| Message ID | 1693250307-8910-7-git-send-email-quic_srichara@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | Add support for IPQ5018 tsens | expand |
On 28/08/2023 21:18, Sricharan Ramabadhran wrote: > IPQ5018 has tsens V1.0 IP with 4 sensors. > There is no RPM, so tsens has to manually enabled. > Adding the tsens and nvmem node. > > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > --- > arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > index 9f13d2dcdfd5..277b3cfc7f72 100644 > --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > @@ -93,6 +93,29 @@ soc: soc@0 { > #size-cells = <1>; > ranges = <0 0 0 0xffffffff>; > > + qfprom_nvmem: qfprom_nvmem@a0000 { Nope. Come on, where do you see such node naming. Please do not send code from downstream, but work on upstream sources. Open other most recent DTS, take a look how it is done and try to do something similar. > + #address-cells = <1>; > + #size-cells = <1>; compatible is always the first property. Then reg. > + compatible = "qcom,ipq5018-qfprom", "qcom,qfprom"; > + reg = <0xa0000 0x1000>; > + > + tsens_calib: calib@248 { > + reg = <0x248 0x10>; > + }; > + }; > + Best regards, Krzysztof
On Mon, 28 Aug 2023 at 22:20, Sricharan Ramabadhran <quic_srichara@quicinc.com> wrote: > > IPQ5018 has tsens V1.0 IP with 4 sensors. > There is no RPM, so tsens has to manually enabled. > Adding the tsens and nvmem node. > > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > --- > arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > index 9f13d2dcdfd5..277b3cfc7f72 100644 > --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > @@ -93,6 +93,29 @@ soc: soc@0 { > #size-cells = <1>; > ranges = <0 0 0 0xffffffff>; > > + qfprom_nvmem: qfprom_nvmem@a0000 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "qcom,ipq5018-qfprom", "qcom,qfprom"; > + reg = <0xa0000 0x1000>; > + > + tsens_calib: calib@248 { > + reg = <0x248 0x10>; > + }; NAK. Please define per-sensor fields here. > + }; > + > + tsens: thermal-sensor@4a9000 { > + compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1"; > + reg = <0x4a9000 0x1000>, /* TM */ > + <0x4a8000 0x1000>; /* SORT */ > + nvmem-cells = <&tsens_calib>; > + nvmem-cell-names = "calib"; > + interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "uplow"; > + #qcom,sensors = <5>; > + #thermal-sensor-cells = <1>; > + }; > + > tlmm: pinctrl@1000000 { > compatible = "qcom,ipq5018-tlmm"; > reg = <0x01000000 0x300000>; > -- > 2.34.1 >
On 8/29/2023 12:55 AM, Krzysztof Kozlowski wrote: > On 28/08/2023 21:18, Sricharan Ramabadhran wrote: >> IPQ5018 has tsens V1.0 IP with 4 sensors. >> There is no RPM, so tsens has to manually enabled. >> Adding the tsens and nvmem node. >> >> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++ >> 1 file changed, 23 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> index 9f13d2dcdfd5..277b3cfc7f72 100644 >> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> @@ -93,6 +93,29 @@ soc: soc@0 { >> #size-cells = <1>; >> ranges = <0 0 0 0xffffffff>; >> >> + qfprom_nvmem: qfprom_nvmem@a0000 { > > Nope. Come on, where do you see such node naming. Please do not send > code from downstream, but work on upstream sources. Open other most > recent DTS, take a look how it is done and try to do something similar. > sure, will fix it up. >> + #address-cells = <1>; >> + #size-cells = <1>; > > compatible is always the first property. Then reg. ok, will fix. Regards, Sricharan
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 9f13d2dcdfd5..277b3cfc7f72 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -93,6 +93,29 @@ soc: soc@0 { #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + qfprom_nvmem: qfprom_nvmem@a0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,ipq5018-qfprom", "qcom,qfprom"; + reg = <0xa0000 0x1000>; + + tsens_calib: calib@248 { + reg = <0x248 0x10>; + }; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SORT */ + nvmem-cells = <&tsens_calib>; + nvmem-cell-names = "calib"; + interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "uplow"; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5018-tlmm"; reg = <0x01000000 0x300000>;
IPQ5018 has tsens V1.0 IP with 4 sensors. There is no RPM, so tsens has to manually enabled. Adding the tsens and nvmem node. Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)