| Message ID | 1537698793-15285-2-git-send-email-tdas@codeaurora.org (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver | expand |
On Sun, Sep 23, 2018 at 04:03:12PM +0530, Taniya Das wrote: > Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's > SoCs. This is required for managing the cpu frequency transitions which are > controlled by the hardware engine. > > Signed-off-by: Taniya Das <tdas@codeaurora.org> > --- > .../bindings/cpufreq/cpufreq-qcom-hw.txt | 169 +++++++++++++++++++++ > 1 file changed, 169 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > new file mode 100644 > index 0000000..c06941c > --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > @@ -0,0 +1,169 @@ > +Qualcomm Technologies, Inc. CPUFREQ Bindings > + > +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) > +SoCs to manage frequency in hardware. It is capable of controlling frequency > +for multiple clusters. > + > +Properties: > +- compatible > + Usage: required > + Value type: <string> > + Definition: must be "qcom,cpufreq-hw". > + > +- clocks > + Usage: required > + Value type: <phandle> From common clock binding. > + Definition: clock handle for XO clock and GPLL0 clock. > + > +- clock-names > + Usage: required > + Value type: <string> From common clock binding. > + Definition: must be "xo", "cpu_clk". > + > +- reg > + Usage: required > + Value type: <prop-encoded-array> > + Definition: Addresses and sizes for the memory of the HW bases in > + each frequency domain. > +- reg-names > + Usage: Optional > + Value type: <string> > + Definition: Frequency domain name i.e. > + "freq-domain0", "freq-domain1". > + > +* Property qcom,freq-domain > +Devices supporting freq-domain must set their "qcom,freq-domain" property with > +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node. > + > + > +Example: > + > +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch > +DCVS state together. > + > +/ { > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + CPU0: cpu@0 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + qcom,freq-domain = <&cpufreq_hw 0>; > + L2_0: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + L3_0: l3-cache { > + compatible = "cache"; > + }; > + }; > + }; > + > + CPU1: cpu@100 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x100>; > + enable-method = "psci"; > + next-level-cache = <&L2_100>; > + qcom,freq-domain = <&cpufreq_hw 0>; > + L2_100: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU2: cpu@200 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x200>; > + enable-method = "psci"; > + next-level-cache = <&L2_200>; > + qcom,freq-domain = <&cpufreq_hw 0>; > + L2_200: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU3: cpu@300 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x300>; > + enable-method = "psci"; > + next-level-cache = <&L2_300>; > + qcom,freq-domain = <&cpufreq_hw 0>; > + L2_300: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU4: cpu@400 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x400>; > + enable-method = "psci"; > + next-level-cache = <&L2_400>; > + qcom,freq-domain = <&cpufreq_hw 1>; > + L2_400: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU5: cpu@500 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x500>; > + enable-method = "psci"; > + next-level-cache = <&L2_500>; > + qcom,freq-domain = <&cpufreq_hw 1>; > + L2_500: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU6: cpu@600 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x600>; > + enable-method = "psci"; > + next-level-cache = <&L2_600>; > + qcom,freq-domain = <&cpufreq_hw 1>; > + L2_600: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU7: cpu@700 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x700>; > + enable-method = "psci"; > + next-level-cache = <&L2_700>; > + qcom,freq-domain = <&cpufreq_hw 1>; > + L2_700: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + }; > + > + soc { > + cpufreq_hw: qcom,cpufreq-hw { Should have a unit-address and node names should be generic. We don't really have one for this, but let's go with 'cpufreq', so: cpufreq@17d43000 > + compatible = "qcom,cpufreq-hw"; > + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; > + reg-names = "freq-domain0", "freq-domain1"; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; > + clock-names = "xo", "cpu_clk"; > + > + #freq-domains-cells = <1> Not documented, but I don't think you need this if it is always 1 and because this is not a common binding. Rob
Hello Rob, Thanks for your review comments. On 9/27/2018 9:01 PM, Rob Herring wrote: > On Sun, Sep 23, 2018 at 04:03:12PM +0530, Taniya Das wrote: >> Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's >> SoCs. This is required for managing the cpu frequency transitions which are >> controlled by the hardware engine. >> >> Signed-off-by: Taniya Das <tdas@codeaurora.org> >> --- >> .../bindings/cpufreq/cpufreq-qcom-hw.txt | 169 +++++++++++++++++++++ >> 1 file changed, 169 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt >> >> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt >> new file mode 100644 >> index 0000000..c06941c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt >> @@ -0,0 +1,169 @@ >> +Qualcomm Technologies, Inc. CPUFREQ Bindings >> + >> +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) >> +SoCs to manage frequency in hardware. It is capable of controlling frequency >> +for multiple clusters. >> + >> +Properties: >> +- compatible >> + Usage: required >> + Value type: <string> >> + Definition: must be "qcom,cpufreq-hw". >> + >> +- clocks >> + Usage: required >> + Value type: <phandle> From common clock binding. >> + Definition: clock handle for XO clock and GPLL0 clock. >> + >> +- clock-names >> + Usage: required >> + Value type: <string> From common clock binding. >> + Definition: must be "xo", "cpu_clk". >> + >> +- reg >> + Usage: required >> + Value type: <prop-encoded-array> >> + Definition: Addresses and sizes for the memory of the HW bases in >> + each frequency domain. >> +- reg-names >> + Usage: Optional >> + Value type: <string> >> + Definition: Frequency domain name i.e. >> + "freq-domain0", "freq-domain1". >> + >> +* Property qcom,freq-domain >> +Devices supporting freq-domain must set their "qcom,freq-domain" property with >> +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node. >> + >> + >> +Example: >> + >> +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch >> +DCVS state together. >> + >> +/ { >> + cpus { >> + #address-cells = <2>; >> + #size-cells = <0>; >> + >> + CPU0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo385"; >> + reg = <0x0 0x0>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + qcom,freq-domain = <&cpufreq_hw 0>; >> + L2_0: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + L3_0: l3-cache { >> + compatible = "cache"; >> + }; >> + }; >> + }; >> + >> + CPU1: cpu@100 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo385"; >> + reg = <0x0 0x100>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_100>; >> + qcom,freq-domain = <&cpufreq_hw 0>; >> + L2_100: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU2: cpu@200 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo385"; >> + reg = <0x0 0x200>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_200>; >> + qcom,freq-domain = <&cpufreq_hw 0>; >> + L2_200: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU3: cpu@300 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo385"; >> + reg = <0x0 0x300>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_300>; >> + qcom,freq-domain = <&cpufreq_hw 0>; >> + L2_300: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU4: cpu@400 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo385"; >> + reg = <0x0 0x400>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_400>; >> + qcom,freq-domain = <&cpufreq_hw 1>; >> + L2_400: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU5: cpu@500 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo385"; >> + reg = <0x0 0x500>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_500>; >> + qcom,freq-domain = <&cpufreq_hw 1>; >> + L2_500: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU6: cpu@600 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo385"; >> + reg = <0x0 0x600>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_600>; >> + qcom,freq-domain = <&cpufreq_hw 1>; >> + L2_600: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU7: cpu@700 { >> + device_type = "cpu"; >> + compatible = "qcom,kryo385"; >> + reg = <0x0 0x700>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_700>; >> + qcom,freq-domain = <&cpufreq_hw 1>; >> + L2_700: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + }; >> + >> + soc { >> + cpufreq_hw: qcom,cpufreq-hw { > > Should have a unit-address and node names should be generic. We don't > really have one for this, but let's go with 'cpufreq', so: > > cpufreq@17d43000 > Thanks Rob, will update in the next patch. >> + compatible = "qcom,cpufreq-hw"; >> + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; >> + reg-names = "freq-domain0", "freq-domain1"; >> + >> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; >> + clock-names = "xo", "cpu_clk"; >> + >> + #freq-domains-cells = <1> > > Not documented, but I don't think you need this if it is always 1 and > because this is not a common binding. > I would add it in the next patch just to keep it documented. > Rob >
On Sun 23 Sep 03:33 PDT 2018, Taniya Das wrote: > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > new file mode 100644 > index 0000000..c06941c > --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > @@ -0,0 +1,169 @@ > +Qualcomm Technologies, Inc. CPUFREQ Bindings > + > +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) > +SoCs to manage frequency in hardware. It is capable of controlling frequency > +for multiple clusters. > + > +Properties: > +- compatible > + Usage: required > + Value type: <string> > + Definition: must be "qcom,cpufreq-hw". As this binding (and driver) operates actual hardware we should probably have a more specific compatible. Or is this the one and only "hardware cpufreq" block that will ever come out of Qualcomm? Regards, Bjorn
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt new file mode 100644 index 0000000..c06941c --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt @@ -0,0 +1,169 @@ +Qualcomm Technologies, Inc. CPUFREQ Bindings + +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) +SoCs to manage frequency in hardware. It is capable of controlling frequency +for multiple clusters. + +Properties: +- compatible + Usage: required + Value type: <string> + Definition: must be "qcom,cpufreq-hw". + +- clocks + Usage: required + Value type: <phandle> From common clock binding. + Definition: clock handle for XO clock and GPLL0 clock. + +- clock-names + Usage: required + Value type: <string> From common clock binding. + Definition: must be "xo", "cpu_clk". + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: Addresses and sizes for the memory of the HW bases in + each frequency domain. +- reg-names + Usage: Optional + Value type: <string> + Definition: Frequency domain name i.e. + "freq-domain0", "freq-domain1". + +* Property qcom,freq-domain +Devices supporting freq-domain must set their "qcom,freq-domain" property with +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node. + + +Example: + +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch +DCVS state together. + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + soc { + cpufreq_hw: qcom,cpufreq-hw { + compatible = "qcom,cpufreq-hw"; + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "cpu_clk"; + + #freq-domains-cells = <1> + + }; +}
Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's SoCs. This is required for managing the cpu frequency transitions which are controlled by the hardware engine. Signed-off-by: Taniya Das <tdas@codeaurora.org> --- .../bindings/cpufreq/cpufreq-qcom-hw.txt | 169 +++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt -- Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.