| Message ID | 1557155521-30949-13-git-send-email-l.luba@partner.samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Exynos5 Dynamic Memory Controller driver | expand |
On Mon, 6 May 2019 at 17:12, Lukasz Luba <l.luba@partner.samsung.com> wrote: > > Add description of Dynamic Memory Controller and PPMU counters. > They are used by exynos5422-dmc driver. > There is a definition of the memory chip, which is then used during > calculation of timings for each OPP. > The algorithm in the driver needs these two sets to bound the timings. > > Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> > --- > arch/arm/boot/dts/exynos5420.dtsi | 121 +++++++++++++++++++++++++ > arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 122 ++++++++++++++++++++++++++ > 2 files changed, 243 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi > index aaff158..1b66601 100644 > --- a/arch/arm/boot/dts/exynos5420.dtsi > +++ b/arch/arm/boot/dts/exynos5420.dtsi > @@ -14,6 +14,7 @@ > #include <dt-bindings/clock/exynos5420.h> > #include <dt-bindings/clock/exynos-audss-clk.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/pmu/exynos_ppmu.h> > > / { > compatible = "samsung,exynos5420", "samsung,exynos5"; > @@ -235,6 +236,38 @@ > status = "disabled"; > }; > > + dmc: memory-controller@10c20000 { > + compatible = "samsung,exynos5422-dmc"; > + reg = <0x10c20000 0x100>, <0x10c30000 0x100>; > + clocks = <&clock CLK_FOUT_SPLL>, > + <&clock CLK_MOUT_SCLK_SPLL>, > + <&clock CLK_FF_DOUT_SPLL2>, > + <&clock CLK_FOUT_BPLL>, > + <&clock CLK_MOUT_BPLL>, > + <&clock CLK_SCLK_BPLL>, > + <&clock CLK_MOUT_MX_MSPLL_CCORE>, > + <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>, > + <&clock CLK_MOUT_MCLK_CDREX>, > + <&clock CLK_DOUT_CLK2X_PHY0>, > + <&clock CLK_CLKM_PHY0>, > + <&clock CLK_CLKM_PHY1>; > + clock-names = "fout_spll", > + "mout_sclk_spll", > + "ff_dout_spll2", > + "fout_bpll", > + "mout_bpll", > + "sclk_bpll", > + "mout_mx_mspll_ccore", > + "mout_mx_mspll_ccore_phy", > + "mout_mclk_cdrex", > + "dout_clk2x_phy0", > + "clkm_phy0", > + "clkm_phy1"; > + samsung,syscon-clk = <&clock>; > + samsung,syscon-chipid = <&chipid>; > + status = "disabled"; > + }; > + > nocp_mem0_0: nocp@10ca1000 { > compatible = "samsung,exynos5420-nocp"; > reg = <0x10CA1000 0x200>; > @@ -271,6 +304,94 @@ > status = "disabled"; > }; > > + ppmu_dmc0_0: ppmu@10d00000 { > + compatible = "samsung,exynos-ppmu"; > + reg = <0x10d00000 0x2000>; > + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; > + clock-names = "ppmu"; > + events { > + ppmu_event0_dmc0_0: ppmu-event0-dmc0_0 { > + event-name = "ppmu-event0-dmc0_0"; > + event-data-type = <PPMU_RO_DATA_CNT>; > + }; > + ppmu_event1_dmc0_0: ppmu-event1-dmc0_0 { > + event-name = "ppmu-event1-dmc0_0"; > + event-data-type = <PPMU_WO_DATA_CNT>; > + }; > + ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 { > + event-name = "ppmu-event3-dmc0_0"; > + event-data-type = <(PPMU_RO_DATA_CNT | > + PPMU_WO_DATA_CNT)>; > + }; > + }; > + }; > + > + ppmu_dmc0_1: ppmu@10d10000 { > + compatible = "samsung,exynos-ppmu"; > + reg = <0x10d10000 0x2000>; > + clocks = <&clock CLK_PCLK_PPMU_DREX0_1>; > + clock-names = "ppmu"; > + events { > + ppmu_event0_dmc0_1: ppmu-event0-dmc0_1 { > + event-name = "ppmu-event0-dmc0_1"; > + event-data-type = <PPMU_RO_DATA_CNT>; > + }; > + ppmu_event1_dmc0_1: ppmu-event1-dmc0_1 { > + event-name = "ppmu-event1-dmc0_1"; > + event-data-type = <PPMU_WO_DATA_CNT>; > + }; > + ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 { > + event-name = "ppmu-event3-dmc0_1"; > + event-data-type = <(PPMU_RO_DATA_CNT | > + PPMU_WO_DATA_CNT)>; > + }; > + }; > + }; > + > + ppmu_dmc1_0: ppmu@10d60000 { > + compatible = "samsung,exynos-ppmu"; > + reg = <0x10d60000 0x2000>; > + clocks = <&clock CLK_PCLK_PPMU_DREX1_0>; > + clock-names = "ppmu"; > + events { > + ppmu_event0_dmc1_0: ppmu-event0-dmc1_0 { > + event-name = "ppmu-event0-dmc1_0"; > + event-data-type = <PPMU_RO_DATA_CNT>; > + }; > + ppmu_event1_dmc1_0: ppmu-event1-dmc1_0 { > + event-name = "ppmu-event1-dmc1_0"; > + event-data-type = <PPMU_WO_DATA_CNT>; > + }; > + ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 { > + event-name = "ppmu-event3-dmc1_0"; > + event-data-type = <(PPMU_RO_DATA_CNT | > + PPMU_WO_DATA_CNT)>; > + }; > + }; > + }; > + > + ppmu_dmc1_1: ppmu@10d70000 { > + compatible = "samsung,exynos-ppmu"; > + reg = <0x10d70000 0x2000>; > + clocks = <&clock CLK_PCLK_PPMU_DREX1_1>; > + clock-names = "ppmu"; > + events { > + ppmu_event0_dmc1_1: ppmu-event0-dmc1_1 { > + event-name = "ppmu-event0-dmc1_1"; > + event-data-type = <PPMU_RO_DATA_CNT>; > + }; > + ppmu_event1_dmc1_1: ppmu-event1-dmc1_1 { > + event-name = "ppmu-event1-dmc1_1"; > + event-data-type = <PPMU_WO_DATA_CNT>; > + }; > + ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 { > + event-name = "ppmu-event3-dmc1_1"; > + event-data-type = <(PPMU_RO_DATA_CNT | > + PPMU_WO_DATA_CNT)>; > + }; > + }; > + }; > + > gsc_pd: power-domain@10044000 { > compatible = "samsung,exynos4210-pd"; > reg = <0x10044000 0x20>; > diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi > index 25d95de1..76abf03 100644 > --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi > +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi > @@ -34,6 +34,97 @@ > clock-frequency = <24000000>; > }; > }; > + > + dmc_opp_table: opp_table2 { > + compatible = "operating-points-v2"; > + > + opp00 { > + opp-hz = /bits/ 64 <165000000>; > + opp-microvolt = <875000>; > + }; > + opp01 { > + opp-hz = /bits/ 64 <206000000>; > + opp-microvolt = <875000>; > + }; > + opp02 { > + opp-hz = /bits/ 64 <275000000>; > + opp-microvolt = <875000>; > + }; > + opp03 { > + opp-hz = /bits/ 64 <413000000>; > + opp-microvolt = <887500>; > + }; > + opp04 { > + opp-hz = /bits/ 64 <543000000>; > + opp-microvolt = <937500>; > + }; > + opp05 { > + opp-hz = /bits/ 64 <633000000>; > + opp-microvolt = <1012500>; > + }; > + opp06 { > + opp-hz = /bits/ 64 <728000000>; > + opp-microvolt = <1037500>; > + }; > + opp07 { > + opp-hz = /bits/ 64 <825000000>; > + opp-microvolt = <1050000>; > + }; > + }; > + > + samsung_K3QF2F20DB: lpddr3 { > + compatible = "Samsung,K3QF2F20DB", "jedec,lpddr3"; > + density = <16384>; > + io-width = <32>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + tRFC-min-tck = <17>; > + tRRD-min-tck = <2>; > + tRPab-min-tck = <2>; > + tRPpb-min-tck = <2>; > + tRCD-min-tck = <3>; > + tRC-min-tck = <6>; > + tRAS-min-tck = <5>; > + tWTR-min-tck = <2>; > + tWR-min-tck = <7>; > + tRTP-min-tck = <2>; > + tW2W-C2C-min-tck = <0>; > + tR2R-C2C-min-tck = <0>; > + tWL-min-tck = <8>; > + tDQSCK-min-tck = <5>; > + tRL-min-tck = <14>; > + tFAW-min-tck = <5>; > + tXSR-min-tck = <12>; > + tXP-min-tck = <2>; > + tCKE-min-tck = <2>; > + tCKESR-min-tck = <2>; > + tMRD-min-tck = <5>; > + > + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 { > + compatible = "jedec,lpddr3-timings"; > + reg = <800000000>; /* workaround: it shows max-freq */ Please be sure that there are no new warnings (make dtbs W=1). This does not look correct (reg does not match unit address). Best regards, Krzysztof
On 5/8/19 9:25 AM, Krzysztof Kozlowski wrote: > On Mon, 6 May 2019 at 17:12, Lukasz Luba <l.luba@partner.samsung.com> wrote: >> >> Add description of Dynamic Memory Controller and PPMU counters. >> They are used by exynos5422-dmc driver. >> There is a definition of the memory chip, which is then used during >> calculation of timings for each OPP. >> The algorithm in the driver needs these two sets to bound the timings. >> >> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> >> --- >> arch/arm/boot/dts/exynos5420.dtsi | 121 +++++++++++++++++++++++++ >> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 122 ++++++++++++++++++++++++++ >> 2 files changed, 243 insertions(+) >> >> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi >> index aaff158..1b66601 100644 >> --- a/arch/arm/boot/dts/exynos5420.dtsi >> +++ b/arch/arm/boot/dts/exynos5420.dtsi >> @@ -14,6 +14,7 @@ >> #include <dt-bindings/clock/exynos5420.h> >> #include <dt-bindings/clock/exynos-audss-clk.h> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/pmu/exynos_ppmu.h> >> >> / { >> compatible = "samsung,exynos5420", "samsung,exynos5"; >> @@ -235,6 +236,38 @@ >> status = "disabled"; >> }; >> >> + dmc: memory-controller@10c20000 { >> + compatible = "samsung,exynos5422-dmc"; >> + reg = <0x10c20000 0x100>, <0x10c30000 0x100>; >> + clocks = <&clock CLK_FOUT_SPLL>, >> + <&clock CLK_MOUT_SCLK_SPLL>, >> + <&clock CLK_FF_DOUT_SPLL2>, >> + <&clock CLK_FOUT_BPLL>, >> + <&clock CLK_MOUT_BPLL>, >> + <&clock CLK_SCLK_BPLL>, >> + <&clock CLK_MOUT_MX_MSPLL_CCORE>, >> + <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>, >> + <&clock CLK_MOUT_MCLK_CDREX>, >> + <&clock CLK_DOUT_CLK2X_PHY0>, >> + <&clock CLK_CLKM_PHY0>, >> + <&clock CLK_CLKM_PHY1>; >> + clock-names = "fout_spll", >> + "mout_sclk_spll", >> + "ff_dout_spll2", >> + "fout_bpll", >> + "mout_bpll", >> + "sclk_bpll", >> + "mout_mx_mspll_ccore", >> + "mout_mx_mspll_ccore_phy", >> + "mout_mclk_cdrex", >> + "dout_clk2x_phy0", >> + "clkm_phy0", >> + "clkm_phy1"; >> + samsung,syscon-clk = <&clock>; >> + samsung,syscon-chipid = <&chipid>; >> + status = "disabled"; >> + }; >> + >> nocp_mem0_0: nocp@10ca1000 { >> compatible = "samsung,exynos5420-nocp"; >> reg = <0x10CA1000 0x200>; >> @@ -271,6 +304,94 @@ >> status = "disabled"; >> }; >> >> + ppmu_dmc0_0: ppmu@10d00000 { >> + compatible = "samsung,exynos-ppmu"; >> + reg = <0x10d00000 0x2000>; >> + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; >> + clock-names = "ppmu"; >> + events { >> + ppmu_event0_dmc0_0: ppmu-event0-dmc0_0 { >> + event-name = "ppmu-event0-dmc0_0"; >> + event-data-type = <PPMU_RO_DATA_CNT>; >> + }; >> + ppmu_event1_dmc0_0: ppmu-event1-dmc0_0 { >> + event-name = "ppmu-event1-dmc0_0"; >> + event-data-type = <PPMU_WO_DATA_CNT>; >> + }; >> + ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 { >> + event-name = "ppmu-event3-dmc0_0"; >> + event-data-type = <(PPMU_RO_DATA_CNT | >> + PPMU_WO_DATA_CNT)>; >> + }; >> + }; >> + }; >> + >> + ppmu_dmc0_1: ppmu@10d10000 { >> + compatible = "samsung,exynos-ppmu"; >> + reg = <0x10d10000 0x2000>; >> + clocks = <&clock CLK_PCLK_PPMU_DREX0_1>; >> + clock-names = "ppmu"; >> + events { >> + ppmu_event0_dmc0_1: ppmu-event0-dmc0_1 { >> + event-name = "ppmu-event0-dmc0_1"; >> + event-data-type = <PPMU_RO_DATA_CNT>; >> + }; >> + ppmu_event1_dmc0_1: ppmu-event1-dmc0_1 { >> + event-name = "ppmu-event1-dmc0_1"; >> + event-data-type = <PPMU_WO_DATA_CNT>; >> + }; >> + ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 { >> + event-name = "ppmu-event3-dmc0_1"; >> + event-data-type = <(PPMU_RO_DATA_CNT | >> + PPMU_WO_DATA_CNT)>; >> + }; >> + }; >> + }; >> + >> + ppmu_dmc1_0: ppmu@10d60000 { >> + compatible = "samsung,exynos-ppmu"; >> + reg = <0x10d60000 0x2000>; >> + clocks = <&clock CLK_PCLK_PPMU_DREX1_0>; >> + clock-names = "ppmu"; >> + events { >> + ppmu_event0_dmc1_0: ppmu-event0-dmc1_0 { >> + event-name = "ppmu-event0-dmc1_0"; >> + event-data-type = <PPMU_RO_DATA_CNT>; >> + }; >> + ppmu_event1_dmc1_0: ppmu-event1-dmc1_0 { >> + event-name = "ppmu-event1-dmc1_0"; >> + event-data-type = <PPMU_WO_DATA_CNT>; >> + }; >> + ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 { >> + event-name = "ppmu-event3-dmc1_0"; >> + event-data-type = <(PPMU_RO_DATA_CNT | >> + PPMU_WO_DATA_CNT)>; >> + }; >> + }; >> + }; >> + >> + ppmu_dmc1_1: ppmu@10d70000 { >> + compatible = "samsung,exynos-ppmu"; >> + reg = <0x10d70000 0x2000>; >> + clocks = <&clock CLK_PCLK_PPMU_DREX1_1>; >> + clock-names = "ppmu"; >> + events { >> + ppmu_event0_dmc1_1: ppmu-event0-dmc1_1 { >> + event-name = "ppmu-event0-dmc1_1"; >> + event-data-type = <PPMU_RO_DATA_CNT>; >> + }; >> + ppmu_event1_dmc1_1: ppmu-event1-dmc1_1 { >> + event-name = "ppmu-event1-dmc1_1"; >> + event-data-type = <PPMU_WO_DATA_CNT>; >> + }; >> + ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 { >> + event-name = "ppmu-event3-dmc1_1"; >> + event-data-type = <(PPMU_RO_DATA_CNT | >> + PPMU_WO_DATA_CNT)>; >> + }; >> + }; >> + }; >> + >> gsc_pd: power-domain@10044000 { >> compatible = "samsung,exynos4210-pd"; >> reg = <0x10044000 0x20>; >> diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi >> index 25d95de1..76abf03 100644 >> --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi >> +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi >> @@ -34,6 +34,97 @@ >> clock-frequency = <24000000>; >> }; >> }; >> + >> + dmc_opp_table: opp_table2 { >> + compatible = "operating-points-v2"; >> + >> + opp00 { >> + opp-hz = /bits/ 64 <165000000>; >> + opp-microvolt = <875000>; >> + }; >> + opp01 { >> + opp-hz = /bits/ 64 <206000000>; >> + opp-microvolt = <875000>; >> + }; >> + opp02 { >> + opp-hz = /bits/ 64 <275000000>; >> + opp-microvolt = <875000>; >> + }; >> + opp03 { >> + opp-hz = /bits/ 64 <413000000>; >> + opp-microvolt = <887500>; >> + }; >> + opp04 { >> + opp-hz = /bits/ 64 <543000000>; >> + opp-microvolt = <937500>; >> + }; >> + opp05 { >> + opp-hz = /bits/ 64 <633000000>; >> + opp-microvolt = <1012500>; >> + }; >> + opp06 { >> + opp-hz = /bits/ 64 <728000000>; >> + opp-microvolt = <1037500>; >> + }; >> + opp07 { >> + opp-hz = /bits/ 64 <825000000>; >> + opp-microvolt = <1050000>; >> + }; >> + }; >> + >> + samsung_K3QF2F20DB: lpddr3 { >> + compatible = "Samsung,K3QF2F20DB", "jedec,lpddr3"; >> + density = <16384>; >> + io-width = <32>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + tRFC-min-tck = <17>; >> + tRRD-min-tck = <2>; >> + tRPab-min-tck = <2>; >> + tRPpb-min-tck = <2>; >> + tRCD-min-tck = <3>; >> + tRC-min-tck = <6>; >> + tRAS-min-tck = <5>; >> + tWTR-min-tck = <2>; >> + tWR-min-tck = <7>; >> + tRTP-min-tck = <2>; >> + tW2W-C2C-min-tck = <0>; >> + tR2R-C2C-min-tck = <0>; >> + tWL-min-tck = <8>; >> + tDQSCK-min-tck = <5>; >> + tRL-min-tck = <14>; >> + tFAW-min-tck = <5>; >> + tXSR-min-tck = <12>; >> + tXP-min-tck = <2>; >> + tCKE-min-tck = <2>; >> + tCKESR-min-tck = <2>; >> + tMRD-min-tck = <5>; >> + >> + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 { >> + compatible = "jedec,lpddr3-timings"; >> + reg = <800000000>; /* workaround: it shows max-freq */ > > Please be sure that there are no new warnings (make dtbs W=1). This > does not look correct (reg does not match unit address). Rob has also pointed out in the bindings that it should have @800000000. Regarding the dtbs warnings, it does not produce any new even with '@0'. I have changed it to @800000000 in the next version. Regards, Lukasz > > Best regards, > Krzysztof > >
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index aaff158..1b66601 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/clock/exynos5420.h> #include <dt-bindings/clock/exynos-audss-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pmu/exynos_ppmu.h> / { compatible = "samsung,exynos5420", "samsung,exynos5"; @@ -235,6 +236,38 @@ status = "disabled"; }; + dmc: memory-controller@10c20000 { + compatible = "samsung,exynos5422-dmc"; + reg = <0x10c20000 0x100>, <0x10c30000 0x100>; + clocks = <&clock CLK_FOUT_SPLL>, + <&clock CLK_MOUT_SCLK_SPLL>, + <&clock CLK_FF_DOUT_SPLL2>, + <&clock CLK_FOUT_BPLL>, + <&clock CLK_MOUT_BPLL>, + <&clock CLK_SCLK_BPLL>, + <&clock CLK_MOUT_MX_MSPLL_CCORE>, + <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>, + <&clock CLK_MOUT_MCLK_CDREX>, + <&clock CLK_DOUT_CLK2X_PHY0>, + <&clock CLK_CLKM_PHY0>, + <&clock CLK_CLKM_PHY1>; + clock-names = "fout_spll", + "mout_sclk_spll", + "ff_dout_spll2", + "fout_bpll", + "mout_bpll", + "sclk_bpll", + "mout_mx_mspll_ccore", + "mout_mx_mspll_ccore_phy", + "mout_mclk_cdrex", + "dout_clk2x_phy0", + "clkm_phy0", + "clkm_phy1"; + samsung,syscon-clk = <&clock>; + samsung,syscon-chipid = <&chipid>; + status = "disabled"; + }; + nocp_mem0_0: nocp@10ca1000 { compatible = "samsung,exynos5420-nocp"; reg = <0x10CA1000 0x200>; @@ -271,6 +304,94 @@ status = "disabled"; }; + ppmu_dmc0_0: ppmu@10d00000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d00000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; + clock-names = "ppmu"; + events { + ppmu_event0_dmc0_0: ppmu-event0-dmc0_0 { + event-name = "ppmu-event0-dmc0_0"; + event-data-type = <PPMU_RO_DATA_CNT>; + }; + ppmu_event1_dmc0_0: ppmu-event1-dmc0_0 { + event-name = "ppmu-event1-dmc0_0"; + event-data-type = <PPMU_WO_DATA_CNT>; + }; + ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 { + event-name = "ppmu-event3-dmc0_0"; + event-data-type = <(PPMU_RO_DATA_CNT | + PPMU_WO_DATA_CNT)>; + }; + }; + }; + + ppmu_dmc0_1: ppmu@10d10000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d10000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_1>; + clock-names = "ppmu"; + events { + ppmu_event0_dmc0_1: ppmu-event0-dmc0_1 { + event-name = "ppmu-event0-dmc0_1"; + event-data-type = <PPMU_RO_DATA_CNT>; + }; + ppmu_event1_dmc0_1: ppmu-event1-dmc0_1 { + event-name = "ppmu-event1-dmc0_1"; + event-data-type = <PPMU_WO_DATA_CNT>; + }; + ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 { + event-name = "ppmu-event3-dmc0_1"; + event-data-type = <(PPMU_RO_DATA_CNT | + PPMU_WO_DATA_CNT)>; + }; + }; + }; + + ppmu_dmc1_0: ppmu@10d60000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d60000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX1_0>; + clock-names = "ppmu"; + events { + ppmu_event0_dmc1_0: ppmu-event0-dmc1_0 { + event-name = "ppmu-event0-dmc1_0"; + event-data-type = <PPMU_RO_DATA_CNT>; + }; + ppmu_event1_dmc1_0: ppmu-event1-dmc1_0 { + event-name = "ppmu-event1-dmc1_0"; + event-data-type = <PPMU_WO_DATA_CNT>; + }; + ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 { + event-name = "ppmu-event3-dmc1_0"; + event-data-type = <(PPMU_RO_DATA_CNT | + PPMU_WO_DATA_CNT)>; + }; + }; + }; + + ppmu_dmc1_1: ppmu@10d70000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d70000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX1_1>; + clock-names = "ppmu"; + events { + ppmu_event0_dmc1_1: ppmu-event0-dmc1_1 { + event-name = "ppmu-event0-dmc1_1"; + event-data-type = <PPMU_RO_DATA_CNT>; + }; + ppmu_event1_dmc1_1: ppmu-event1-dmc1_1 { + event-name = "ppmu-event1-dmc1_1"; + event-data-type = <PPMU_WO_DATA_CNT>; + }; + ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 { + event-name = "ppmu-event3-dmc1_1"; + event-data-type = <(PPMU_RO_DATA_CNT | + PPMU_WO_DATA_CNT)>; + }; + }; + }; + gsc_pd: power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 25d95de1..76abf03 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -34,6 +34,97 @@ clock-frequency = <24000000>; }; }; + + dmc_opp_table: opp_table2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <165000000>; + opp-microvolt = <875000>; + }; + opp01 { + opp-hz = /bits/ 64 <206000000>; + opp-microvolt = <875000>; + }; + opp02 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <875000>; + }; + opp03 { + opp-hz = /bits/ 64 <413000000>; + opp-microvolt = <887500>; + }; + opp04 { + opp-hz = /bits/ 64 <543000000>; + opp-microvolt = <937500>; + }; + opp05 { + opp-hz = /bits/ 64 <633000000>; + opp-microvolt = <1012500>; + }; + opp06 { + opp-hz = /bits/ 64 <728000000>; + opp-microvolt = <1037500>; + }; + opp07 { + opp-hz = /bits/ 64 <825000000>; + opp-microvolt = <1050000>; + }; + }; + + samsung_K3QF2F20DB: lpddr3 { + compatible = "Samsung,K3QF2F20DB", "jedec,lpddr3"; + density = <16384>; + io-width = <32>; + #address-cells = <1>; + #size-cells = <0>; + + tRFC-min-tck = <17>; + tRRD-min-tck = <2>; + tRPab-min-tck = <2>; + tRPpb-min-tck = <2>; + tRCD-min-tck = <3>; + tRC-min-tck = <6>; + tRAS-min-tck = <5>; + tWTR-min-tck = <2>; + tWR-min-tck = <7>; + tRTP-min-tck = <2>; + tW2W-C2C-min-tck = <0>; + tR2R-C2C-min-tck = <0>; + tWL-min-tck = <8>; + tDQSCK-min-tck = <5>; + tRL-min-tck = <14>; + tFAW-min-tck = <5>; + tXSR-min-tck = <12>; + tXP-min-tck = <2>; + tCKE-min-tck = <2>; + tCKESR-min-tck = <2>; + tMRD-min-tck = <5>; + + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 { + compatible = "jedec,lpddr3-timings"; + reg = <800000000>; /* workaround: it shows max-freq */ + min-freq = <100000000>; + tRFC = <65000>; + tRRD = <6000>; + tRPab = <12000>; + tRPpb = <12000>; + tRCD = <10000>; + tRC = <33750>; + tRAS = <23000>; + tWTR = <3750>; + tWR = <7500>; + tRTP = <3750>; + tW2W-C2C = <0>; + tR2R-C2C = <0>; + tFAW = <25000>; + tXSR = <70000>; + tXP = <3750>; + tCKE = <3750>; + tCKESR = <3750>; + tMRD = <7000>; + }; + }; }; &adc { @@ -132,6 +223,21 @@ cpu-supply = <&buck2_reg>; }; +&dmc { + devfreq-events = <&ppmu_event0_dmc0_0>, <&ppmu_event1_dmc0_0>, + <&ppmu_event3_dmc0_0>, + <&ppmu_event0_dmc0_1>,<&ppmu_event1_dmc0_1>, + <&ppmu_event3_dmc0_1>, + <&ppmu_event0_dmc1_0>, <&ppmu_event1_dmc1_0>, + <&ppmu_event3_dmc1_0>, + <&ppmu_event0_dmc1_1>,<&ppmu_event1_dmc1_1>, + <&ppmu_event3_dmc1_1>; + device-handle = <&samsung_K3QF2F20DB>; + operating-points-v2 = <&dmc_opp_table>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + &hsi2c_4 { status = "okay"; @@ -540,6 +646,22 @@ }; }; +&ppmu_dmc0_0 { + status = "okay"; +}; + +&ppmu_dmc0_1 { + status = "okay"; +}; + +&ppmu_dmc1_0 { + status = "okay"; +}; + +&ppmu_dmc1_1 { + status = "okay"; +}; + &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; };
Add description of Dynamic Memory Controller and PPMU counters. They are used by exynos5422-dmc driver. There is a definition of the memory chip, which is then used during calculation of timings for each OPP. The algorithm in the driver needs these two sets to bound the timings. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> --- arch/arm/boot/dts/exynos5420.dtsi | 121 +++++++++++++++++++++++++ arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 122 ++++++++++++++++++++++++++ 2 files changed, 243 insertions(+)