diff mbox

[05/18] thermal: exynos: use sanitize_temp_error() in exynos7_tmu_initialize()

Message ID 1524743493-28113-6-git-send-email-b.zolnierkie@samsung.com (mailing list archive)
State Accepted
Delegated to: Eduardo Valentin
Headers show

Commit Message

Bartlomiej Zolnierkiewicz April 26, 2018, 11:51 a.m. UTC 
Fix sanitize_temp_error() to handle Exynos7 SoCs and then use it in
exynos7_tmu_initialize().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/thermal/samsung/exynos_tmu.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

Comments

Daniel Lezcano April 30, 2018, 3:30 p.m. UTC | #1 
On Thu, Apr 26, 2018 at 01:51:20PM +0200, Bartlomiej Zolnierkiewicz wrote:
> Fix sanitize_temp_error() to handle Exynos7 SoCs and then use it in
> exynos7_tmu_initialize().
> 
> There should be no functional changes caused by this patch.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---


Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
diff mbox

Patch

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 3b41666..5a64879 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -286,7 +286,11 @@  static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
 
 static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
 {
-	data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
+	u16 tmu_temp_mask =
+		(data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK
+						: EXYNOS_TMU_TEMP_MASK;
+
+	data->temp_error1 = trim_info & tmu_temp_mask;
 	data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
 				EXYNOS_TMU_TEMP_MASK);
 
@@ -592,12 +596,7 @@  static int exynos7_tmu_initialize(struct platform_device *pdev)
 	unsigned int reg_off, bit_off;
 
 	trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
-
-	data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK;
-	if (!data->temp_error1 ||
-	    (data->min_efuse_value > data->temp_error1) ||
-	    (data->temp_error1 > data->max_efuse_value))
-		data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK;
+	sanitize_temp_error(data, trim_info);
 
 	/* Write temperature code for rising and falling threshold */
 	for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) {