@@ -14,4 +14,5 @@
#include <linux/firmware/imx/types.h>
#include <linux/firmware/imx/svc/misc.h>
+#include <linux/firmware/imx/svc/pm.h>
#endif /* _SC_SCI_H */
new file mode 100644
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *
+ * Header file containing the public API for the System Controller (SC)
+ * Power Management (PM) function. This includes functions for power state
+ * control, clock control, reset control, and wake-up event control.
+ *
+ * PM_SVC (SVC) Power Management Service
+ *
+ * Module for the Power Management (PM) service.
+ */
+
+#ifndef _SC_PM_API_H
+#define _SC_PM_API_H
+
+#include <linux/firmware/imx/sci.h>
+
+/*
+ * This type is used to indicate RPC PM function calls.
+ */
+enum imx_sc_pm_func {
+ IMX_SC_PM_FUNC_UNKNOWN = 0,
+ IMX_SC_PM_FUNC_SET_SYS_POWER_MODE = 19,
+ IMX_SC_PM_FUNC_SET_PARTITION_POWER_MODE = 1,
+ IMX_SC_PM_FUNC_GET_SYS_POWER_MODE = 2,
+ IMX_SC_PM_FUNC_SET_RESOURCE_POWER_MODE = 3,
+ IMX_SC_PM_FUNC_GET_RESOURCE_POWER_MODE = 4,
+ IMX_SC_PM_FUNC_REQ_LOW_POWER_MODE = 16,
+ IMX_SC_PM_FUNC_SET_CPU_RESUME_ADDR = 17,
+ IMX_SC_PM_FUNC_REQ_SYS_IF_POWER_MODE = 18,
+ IMX_SC_PM_FUNC_SET_CLOCK_RATE = 5,
+ IMX_SC_PM_FUNC_GET_CLOCK_RATE = 6,
+ IMX_SC_PM_FUNC_CLOCK_ENABLE = 7,
+ IMX_SC_PM_FUNC_SET_CLOCK_PARENT = 14,
+ IMX_SC_PM_FUNC_GET_CLOCK_PARENT = 15,
+ IMX_SC_PM_FUNC_RESET = 13,
+ IMX_SC_PM_FUNC_RESET_REASON = 10,
+ IMX_SC_PM_FUNC_BOOT = 8,
+ IMX_SC_PM_FUNC_REBOOT = 9,
+ IMX_SC_PM_FUNC_REBOOT_PARTITION = 12,
+ IMX_SC_PM_FUNC_CPU_START = 11,
+};
+
+/*
+ * Defines for ALL parameters
+ */
+#define IMX_SC_PM_CLK_ALL UINT8_MAX /* All clocks */
+
+/*
+ * Defines for SC PM Power Mode
+ */
+#define IMX_SC_PM_PW_MODE_OFF 0 /* Power off */
+#define IMX_SC_PM_PW_MODE_STBY 1 /* Power in standby */
+#define IMX_SC_PM_PW_MODE_LP 2 /* Power in low-power */
+#define IMX_SC_PM_PW_MODE_ON 3 /* Power on */
+
+/*
+ * Defines for SC PM CLK
+ */
+#define IMX_SC_PM_CLK_SLV_BUS 0 /* Slave bus clock */
+#define IMX_SC_PM_CLK_MST_BUS 1 /* Master bus clock */
+#define IMX_SC_PM_CLK_PER 2 /* Peripheral clock */
+#define IMX_SC_PM_CLK_PHY 3 /* Phy clock */
+#define IMX_SC_PM_CLK_MISC 4 /* Misc clock */
+#define IMX_SC_PM_CLK_MISC0 0 /* Misc 0 clock */
+#define IMX_SC_PM_CLK_MISC1 1 /* Misc 1 clock */
+#define IMX_SC_PM_CLK_MISC2 2 /* Misc 2 clock */
+#define IMX_SC_PM_CLK_MISC3 3 /* Misc 3 clock */
+#define IMX_SC_PM_CLK_MISC4 4 /* Misc 4 clock */
+#define IMX_SC_PM_CLK_CPU 2 /* CPU clock */
+#define IMX_SC_PM_CLK_PLL 4 /* PLL */
+#define IMX_SC_PM_CLK_BYPASS 4 /* Bypass clock */
+
+/*
+ * Defines for SC PM CLK Parent
+ */
+#define IMX_SC_PM_PARENT_XTAL 0 /* Parent is XTAL. */
+#define IMX_SC_PM_PARENT_PLL0 1 /* Parent is PLL0 */
+#define IMX_SC_PM_PARENT_PLL1 2 /* Parent is PLL1 or PLL0/2 */
+#define IMX_SC_PM_PARENT_PLL2 3 /* Parent in PLL2 or PLL0/4 */
+#define IMX_SC_PM_PARENT_BYPS 4 /* Parent is a bypass clock. */
+
+#endif /* _SC_PM_API_H */
Add SCU PM SVC related protocol definitions which will be used by a number of PM functions like Power Domain, Clock, Reset and etc. The detailed implementation of each function will put in the individual function drivers. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- v4->v8: * no changes v3->v4: * update firmware headfile patch from include/soc/imx to include/linux/firmware/imx v2->v3: * name updated with IMX_SC prefix v1->v2: * new introduced --- include/linux/firmware/imx/sci.h | 1 + include/linux/firmware/imx/svc/pm.h | 85 +++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+) create mode 100644 include/linux/firmware/imx/svc/pm.h