal/rcar_thermal.c | 154
>> > ++++++++++++++++++++++++++++++++---------
>> > >  1 file changed, 122 insertions(+), 32 deletions(-)
>> > >
>> > > diff --git a/drivers/thermal/rcar_thermal.c
>> > b/drivers/thermal/rcar_thermal.c
>> > > index 73e5fee..5ec47a9 100644
>> > > --- a/drivers/thermal/rcar_thermal.c
>> > > +++ b/drivers/thermal/rcar_thermal.c
>> > > @@ -58,10 +58,43 @@ struct rcar_thermal_common {
>> > >       spinlock_t lock;
>> > >  };
>> > >
>> > > +struct rcar_thermal_chip {
>> > > +     unsigned int use_of_thermal : 1;
>> > > +     unsigned int has_filonoff : 1;
>> > > +     unsigned int irq_per_ch : 1;
>> > > +     unsigned int needs_suspend_resume : 1;
>> > > +     unsigned int nirqs;
>> > > +};
>> > > +
>> > > +static const struct rcar_thermal_chip rcar_thermal = {
>> > > +     .use_of_thermal = 0,
>> > > +     .has_filonoff = 1,
>> > > +     .irq_per_ch = 0,
>> > > +     .needs_suspend_resume = 0,
>> > > +     .nirqs = 1,
>> > > +};
>> > > +
>> > > +static const struct rcar_thermal_chip rcar_gen2_thermal = {
>> > > +     .use_of_thermal = 1,
>> > > +     .has_filonoff = 1,
>> > > +     .irq_per_ch = 0,
>> > > +     .needs_suspend_resume = 0,
>> > > +     .nirqs = 1,
>> > > +};
>> > > +
>> > > +static const struct rcar_thermal_chip rcar_gen3_thermal = {
>> > > +     .use_of_thermal = 1,
>> > > +     .has_filonoff = 0,
>> > > +     .irq_per_ch = 1,
>> > > +     .needs_suspend_resume = 1,
>> > > +     .nirqs = 2,
>> > > +};
>> >
>> > The binding and dts patches in this series describe 3 interrupts
>> > for R-Car D3. But the above specifies two. Am I missing something obvious?
>>
>>
>> R-Car D3 has 3 interrupts, but this driver uses only 2 interrupts to detect
>> a temperature change, rise or fall.
>
> Thanks, that makes perfect sense.
>
> Perhaps a comment above ".nirqs = 2" would make it more obvious to the casual
> observer?

I agree with you.
I will update this patch.
diff mbox

Patch

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 73e5fee..5ec47a9 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -58,10 +58,43 @@  struct rcar_thermal_common {
 	spinlock_t lock;
 };
 
+struct rcar_thermal_chip {
+	unsigned int use_of_thermal : 1;
+	unsigned int has_filonoff : 1;
+	unsigned int irq_per_ch : 1;
+	unsigned int needs_suspend_resume : 1;
+	unsigned int nirqs;
+};
+
+static const struct rcar_thermal_chip rcar_thermal = {
+	.use_of_thermal = 0,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen2_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen3_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 0,
+	.irq_per_ch = 1,
+	.needs_suspend_resume = 1,
+	.nirqs = 2,
+};
+
 struct rcar_thermal_priv {
 	void __iomem *base;
 	struct rcar_thermal_common *common;
 	struct thermal_zone_device *zone;
+	const struct rcar_thermal_chip *chip;
 	struct delayed_work work;
 	struct mutex lock;
 	struct list_head list;
@@ -77,13 +110,20 @@  struct rcar_thermal_priv {
 #define rcar_priv_to_dev(priv)		((priv)->common->dev)
 #define rcar_has_irq_support(priv)	((priv)->common->base)
 #define rcar_id_to_shift(priv)		((priv)->id * 8)
-#define rcar_of_data(dev)		((unsigned long)of_device_get_match_data(dev))
-#define rcar_use_of_thermal(dev)	(rcar_of_data(dev) == USE_OF_THERMAL)
 
-#define USE_OF_THERMAL	1
 static const struct of_device_id rcar_thermal_dt_ids[] = {
-	{ .compatible = "renesas,rcar-thermal", },
-	{ .compatible = "renesas,rcar-gen2-thermal", .data = (void *)USE_OF_THERMAL },
+	{
+		.compatible = "renesas,rcar-thermal",
+		.data = &rcar_thermal,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-thermal",
+		 .data = &rcar_gen2_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a77995",
+		.data = &rcar_gen3_thermal,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -190,7 +230,8 @@  static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
 	 * enable IRQ
 	 */
 	if (rcar_has_irq_support(priv)) {
-		rcar_thermal_write(priv, FILONOFF, 0);
+		if (priv->chip->has_filonoff)
+			rcar_thermal_write(priv, FILONOFF, 0);
 
 		/* enable Rising/Falling edge interrupt */
 		rcar_thermal_write(priv, POSNEG,  0x1);
@@ -420,7 +461,7 @@  static int rcar_thermal_remove(struct platform_device *pdev)
 
 	rcar_thermal_for_each_priv(priv, common) {
 		rcar_thermal_irq_disable(priv);
-		if (rcar_use_of_thermal(dev))
+		if (priv->chip->use_of_thermal)
 			thermal_remove_hwmon_sysfs(priv->zone);
 		else
 			thermal_zone_device_unregister(priv->zone);
@@ -438,6 +479,7 @@  static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct resource *res, *irq;
+	const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
 	int mres = 0;
 	int i;
 	int ret = -ENODEV;
@@ -457,19 +499,35 @@  static int rcar_thermal_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (irq) {
-		/*
-		 * platform has IRQ support.
-		 * Then, driver uses common registers
-		 * rcar_has_irq_support() will be enabled
-		 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
-		common->base = devm_ioremap_resource(dev, res);
-		if (IS_ERR(common->base))
-			return PTR_ERR(common->base);
+	for (i = 0; i < chip->nirqs; i++) {
+		irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+		if (!irq)
+			continue;
+		if (!common->base) {
+			/*
+			 * platform has IRQ support.
+			 * Then, driver uses common registers
+			 * rcar_has_irq_support() will be enabled
+			 */
+			res = platform_get_resource(pdev, IORESOURCE_MEM,
+						    mres++);
+			common->base = devm_ioremap_resource(dev, res);
+			if (IS_ERR(common->base))
+				return PTR_ERR(common->base);
+
+			idle = 0; /* polling delay is not needed */
+		}
+
+		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
+				       IRQF_SHARED, dev_name(dev), common);
+		if (ret) {
+			dev_err(dev, "irq request failed\n ");
+			goto error_unregister;
+		}
 
-		idle = 0; /* polling delay is not needed */
+		/* update ENR bits */
+		if (chip->irq_per_ch)
+			enr_bits |= 1 << i;
 	}
 
 	for (i = 0;; i++) {
@@ -491,6 +549,7 @@  static int rcar_thermal_probe(struct platform_device *pdev)
 
 		priv->common = common;
 		priv->id = i;
+		priv->chip = chip;
 		mutex_init(&priv->lock);
 		INIT_LIST_HEAD(&priv->list);
 		INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
@@ -498,7 +557,7 @@  static int rcar_thermal_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto error_unregister;
 
-		if (rcar_use_of_thermal(dev))
+		if (chip->use_of_thermal)
 			priv->zone = devm_thermal_zone_of_sensor_register(
 						dev, i, priv,
 						&rcar_thermal_zone_of_ops);
@@ -515,7 +574,7 @@  static int rcar_thermal_probe(struct platform_device *pdev)
 			goto error_unregister;
 		}
 
-		if (rcar_use_of_thermal(dev)) {
+		if (chip->use_of_thermal) {
 			/*
 			 * thermal_zone doesn't enable hwmon as default,
 			 * but, enable it here to keep compatible
@@ -531,20 +590,12 @@  static int rcar_thermal_probe(struct platform_device *pdev)
 		list_move_tail(&priv->list, &common->head);
 
 		/* update ENR bits */
-		enr_bits |= 3 << (i * 8);
+		if (!chip->irq_per_ch)
+			enr_bits |= 3 << (i * 8);
 	}
 
-	/* enable temperature comparation */
-	if (irq) {
-		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
-				       dev_name(dev), common);
-		if (ret) {
-			dev_err(dev, "irq request failed\n ");
-			goto error_unregister;
-		}
-
+	if (enr_bits)
 		rcar_thermal_common_write(common, ENR, enr_bits);
-	}
 
 	dev_info(dev, "%d sensor probed\n", i);
 
@@ -556,9 +607,48 @@  static int rcar_thermal_probe(struct platform_device *pdev)
 	return ret;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int rcar_thermal_suspend(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+
+	if (priv->chip->needs_suspend_resume) {
+		rcar_thermal_common_write(common, ENR, 0);
+		rcar_thermal_irq_disable(priv);
+		rcar_thermal_bset(priv, THSCR, CPCTL, 0);
+	}
+
+	return 0;
+}
+
+static int rcar_thermal_resume(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+	int ret;
+
+	if (priv->chip->needs_suspend_resume) {
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			return ret;
+		rcar_thermal_irq_enable(priv);
+		rcar_thermal_common_write(common, ENR, 0x03);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend,
+			 rcar_thermal_resume);
+
 static struct platform_driver rcar_thermal_driver = {
 	.driver	= {
 		.name	= "rcar_thermal",
+		.pm = &rcar_thermal_pm_ops,
 		.of_match_table = rcar_thermal_dt_ids,
 	},
 	.probe		= rcar_thermal_probe,