diff mbox

[v2] thermal: qcom: tsens: Allow number of sensors to come from DT

Message ID 20180602193211.25731-1-bjorn.andersson@linaro.org (mailing list archive)
State Not Applicable, archived
Delegated to: Eduardo Valentin
Headers show

Commit Message

Bjorn Andersson June 2, 2018, 7:32 p.m. UTC
For platforms that has multiple copies of the TSENS hardware block it's
convenient to specify the number of sensors per block in DeviceTree.

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org> [binding]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- Added comment as suggested by Amit
- Picked up Amit and Rob's R-b

 .../devicetree/bindings/thermal/qcom-tsens.txt      |  1 +
 drivers/thermal/qcom/tsens.c                        | 13 ++++++++++---
 2 files changed, 11 insertions(+), 3 deletions(-)

Comments

Bjorn Andersson June 2, 2018, 7:38 p.m. UTC | #1
On Sat 02 Jun 12:32 PDT 2018, Bjorn Andersson wrote:

> For platforms that has multiple copies of the TSENS hardware block it's
> convenient to specify the number of sensors per block in DeviceTree.
> 
> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org> [binding]
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Please ignore, after sending this I saw that Eduardo picked up v1
yesterday.

Thanks Eduardo,
Bjorn

> ---
> 
> Changes since v1:
> - Added comment as suggested by Amit
> - Picked up Amit and Rob's R-b
> 
>  .../devicetree/bindings/thermal/qcom-tsens.txt      |  1 +
>  drivers/thermal/qcom/tsens.c                        | 13 ++++++++++---
>  2 files changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 292ed89d900b..06195e8f35e2 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -8,6 +8,7 @@ Required properties:
>  
>  - reg: Address range of the thermal registers
>  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> +- #qcom,sensors: Number of sensors in tsens block
>  - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
>  nvmem cells
>  
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 3f9fe6aa51cc..b212bebcfc36 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -116,6 +116,7 @@ static int tsens_probe(struct platform_device *pdev)
>  	struct tsens_device *tmdev;
>  	const struct tsens_data *data;
>  	const struct of_device_id *id;
> +	u32 num_sensors;
>  
>  	if (pdev->dev.of_node)
>  		dev = &pdev->dev;
> @@ -130,18 +131,24 @@ static int tsens_probe(struct platform_device *pdev)
>  	else
>  		data = &data_8960;
>  
> -	if (data->num_sensors <= 0) {
> +	num_sensors = data->num_sensors;
> +
> +	/* Override driver provided num_sensors, if specified in DT */
> +	if (np)
> +		of_property_read_u32(np, "#qcom,sensors", &num_sensors);
> +
> +	if (num_sensors <= 0) {
>  		dev_err(dev, "invalid number of sensors\n");
>  		return -EINVAL;
>  	}
>  
>  	tmdev = devm_kzalloc(dev, sizeof(*tmdev) +
> -			     data->num_sensors * sizeof(*s), GFP_KERNEL);
> +			     num_sensors * sizeof(*s), GFP_KERNEL);
>  	if (!tmdev)
>  		return -ENOMEM;
>  
>  	tmdev->dev = dev;
> -	tmdev->num_sensors = data->num_sensors;
> +	tmdev->num_sensors = num_sensors;
>  	tmdev->ops = data->ops;
>  	for (i = 0;  i < tmdev->num_sensors; i++) {
>  		if (data->hw_ids)
> -- 
> 2.17.0
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 292ed89d900b..06195e8f35e2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -8,6 +8,7 @@  Required properties:
 
 - reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- #qcom,sensors: Number of sensors in tsens block
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 3f9fe6aa51cc..b212bebcfc36 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -116,6 +116,7 @@  static int tsens_probe(struct platform_device *pdev)
 	struct tsens_device *tmdev;
 	const struct tsens_data *data;
 	const struct of_device_id *id;
+	u32 num_sensors;
 
 	if (pdev->dev.of_node)
 		dev = &pdev->dev;
@@ -130,18 +131,24 @@  static int tsens_probe(struct platform_device *pdev)
 	else
 		data = &data_8960;
 
-	if (data->num_sensors <= 0) {
+	num_sensors = data->num_sensors;
+
+	/* Override driver provided num_sensors, if specified in DT */
+	if (np)
+		of_property_read_u32(np, "#qcom,sensors", &num_sensors);
+
+	if (num_sensors <= 0) {
 		dev_err(dev, "invalid number of sensors\n");
 		return -EINVAL;
 	}
 
 	tmdev = devm_kzalloc(dev, sizeof(*tmdev) +
-			     data->num_sensors * sizeof(*s), GFP_KERNEL);
+			     num_sensors * sizeof(*s), GFP_KERNEL);
 	if (!tmdev)
 		return -ENOMEM;
 
 	tmdev->dev = dev;
-	tmdev->num_sensors = data->num_sensors;
+	tmdev->num_sensors = num_sensors;
 	tmdev->ops = data->ops;
 	for (i = 0;  i < tmdev->num_sensors; i++) {
 		if (data->hw_ids)