diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 52f5f1a..141ec3e 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -312,3 +312,13 @@ config ARM_PXA2xx_CPUFREQ
 	  This add the CPUFreq driver support for Intel PXA2xx SOCs.

 	  If in doubt, say N.
+
+config ARM_QCOM_CPUFREQ_HW
+	bool "QCOM CPUFreq HW driver"
+	help
+	 Support for the CPUFreq HW driver.
+	 Some QCOM chipsets have a HW engine to offload the steps
+	 necessary for changing the frequency of the CPUs. Firmware loaded
+	 in this engine exposes a programming interafce to the High-level OS.
+	 The driver implements the cpufreq driver interface for this HW engine.
+	 Say Y if you want to support CPUFreq HW.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index fb4a2ec..1226a3e 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -86,6 +86,7 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= tegra186-cpufreq.o
 obj-$(CONFIG_ARM_TI_CPUFREQ)		+= ti-cpufreq.o
 obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
+obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW)	+= qcom-cpufreq-hw.o


 ##################################################################################
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
new file mode 100644
index 0000000..fa25a95
--- /dev/null
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#define INIT_RATE			300000000UL
+#define XO_RATE				19200000UL
+#define LUT_MAX_ENTRIES			40U
+#define CORE_COUNT_VAL(val)		(((val) & (GENMASK(18, 16))) >> 16)
+#define LUT_ROW_SIZE			32
+
+enum {
+	REG_ENABLE,
+	REG_LUT_TABLE,
+	REG_PERF_STATE,
+
+	REG_ARRAY_SIZE,
+};
+
+struct cpufreq_qcom {
+	struct cpufreq_frequency_table *table;
+	struct device *dev;
+	const u16 *reg_offset;
+	void __iomem *base;
+	cpumask_t related_cpus;
+	unsigned int max_cores;
+};
+
+static u16 cpufreq_qcom_std_offsets[REG_ARRAY_SIZE] = {
+	[REG_ENABLE]		= 0x0,
+	[REG_LUT_TABLE]		= 0x110,
+	[REG_PERF_STATE]	= 0x920,
+};
+
+static struct cpufreq_qcom *qcom_freq_domain_map[NR_CPUS];
+
+static int
+qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
+			     unsigned int index)
+{
+	struct cpufreq_qcom *c = policy->driver_data;
+	unsigned int offset = c->reg_offset[REG_PERF_STATE];
+
+	writel_relaxed(index, c->base + offset);
+
+	return 0;
+}
+
+static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
+{
+	struct cpufreq_qcom *c;
+	struct cpufreq_policy *policy;
+	unsigned int index, offset;
+
+	policy = cpufreq_cpu_get_raw(cpu);
+	if (!policy)
+		return 0;
+
+	c = policy->driver_data;
+	offset = c->reg_offset[REG_PERF_STATE];
+
+	index = readl_relaxed(c->base + offset);
+	index = min(index, LUT_MAX_ENTRIES - 1);
+
+	return policy->freq_table[index].frequency;
+}
+
+static unsigned int
+qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
+			    unsigned int target_freq)
+{
+	struct cpufreq_qcom *c = policy->driver_data;
+	unsigned int offset;
+	int index;
+
+	index = cpufreq_table_find_index_l(policy, target_freq);
+	if (index < 0)
+		return 0;
+
+	offset = c->reg_offset[REG_PERF_STATE];
+
+	writel_relaxed(index, c->base + offset);
+
+	return policy->freq_table[index].frequency;
+}
+
+static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpufreq_qcom *c;
+
+	c = qcom_freq_domain_map[policy->cpu];
+	if (!c) {
+		pr_err("No scaling support for CPU%d\n", policy->cpu);
+		return -ENODEV;
+	}
+
+	cpumask_copy(policy->cpus, &c->related_cpus);
+
+	policy->fast_switch_possible = true;
+	policy->freq_table = c->table;
+	policy->driver_data = c;
+
+	return 0;
+}
+
+static struct freq_attr *qcom_cpufreq_hw_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	&cpufreq_freq_attr_scaling_boost_freqs,
+	NULL
+};
+
+static struct cpufreq_driver cpufreq_qcom_hw_driver = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= qcom_cpufreq_hw_target_index,
+	.get		= qcom_cpufreq_hw_get,
+	.init		= qcom_cpufreq_hw_cpu_init,
+	.fast_switch    = qcom_cpufreq_hw_fast_switch,
+	.name		= "qcom-cpufreq-hw",
+	.attr		= qcom_cpufreq_hw_attr,
+	.boost_enabled	= true,
+};
+
+static int qcom_read_lut(struct platform_device *pdev,
+			 struct cpufreq_qcom *c)
+{
+	struct device *dev = &pdev->dev;
+	unsigned int offset;
+	u32 data, src, lval, i, core_count, prev_cc, prev_freq, cur_freq;
+
+	c->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1,
+				sizeof(*c->table), GFP_KERNEL);
+	if (!c->table)
+		return -ENOMEM;
+
+	offset = c->reg_offset[REG_LUT_TABLE];
+
+	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
+		data = readl_relaxed(c->base + offset + i * LUT_ROW_SIZE);
+		src = ((data & GENMASK(31, 30)) >> 30);
+		lval = (data & GENMASK(7, 0));
+		core_count = CORE_COUNT_VAL(data);
+
+		if (src == 0)
+			c->table[i].frequency = INIT_RATE / 1000;
+		else
+			c->table[i].frequency = XO_RATE * lval / 1000;
+
+		cur_freq = c->table[i].frequency;
+
+		dev_dbg(dev, "index=%d freq=%d, core_count %d\n",
+			i, c->table[i].frequency, core_count);
+
+		if (core_count != c->max_cores)
+			cur_freq = CPUFREQ_ENTRY_INVALID;
+
+		/*
+		 * Two of the same frequencies with the same core counts means
+		 * end of table.
+		 */
+		if (i > 0 && c->table[i - 1].frequency ==
+		   c->table[i].frequency && prev_cc == core_count) {
+			struct cpufreq_frequency_table *prev = &c->table[i - 1];
+
+			if (prev_freq == CPUFREQ_ENTRY_INVALID)
+				prev->flags = CPUFREQ_BOOST_FREQ;
+			break;
+		}
+		prev_cc = core_count;
+		prev_freq = cur_freq;
+	}
+
+	c->table[i].frequency = CPUFREQ_TABLE_END;
+
+	return 0;
+}
+
+static int qcom_get_related_cpus(struct device_node *np, struct cpumask *m)
+{
+	struct device_node *cpu_np, *freq_np;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		cpu_np = of_cpu_device_node_get(cpu);
+		if (!cpu_np)
+			continue;
+		freq_np = of_parse_phandle(cpu_np, "qcom,freq-domain", 0);
+		if (!freq_np) {
+			of_node_put(cpu_np);
+			continue;
+		}
+		if (freq_np == np)
+			cpumask_set_cpu(cpu, m);
+
+		of_node_put(cpu_np);
+	}
+
+	return 0;
+}
+
+static int qcom_cpu_resources_init(struct platform_device *pdev,
+				   struct device_node *np, unsigned int cpu)
+{
+	struct cpufreq_qcom *c;
+	struct resource res;
+	struct device *dev = &pdev->dev;
+	unsigned int offset, cpu_r;
+	int ret;
+
+	c = devm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
+	if (!c)
+		return -ENOMEM;
+
+	c->reg_offset = of_device_get_match_data(&pdev->dev);
+	if (!c->reg_offset)
+		return -EINVAL;
+
+	if (of_address_to_resource(np, 0, &res))
+		return -ENOMEM;
+
+	c->base = devm_ioremap(dev, res.start, resource_size(&res));
+	if (!c->base) {
+		dev_err(dev, "Unable to map %s base\n", np->name);
+		return -ENOMEM;
+	}
+
+	offset = c->reg_offset[REG_ENABLE];
+
+	/* HW should be in enabled state to proceed */
+	if (!(readl_relaxed(c->base + offset) & 0x1)) {
+		dev_err(dev, "%s cpufreq hardware not enabled\n", np->name);
+		return -ENODEV;
+	}
+
+	ret = qcom_get_related_cpus(np, &c->related_cpus);
+	if (ret) {
+		dev_err(dev, "%s failed to get related CPUs\n", np->name);
+		return ret;
+	}
+
+	c->max_cores = cpumask_weight(&c->related_cpus);
+	if (!c->max_cores)
+		return -ENOENT;
+
+	ret = qcom_read_lut(pdev, c);
+	if (ret) {
+		dev_err(dev, "%s failed to read LUT\n", np->name);
+		return ret;
+	}
+
+	qcom_freq_domain_map[cpu] = c;
+
+	/* Related CPUs to keep a single copy */
+	cpu_r = cpumask_first(&c->related_cpus);
+	if (cpu != cpu_r) {
+		qcom_freq_domain_map[cpu] = qcom_freq_domain_map[cpu_r];
+		devm_kfree(dev, c);
+	}
+
+	return 0;
+}
+
+static int qcom_resources_init(struct platform_device *pdev)
+{
+	struct device_node *np, *cpu_np;
+	unsigned int cpu;
+	int ret;
+
+	for_each_possible_cpu(cpu) {
+		cpu_np = of_cpu_device_node_get(cpu);
+		if (!cpu_np) {
+			dev_err(&pdev->dev, "Failed to get cpu %d device\n",
+				cpu);
+			continue;
+		}
+
+		np = of_parse_phandle(cpu_np, "qcom,freq-domain", 0);
+		if (!np) {
+			dev_err(&pdev->dev, "Failed to get freq-domain device\n");
+			return -EINVAL;
+		}
+
+		of_node_put(cpu_np);
+
+		ret = qcom_cpu_resources_init(pdev, np, cpu);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
+{
+	int rc;
+
+	/* Get the bases of cpufreq for domains */
+	rc = qcom_resources_init(pdev);
+	if (rc) {
+		dev_err(&pdev->dev, "CPUFreq resource init failed\n");
+		return rc;
+	}
+
+	rc = cpufreq_register_driver(&cpufreq_qcom_hw_driver);
+	if (rc) {
+		dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
+		return rc;
+	}
+
+	dev_info(&pdev->dev, "QCOM CPUFreq HW driver initialized\n");
+
+	return 0;
+}
+
+static const struct of_device_id match_table[] = {
+	{ .compatible = "qcom,cpufreq-hw", .data = &cpufreq_qcom_std_offsets },
+	{}
+};
+
+static struct platform_driver qcom_cpufreq_hw_driver = {
+	.probe = qcom_cpufreq_hw_driver_probe,
+	.driver = {
+		.name = "qcom-cpufreq-hw",
+		.of_match_table = match_table,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init qcom_cpufreq_hw_init(void)
+{
+	return platform_driver_register(&qcom_cpufreq_hw_driver);
+}
+subsys_initcall(qcom_cpufreq_hw_init);
+
+MODULE_DESCRIPTION("QCOM firmware-based CPU Frequency driver");
+MODULE_LICENSE("GPL v2");
