diff mbox

[v3,20/23] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon

Message ID 20180716144206.30985-21-miquel.raynal@bootlin.com (mailing list archive)
State Not Applicable, archived
Delegated to: Eduardo Valentin
Headers show

Commit Message

Miquel Raynal July 16, 2018, 2:42 p.m. UTC 
New bindings impose to declare the thermal IP from within a new syscon.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 14 ++++++++++----
 arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 18 ++++++++++++------
 2 files changed, 22 insertions(+), 10 deletions(-)
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 4f2a704615b0..45662fc09d18 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -258,10 +258,16 @@ 
 				};
 			};
 
-			ap_thermal: thermal@6f808c {
-				compatible = "marvell,armada-ap806-thermal";
-				reg = <0x6f808c 0x4>,
-				      <0x6f8084 0x8>;
+			ap_syscon1: system-controller@6f8000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x6f8000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				ap_thermal: thermal-sensor@80 {
+					compatible = "marvell,armada-ap806-thermal";
+					reg = <0x80 0x10>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index ab31ba20aa2a..1b813a95149c 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -177,12 +177,6 @@ 
 			interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		CP110_LABEL(thermal): thermal@400078 {
-			compatible = "marvell,armada-cp110-thermal";
-			reg = <0x400078 0x4>,
-			<0x400070 0x8>;
-		};
-
 		CP110_LABEL(syscon0): system-controller@440000 {
 			compatible = "syscon", "simple-mfd";
 			reg = <0x440000 0x2000>;
@@ -223,6 +217,18 @@ 
 			};
 		};
 
+		CP110_LABEL(syscon1): system-controller@400000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x400000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			CP110_LABEL(thermal): thermal-sensor@70 {
+				compatible = "marvell,armada-cp110-thermal";
+				reg = <0x70 0x10>;
+			};
+		};
+
 		CP110_LABEL(usb3_0): usb3@500000 {
 			compatible = "marvell,armada-8k-xhci",
 			"generic-xhci";