diff mbox series

[v3,9/9] ARM: at91/defconfig: enable config flags for sam9x60 SoC

Message ID 1575035505-6310-10-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
State Not Applicable, archived
Headers show
Series SoC and defconfig support for SAM9X60 | expand

Commit Message

Claudiu Beznea Nov. 29, 2019, 1:51 p.m. UTC 
Enable config flags for SAM9X60 SoC. This includes SoC flag
(CONFIG_SOC_SAM9X60) and IP/board specific flags as follows:
- atmel maxtouch
- flexcom
- XDMA
- I2S Multi-channel
- mikroelectronica proto board
- SAMA5D2's ADC
- atmel QSPI
- classd

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
 arch/arm/configs/at91_dt_defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 148f753de6c7..5c5df8bc0074 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -13,6 +13,7 @@  CONFIG_ARCH_MULTI_V5=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9=y
+CONFIG_SOC_SAM9X60=y
 # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
@@ -49,6 +50,7 @@  CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
@@ -99,6 +101,7 @@  CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 # CONFIG_SERIO is not set
 CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
@@ -108,11 +111,14 @@  CONFIG_I2C_AT91=y
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_QUADSPI=y
 CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
 CONFIG_MFD_ATMEL_HLCDC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -136,6 +142,9 @@  CONFIG_SND_ATMEL_SOC=y
 CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
 CONFIG_SND_ATMEL_SOC_WM8904=y
 CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_ATMEL_SOC_CLASSD=y
+CONFIG_SND_SOC_MIKROE_PROTO=m
+CONFIG_SND_MCHP_SOC_I2S_MCC=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
@@ -167,9 +176,11 @@  CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
+CONFIG_AT_XDMAC=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
+CONFIG_AT91_SAMA5D2_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
 CONFIG_PWM_ATMEL_HLCDC_PWM=y