diff mbox series

[v2,13/17] thermal: tegra: enable+check sensor after its setup is finished

Message ID 1539791563-5959-14-git-send-email-b.zolnierkie@samsung.com (mailing list archive)
State Superseded, archived
Delegated to: Zhang Rui
Headers show
Series thermal: enable+check sensor after its setup is finished | expand

Commit Message

Bartlomiej Zolnierkiewicz Oct. 17, 2018, 3:52 p.m. UTC 
Enable+check sensor after setting zone->tz and programming hwtrips.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/thermal/tegra/soctherm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 2ac9f81..394b34e 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -1375,9 +1375,6 @@  static int tegra_soctherm_probe(struct platform_device *pdev)
 			goto disable_clocks;
 		}
 
-		thermal_zone_set_mode(z, THERMAL_DEVICE_ENABLED);
-		thermal_zone_device_check(z);
-
 		zone->tz = z;
 		tegra->thermctl_tzs[soc->ttgs[i]->id] = z;
 
@@ -1385,6 +1382,9 @@  static int tegra_soctherm_probe(struct platform_device *pdev)
 		err = tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
 		if (err)
 			goto disable_clocks;
+
+		thermal_zone_set_mode(z, THERMAL_DEVICE_ENABLED);
+		thermal_zone_device_check(z);
 	}
 
 	soctherm_debug_init(pdev);