diff mbox

[v2,2/2] cpuidle: Validate cpu_dev in cpuidle_add_sysfs

Message ID 20170323152247.14733-3-svaidy@linux.vnet.ibm.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Vaidyanathan Srinivasan March 23, 2017, 3:22 p.m. UTC
If a given cpu is not in cpu_present and cpu hotplug
is disabled, arch can skip setting up the cpu_dev.

Arch cpuidle driver should pass correct cpu mask
for registration, but failing to do so by the driver
causes error to propagate and crash like this:

[   30.076045] Unable to handle kernel paging request for
				data at address 0x00000048
[   30.076100] Faulting instruction address: 0xc0000000007b2f30
cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
    pc: c0000000007b2f30: kobject_get+0x20/0x70
    lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
    sp: c000003feb18b8f0
   msr: 9000000000009033
   dar: 48
 dsisr: 40000000
  current = 0xc000003fd2ed8300
  paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/0
Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
enter ? for help
[c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
[c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
[c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
[c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
[c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
[c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
[c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
[c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
[c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
[c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74

Validating cpu_dev fixes the crash and reports correct error message like:

[   30.163506] Failed to register cpuidle device for cpu136
[   30.173329] Registration of powernv driver failed.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
---
 drivers/cpuidle/sysfs.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Rafael J. Wysocki March 23, 2017, 3:27 p.m. UTC | #1
On Thu, Mar 23, 2017 at 4:22 PM, Vaidyanathan Srinivasan
<svaidy@linux.vnet.ibm.com> wrote:
> If a given cpu is not in cpu_present and cpu hotplug
> is disabled, arch can skip setting up the cpu_dev.
>
> Arch cpuidle driver should pass correct cpu mask
> for registration, but failing to do so by the driver
> causes error to propagate and crash like this:
>
> [   30.076045] Unable to handle kernel paging request for
>                                 data at address 0x00000048
> [   30.076100] Faulting instruction address: 0xc0000000007b2f30
> cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
>     pc: c0000000007b2f30: kobject_get+0x20/0x70
>     lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
>     sp: c000003feb18b8f0
>    msr: 9000000000009033
>    dar: 48
>  dsisr: 40000000
>   current = 0xc000003fd2ed8300
>   paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
>     pid   = 1, comm = swapper/0
> Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
> 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
> enter ? for help
> [c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
> [c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
> [c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
> [c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
> [c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
> [c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
> [c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
> [c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
> [c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
> [c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74
>
> Validating cpu_dev fixes the crash and reports correct error message like:
>
> [   30.163506] Failed to register cpuidle device for cpu136
> [   30.173329] Registration of powernv driver failed.
>
> Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>

The previous version is in linux-next already and I'm going to push it
for merging shortly.

> ---
>  drivers/cpuidle/sysfs.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
> index c5adc8c..f2c3bce 100644
> --- a/drivers/cpuidle/sysfs.c
> +++ b/drivers/cpuidle/sysfs.c
> @@ -615,6 +615,18 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
>         struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
>         int error;
>
> +       /*
> +        * Return error if cpu_device is not setup for this cpu.  This
> +        * could happen if arch did not setup cpu_device since this
> +        * cpu is not in cpu_present mask and the driver did not send
> +        * correct cpu mask at registration.  Without this check we
> +        * would end up passing bogus value for &cpu_dev->kobj in
> +        * kobject_init_and_add().
> +        */
> +
> +       if (!cpu_dev)
> +               return -ENODEV;
> +
>         kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
>         if (!kdev)
>                 return -ENOMEM;
> --
> 2.9.3
>
Vaidyanathan Srinivasan March 23, 2017, 3:40 p.m. UTC | #2
* Rafael J. Wysocki <rafael@kernel.org> [2017-03-23 16:27:31]:

> On Thu, Mar 23, 2017 at 4:22 PM, Vaidyanathan Srinivasan
> <svaidy@linux.vnet.ibm.com> wrote:
> > If a given cpu is not in cpu_present and cpu hotplug
> > is disabled, arch can skip setting up the cpu_dev.
> >
> > Arch cpuidle driver should pass correct cpu mask
> > for registration, but failing to do so by the driver
> > causes error to propagate and crash like this:
> >
> > [   30.076045] Unable to handle kernel paging request for
> >                                 data at address 0x00000048
> > [   30.076100] Faulting instruction address: 0xc0000000007b2f30
> > cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
> >     pc: c0000000007b2f30: kobject_get+0x20/0x70
> >     lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
> >     sp: c000003feb18b8f0
> >    msr: 9000000000009033
> >    dar: 48
> >  dsisr: 40000000
> >   current = 0xc000003fd2ed8300
> >   paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
> >     pid   = 1, comm = swapper/0
> > Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
> > 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
> > enter ? for help
> > [c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
> > [c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
> > [c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
> > [c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
> > [c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
> > [c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
> > [c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
> > [c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
> > [c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
> > [c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74
> >
> > Validating cpu_dev fixes the crash and reports correct error message like:
> >
> > [   30.163506] Failed to register cpuidle device for cpu136
> > [   30.173329] Registration of powernv driver failed.
> >
> > Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
> 
> The previous version is in linux-next already and I'm going to push it
> for merging shortly.

Thanks Rafael.  The previous version is good for merge.

--Vaidy
diff mbox

Patch

diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index c5adc8c..f2c3bce 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -615,6 +615,18 @@  int cpuidle_add_sysfs(struct cpuidle_device *dev)
 	struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
 	int error;
 
+	/*
+	 * Return error if cpu_device is not setup for this cpu.  This
+	 * could happen if arch did not setup cpu_device since this
+	 * cpu is not in cpu_present mask and the driver did not send
+	 * correct cpu mask at registration.  Without this check we
+	 * would end up passing bogus value for &cpu_dev->kobj in
+	 * kobject_init_and_add().
+	 */
+
+	if (!cpu_dev)
+		return -ENODEV;
+
 	kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
 	if (!kdev)
 		return -ENOMEM;