| Message ID | 1693250307-8910-8-git-send-email-quic_srichara@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | Add support for IPQ5018 tsens | expand |
On 28/08/2023 21:18, Sricharan Ramabadhran wrote: > IPQ5018 has 4 thermal sensors (zones). With the > critical temperature being 120'C and action is to reboot. > Adding all the 4 zones here. > Not much benefit of having it separate patch... You added the thermal-sensor for this purpose. Best regards, Krzysztof
On 8/29/2023 1:04 AM, Krzysztof Kozlowski wrote: > On 28/08/2023 21:18, Sricharan Ramabadhran wrote: >> IPQ5018 has 4 thermal sensors (zones). With the >> critical temperature being 120'C and action is to reboot. >> Adding all the 4 zones here. >> > > Not much benefit of having it separate patch... You added the > thermal-sensor for this purpose. ok, will squash. Regards, Sricharan
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 277b3cfc7f72..8ab82a6e8594 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -263,6 +263,64 @@ frame@b128000 { }; }; + thermal-zones { + ubi32-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 1>; + + trips { + ubi32-critical { + temperature = <120000>; + hysteresis = <2>; + type = "critical"; + }; + }; + }; + + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 2>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <2>; + type = "critical"; + }; + }; + }; + + top-glue-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + top_glue-critical { + temperature = <120000>; + hysteresis = <2>; + type = "critical"; + }; + }; + }; + + gephy-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + gephy-critical { + temperature = <120000>; + hysteresis = <2>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
IPQ5018 has 4 thermal sensors (zones). With the critical temperature being 120'C and action is to reboot. Adding all the 4 zones here. Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 58 +++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)