@@ -58,56 +58,40 @@ module_param(pxa27x_maxfreq, uint, 0);
MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
"(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
+struct pxa_cpufreq_data {
+ struct clk *clk_core;
+};
+static struct pxa_cpufreq_data pxa_cpufreq_data;
+
struct pxa_freqs {
unsigned int khz;
- unsigned int membus;
- unsigned int cccr;
- unsigned int div2;
- unsigned int cclkcfg;
int vmin;
int vmax;
};
-/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF 64 /* standard 64ms SDRAM */
-static unsigned int sdram_rows;
-
-#define CCLKCFG_TURBO 0x1
-#define CCLKCFG_FCS 0x2
-#define CCLKCFG_HALFTURBO 0x4
-#define CCLKCFG_FASTBUS 0x8
-#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK 0xFFF
-
-#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
-#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
-
/*
* PXA255 definitions
*/
-/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
-#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS
-
static const struct pxa_freqs pxa255_run_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
- { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
- {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */
- {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */
- {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */
- {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */
- {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */
+ /* CPU MEMBUS run turbo PXbus SDRAM */
+ { 99500, -1, -1}, /* 99, 99, 50, 50 */
+ {132700, -1, -1}, /* 133, 133, 66, 66 */
+ {199100, -1, -1}, /* 199, 199, 99, 99 */
+ {265400, -1, -1}, /* 265, 265, 133, 66 */
+ {331800, -1, -1}, /* 331, 331, 166, 83 */
+ {398100, -1, -1}, /* 398, 398, 196, 99 */
};
/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
static const struct pxa_freqs pxa255_turbo_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
- { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
- {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */
- {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */
- {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */
- {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */
+ /* CPU run turbo PXbus SDRAM */
+ { 99500, -1, -1}, /* 99, 99, 50, 50 */
+ {199100, -1, -1}, /* 99, 199, 50, 99 */
+ {298500, -1, -1}, /* 99, 287, 50, 99 */
+ {298600, -1, -1}, /* 199, 287, 99, 99 */
+ {398100, -1, -1}, /* 199, 398, 99, 99 */
};
#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
@@ -122,47 +106,14 @@ static unsigned int pxa255_turbo_table;
module_param(pxa255_turbo_table, uint, 0);
MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
-/*
- * PXA270 definitions
- *
- * For the PXA27x:
- * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
- *
- * A = 0 => memory controller clock from table 3-7,
- * A = 1 => memory controller clock = system bus clock
- * Run mode frequency = 13 MHz * L
- * Turbo mode frequency = 13 MHz * L * N
- * System bus frequency = 13 MHz * L / (B + 1)
- *
- * In CCCR:
- * A = 1
- * L = 16 oscillator to run mode ratio
- * 2N = 6 2 * (turbo mode to run mode ratio)
- *
- * In CCLKCFG:
- * B = 1 Fast bus mode
- * HT = 0 Half-Turbo mode
- * T = 1 Turbo mode
- *
- * For now, just support some of the combinations in table 3-7 of
- * PXA27x Processor Family Developer's Manual to simplify frequency
- * change sequences.
- */
-#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
-#define CCLKCFG2(B, HT, T) \
- (CCLKCFG_FCS | \
- ((B) ? CCLKCFG_FASTBUS : 0) | \
- ((HT) ? CCLKCFG_HALFTURBO : 0) | \
- ((T) ? CCLKCFG_TURBO : 0))
-
static struct pxa_freqs pxa27x_freqs[] = {
- {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
- {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
- {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
- {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
- {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
- {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
- {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
+ {104000, 900000, 1705000 },
+ {156000, 1000000, 1705000 },
+ {208000, 1180000, 1705000 },
+ {312000, 1250000, 1705000 },
+ {416000, 1350000, 1705000 },
+ {520000, 1450000, 1705000 },
+ {624000, 1550000, 1705000 }
};
#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
@@ -241,51 +192,29 @@ static void pxa27x_guess_max_freq(void)
}
}
-static void init_sdram_rows(void)
-{
- uint32_t mdcnfg = __raw_readl(MDCNFG);
- unsigned int drac2 = 0, drac0 = 0;
-
- if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
- drac2 = MDCNFG_DRAC2(mdcnfg);
-
- if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
- drac0 = MDCNFG_DRAC0(mdcnfg);
-
- sdram_rows = 1 << (11 + max(drac0, drac2));
-}
-
-static u32 mdrefr_dri(unsigned int freq)
-{
- u32 interval = freq * SDRAM_TREF / sdram_rows;
-
- return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
-}
-
static unsigned int pxa_cpufreq_get(unsigned int cpu)
{
- return get_clk_frequency_khz(0);
+ struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
+
+ return (unsigned int) clk_get_rate(data->clk_core) / 1000;
}
static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
{
struct cpufreq_frequency_table *pxa_freqs_table;
const struct pxa_freqs *pxa_freq_settings;
- unsigned long flags;
- unsigned int new_freq_cpu, new_freq_mem;
- unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+ struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
+ unsigned int new_freq_cpu;
int ret = 0;
/* Get the current policy */
find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
new_freq_cpu = pxa_freq_settings[idx].khz;
- new_freq_mem = pxa_freq_settings[idx].membus;
if (freq_debug)
- pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
- new_freq_cpu / 1000, (pxa_freq_settings[idx].div2) ?
- (new_freq_mem / 2000) : (new_freq_mem / 1000));
+ pr_debug("Changing CPU frequency from %d Mhz to %d Mhz\n",
+ policy->cur / 1000, new_freq_cpu / 1000);
if (vcc_core && new_freq_cpu > policy->cur) {
ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
@@ -293,53 +222,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
return ret;
}
- /* Calculate the next MDREFR. If we're slowing down the SDRAM clock
- * we need to preset the smaller DRI before the change. If we're
- * speeding up we need to set the larger DRI value after the change.
- */
- preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
- if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
- preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
- preset_mdrefr |= mdrefr_dri(new_freq_mem);
- }
- postset_mdrefr =
- (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
-
- /* If we're dividing the memory clock by two for the SDRAM clock, this
- * must be set prior to the change. Clearing the divide must be done
- * after the change.
- */
- if (pxa_freq_settings[idx].div2) {
- preset_mdrefr |= MDREFR_DB2_MASK;
- postset_mdrefr |= MDREFR_DB2_MASK;
- } else {
- postset_mdrefr &= ~MDREFR_DB2_MASK;
- }
-
- local_irq_save(flags);
-
- /* Set new the CCCR and prepare CCLKCFG */
- writel(pxa_freq_settings[idx].cccr, CCCR);
- cclkcfg = pxa_freq_settings[idx].cclkcfg;
-
- asm volatile(" \n\
- ldr r4, [%1] /* load MDREFR */ \n\
- b 2f \n\
- .align 5 \n\
-1: \n\
- str %3, [%1] /* preset the MDREFR */ \n\
- mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
- str %4, [%1] /* postset the MDREFR */ \n\
- \n\
- b 3f \n\
-2: b 1b \n\
-3: nop \n\
- "
- : "=&r" (unused)
- : "r" (MDREFR), "r" (cclkcfg),
- "r" (preset_mdrefr), "r" (postset_mdrefr)
- : "r4", "r5");
- local_irq_restore(flags);
+ clk_set_rate(data->clk_core, new_freq_cpu * 1000);
/*
* Even if voltage setting fails, we don't report it, as the frequency
@@ -369,8 +252,6 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
pxa_cpufreq_init_voltages();
- init_sdram_rows();
-
/* set default policy and cpuinfo */
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
@@ -429,11 +310,17 @@ static struct cpufreq_driver pxa_cpufreq_driver = {
.init = pxa_cpufreq_init,
.get = pxa_cpufreq_get,
.name = "PXA2xx",
+ .driver_data = &pxa_cpufreq_data,
};
static int __init pxa_cpu_init(void)
{
int ret = -ENODEV;
+
+ pxa_cpufreq_data.clk_core = clk_get_sys(NULL, "core");
+ if (IS_ERR(pxa_cpufreq_data.clk_core))
+ return PTR_ERR(pxa_cpufreq_data.clk_core);
+
if (cpu_is_pxa25x() || cpu_is_pxa27x())
ret = cpufreq_register_driver(&pxa_cpufreq_driver);
return ret;