mbox series

[GIT,PULL] thermal material for v6.6-rc1

Message ID 153c9f98-8d8f-a933-dca4-c3ce19ee1f6b@linaro.org (mailing list archive)
State Mainlined, archived
Headers show
Series [GIT,PULL] thermal material for v6.6-rc1 | expand

Pull-request

ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git tags/thermal-v6.6-rc1

Message

Daniel Lezcano Aug. 29, 2023, 1:09 p.m. UTC 
Hi Rafael,

please consider this pull request for the thermal material

Thanks

The following changes since commit f6a756e8fb12923f0e3996a575e935e94f3594eb:

   thermal: Explicitly include correct DT includes (2023-07-31 20:03:42 
+0200)

are available in the Git repository at:

 
ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git 
tags/thermal-v6.6-rc1

for you to fetch changes up to 1ef5a9f61457b921158ef03f3a2b3e789b41be9f:

   thermal/drivers/tegra-bpmp: Check if BPMP supports trip points 
(2023-08-22 19:10:28 +0200)

----------------------------------------------------------------
- Check if the Tegra BPMP supports the trip points in order to set the
   .set_trips callback (Mikko Perttunen)

- Add the new Loongson-2 thermal sensor along with the DT bindings
   (Yinbo Zhu)

- Use IS_ERR_OR_NULL helper to replace a double test on the TI bandgap
   sensor (Li Zetao)

- Remove the call to platform_set_drvdata() as there is no call to
   platform_get_drvdata() in a bunch of drivers where that happens
   (Andrei Coardos)

- Switch the Mediatek LVTS mode to filtered in order to enable the
   interrupts (Nícolas F. R. A. Prado)

- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
   Kozlowski)

- Remove redundant usage of of_match_ptr() as the driver db8500
   already depends on CONFIG_OF (Ruan Jinjie)

- Remove redundant dev_err_probe() because the underlying function
   already called it in the Mediatek sensor (Chen Jiahao)

- Free calibration nvmem after reading it on sun8i (Mark Brown)

- Remove useless comment in the code on sun8i (Yangtao Li)

- Make tsens_xxxx_nvmem static to fix sparse warning on QCom tsens 
(Min-Hua Chen)

- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)

- Fix parameter check in lvts_debugfs_init with IS_ERR on Mediatek
   LVTS (Minjie Du)

- Fix the interrupt routine and configuratoin for the Mediatek LVTS
   (Nícolas F. R. A. Prado)

----------------------------------------------------------------
Ahmad Fatoum (1):
       thermal/drivers/imx8mm: Suppress log message on probe deferral

Andrei Coardos (8):
       thermal/drivers/broadcom/sr-thermal: Removed call to 
platform_set_drvdata()
       thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to 
platform_set_drvdata()
       thermal/drivers/k3_bandgap: Remove unneeded call to 
platform_set_drvdata()
       thermal/drivers/broadcom/brcstb_thermal: Removed unneeded 
platform_set_drvdata()
       thermal/drivers/sun8i_thermal: Remove unneeded call to 
platform_set_drvdata()
       thermal/drivers/mediatek/auxadc_thermal: Removed call to 
platform_set_drvdata()
       thermal/drivers/max77620_thermal: Removed unneeded call to 
platform_set_drvdata()
       thermal/drivers/generic-adc: Removed unneeded call to 
platform_set_drvdata()

Chen Jiahao (1):
       thermal/drivers/mediatek: Clean up redundant dev_err_probe()

Krzysztof Kozlowski (1):
       thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning

Li Zetao (1):
       thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()

Mark Brown (1):
       thermal/drivers/sun8i: Free calibration nvmem after reading it

Mikko Perttunen (1):
       thermal/drivers/tegra-bpmp: Check if BPMP supports trip points

Min-Hua Chen (1):
       thermal/drivers/tsens: Make tsens_xxxx_nvmem static

Minjie Du (1):
       thermal/drivers/mediatek/lvts: Fix parameter check in 
lvts_debugfs_init()

Nícolas F. R. A. Prado (7):
       thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers
       thermal/drivers/mediatek/lvts_thermal: Honor sensors in immediate 
mode
       thermal/drivers/mediatek/lvts_thermal: Use offset threshold for IRQ
       thermal/drivers/mediatek/lvts_thermal: Disable undesired interrupts
       thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed
       thermal/drivers/mediatek/lvts_thermal: Manage threshold between 
sensors
       thermal/drivers/mediatek/lvts_thermal: Make readings valid in 
filtered mode

Ruan Jinjie (1):
       thermal/drivers/db8500: Remove redundant of_match_ptr()

Yangtao Li (1):
       thermal/drivers/sun8i: Remove unneeded comments

Yinbo Zhu (2):
       thermal/drivers/loongson-2: Add thermal management support
       thermal: dt-bindings: add loongson-2 thermal

  Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml | 
  44 +++++++++++++
  MAINTAINERS                                                          | 
   8 +++
  drivers/thermal/Kconfig                                              | 
  12 ++++
  drivers/thermal/Makefile                                             | 
   1 +
  drivers/thermal/broadcom/brcmstb_thermal.c                           | 
   1 -
  drivers/thermal/broadcom/sr-thermal.c                                | 
   1 -
  drivers/thermal/db8500_thermal.c                                     | 
   2 +-
  drivers/thermal/imx8mm_thermal.c                                     | 
   6 +-
  drivers/thermal/k3_bandgap.c                                         | 
   1 -
  drivers/thermal/k3_j72xx_bandgap.c                                   | 
   2 -
  drivers/thermal/loongson2_thermal.c                                  | 
169 ++++++++++++++++++++++++++++++++++++++++++++++++
  drivers/thermal/max77620_thermal.c                                   | 
   2 -
  drivers/thermal/mediatek/auxadc_thermal.c                            | 
   2 -
  drivers/thermal/mediatek/lvts_thermal.c                              | 
175 +++++++++++++++++++++++++++++++++++++-------------
  drivers/thermal/qcom/tsens-v0_1.c                                    | 
   6 +-
  drivers/thermal/qcom/tsens-v1.c                                      | 
   2 +-
  drivers/thermal/samsung/exynos_tmu.c                                 | 
   2 +-
  drivers/thermal/sun8i_thermal.c                                      | 
   8 +--
  drivers/thermal/tegra/tegra-bpmp-thermal.c                           | 
  52 ++++++++++++++-
  drivers/thermal/thermal-generic-adc.c                                | 
   1 -
  drivers/thermal/ti-soc-thermal/ti-bandgap.c                          | 
   2 +-
  21 files changed, 426 insertions(+), 73 deletions(-)
  create mode 100644 
Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
  create mode 100644 drivers/thermal/loongson2_thermal.c

Comments

Rafael J. Wysocki Aug. 29, 2023, 4:51 p.m. UTC | #1 
Hi Daniel,

On Tue, Aug 29, 2023 at 3:11 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
>
> Hi Rafael,
>
> please consider this pull request for the thermal material
>
> Thanks
>
> The following changes since commit f6a756e8fb12923f0e3996a575e935e94f3594eb:
>
>    thermal: Explicitly include correct DT includes (2023-07-31 20:03:42
> +0200)
>
> are available in the Git repository at:
>
>
> ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v6.6-rc1
>
> for you to fetch changes up to 1ef5a9f61457b921158ef03f3a2b3e789b41be9f:
>
>    thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
> (2023-08-22 19:10:28 +0200)
>
> ----------------------------------------------------------------
> - Check if the Tegra BPMP supports the trip points in order to set the
>    .set_trips callback (Mikko Perttunen)
>
> - Add the new Loongson-2 thermal sensor along with the DT bindings
>    (Yinbo Zhu)
>
> - Use IS_ERR_OR_NULL helper to replace a double test on the TI bandgap
>    sensor (Li Zetao)
>
> - Remove the call to platform_set_drvdata() as there is no call to
>    platform_get_drvdata() in a bunch of drivers where that happens
>    (Andrei Coardos)
>
> - Switch the Mediatek LVTS mode to filtered in order to enable the
>    interrupts (Nícolas F. R. A. Prado)
>
> - Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
>    Kozlowski)
>
> - Remove redundant usage of of_match_ptr() as the driver db8500
>    already depends on CONFIG_OF (Ruan Jinjie)
>
> - Remove redundant dev_err_probe() because the underlying function
>    already called it in the Mediatek sensor (Chen Jiahao)
>
> - Free calibration nvmem after reading it on sun8i (Mark Brown)
>
> - Remove useless comment in the code on sun8i (Yangtao Li)
>
> - Make tsens_xxxx_nvmem static to fix sparse warning on QCom tsens
> (Min-Hua Chen)
>
> - Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
>
> - Fix parameter check in lvts_debugfs_init with IS_ERR on Mediatek
>    LVTS (Minjie Du)
>
> - Fix the interrupt routine and configuratoin for the Mediatek LVTS
>    (Nícolas F. R. A. Prado)
>
> ----------------------------------------------------------------
> Ahmad Fatoum (1):
>        thermal/drivers/imx8mm: Suppress log message on probe deferral
>
> Andrei Coardos (8):
>        thermal/drivers/broadcom/sr-thermal: Removed call to
> platform_set_drvdata()
>        thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to
> platform_set_drvdata()
>        thermal/drivers/k3_bandgap: Remove unneeded call to
> platform_set_drvdata()
>        thermal/drivers/broadcom/brcstb_thermal: Removed unneeded
> platform_set_drvdata()
>        thermal/drivers/sun8i_thermal: Remove unneeded call to
> platform_set_drvdata()
>        thermal/drivers/mediatek/auxadc_thermal: Removed call to
> platform_set_drvdata()
>        thermal/drivers/max77620_thermal: Removed unneeded call to
> platform_set_drvdata()
>        thermal/drivers/generic-adc: Removed unneeded call to
> platform_set_drvdata()
>
> Chen Jiahao (1):
>        thermal/drivers/mediatek: Clean up redundant dev_err_probe()
>
> Krzysztof Kozlowski (1):
>        thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
>
> Li Zetao (1):
>        thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
>
> Mark Brown (1):
>        thermal/drivers/sun8i: Free calibration nvmem after reading it
>
> Mikko Perttunen (1):
>        thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
>
> Min-Hua Chen (1):
>        thermal/drivers/tsens: Make tsens_xxxx_nvmem static
>
> Minjie Du (1):
>        thermal/drivers/mediatek/lvts: Fix parameter check in
> lvts_debugfs_init()
>
> Nícolas F. R. A. Prado (7):
>        thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers
>        thermal/drivers/mediatek/lvts_thermal: Honor sensors in immediate
> mode
>        thermal/drivers/mediatek/lvts_thermal: Use offset threshold for IRQ
>        thermal/drivers/mediatek/lvts_thermal: Disable undesired interrupts
>        thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed
>        thermal/drivers/mediatek/lvts_thermal: Manage threshold between
> sensors
>        thermal/drivers/mediatek/lvts_thermal: Make readings valid in
> filtered mode
>
> Ruan Jinjie (1):
>        thermal/drivers/db8500: Remove redundant of_match_ptr()
>
> Yangtao Li (1):
>        thermal/drivers/sun8i: Remove unneeded comments
>
> Yinbo Zhu (2):
>        thermal/drivers/loongson-2: Add thermal management support
>        thermal: dt-bindings: add loongson-2 thermal

Pulled, merged into the thermal branch and added to the linux-next
branch in linux-pm.git.

Thanks!