@@ -63,6 +63,13 @@
#define TSC_MAX_NUM 3
+/* default THCODE values if FUSEs are missing */
+static const int thcode[TSC_MAX_NUM][3] = {
+ { 3397, 2800, 2221 },
+ { 3393, 2795, 2216 },
+ { 3389, 2805, 2237 },
+};
+
/* Structure for thermal temperature calculation */
struct equation_coefs {
int a1;
@@ -78,6 +85,7 @@ struct rcar_gen3_thermal_tsc {
int low;
int high;
int tj_2;
+ int id; /* thermal channel id */
};
struct rcar_gen3_thermal_priv {
@@ -129,7 +137,7 @@ static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_tsc *tsc,
- int *ptat, int *thcode,
+ int *ptat, const int *thcode,
unsigned int ths_tj_1)
{
/* TODO: Find documentation and document constant calculation formula */
@@ -163,15 +171,19 @@ static int rcar_gen3_thermal_round(int temp)
static int rcar_gen3_thermal_get_temp(void *devdata, int *temp)
{
struct rcar_gen3_thermal_tsc *tsc = devdata;
- int mcelsius, val1, val2;
+ int mcelsius, val;
u32 reg;
/* Read register and convert to mili Celsius */
reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
- val1 = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1, tsc->coef.a1);
- val2 = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b2, tsc->coef.a2);
- mcelsius = FIXPT_TO_MCELSIUS((val1 + val2) / 2);
+ if (reg <= thcode[tsc->id][1])
+ val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1,
+ tsc->coef.a1);
+ else
+ val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b2,
+ tsc->coef.a2);
+ mcelsius = FIXPT_TO_MCELSIUS(val);
/* Make sure we are inside specifications */
if ((mcelsius < MCELSIUS(-40)) || (mcelsius > MCELSIUS(125)))
@@ -377,11 +389,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
/* default values if FUSEs are missing */
/* TODO: Read values from hardware on supported platforms */
int ptat[3] = { 2631, 1509, 435 };
- int thcode[TSC_MAX_NUM][3] = {
- { 3397, 2800, 2221 },
- { 3393, 2795, 2216 },
- { 3389, 2805, 2237 },
- };
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -438,6 +445,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
ret = PTR_ERR(tsc->base);
goto error_unregister;
}
+ tsc->id = i;
priv->tscs[i] = tsc;
Update the formula to calculate temperature: Currently, current TEMP is calculated as average of val1 (is calculated by formula 1) and val2 (is calculated by formula 2). But, as description in HWM (chapter 10A.3.1.2 Normal Mode.) If (TEMP_CODE < THCODE2[11:0]) CTEMP value should be val1. If (TEMP_CODE > THCODE2[11:0]) CTEMP value should be val2. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> --- drivers/thermal/rcar_gen3_thermal.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-)