| Message ID | 20181116162403.49854-17-lkundrak@v3.sk (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add support for OLPC XO 1.75 Embedded Controller | expand |
Hi, On Fri, Nov 16, 2018 at 05:24:02PM +0100, Lubomir Rintel wrote: > This wouldn't work on the DT-based ARM platform. Let's read the EC version > directly from the EC driver instead. > > This makes the driver no longer x86 specific. > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > Acked-by: Pavel Machek <pavel@ucw.cz> > > --- > Changes since v1: > - Use uint8_t instead of unsigned char [1] for ecver > > drivers/power/supply/Kconfig | 2 +- > drivers/power/supply/olpc_battery.c | 35 +++++++++++++++++++++-------- > 2 files changed, 27 insertions(+), 10 deletions(-) > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index f27cf0709500..dd7ae1431098 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -151,7 +151,7 @@ config BATTERY_PMU > > config BATTERY_OLPC > tristate "One Laptop Per Child battery" > - depends on X86_32 && OLPC > + depends on OLPC > help > Say Y to enable support for the battery on the OLPC laptop. > > diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c > index 4433eb10a23d..ec5dfb8fcb8a 100644 > --- a/drivers/power/supply/olpc_battery.c > +++ b/drivers/power/supply/olpc_battery.c > @@ -20,8 +20,6 @@ > #include <linux/jiffies.h> > #include <linux/sched.h> > #include <linux/olpc-ec.h> > -#include <asm/olpc.h> > - > > #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ > #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */ > @@ -57,6 +55,7 @@ struct olpc_battery_data { > struct power_supply *olpc_ac; > struct power_supply *olpc_bat; > char bat_serial[17]; > + int new_proto; > }; > > /********************************************************************* > @@ -100,7 +99,7 @@ static const struct power_supply_desc olpc_ac_desc = { > static int olpc_bat_get_status(struct olpc_battery_data *data, > union power_supply_propval *val, uint8_t ec_byte) > { > - if (olpc_platform_info.ecver > 0x44) { > + if (data->new_proto) { > if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE)) > val->intval = POWER_SUPPLY_STATUS_CHARGING; > else if (ec_byte & BAT_STAT_DISCHARGING) > @@ -608,14 +607,32 @@ static int olpc_battery_probe(struct platform_device *pdev) > struct power_supply_config psy_cfg = {}; > struct olpc_battery_data *data; > uint8_t status; > + uint8_t ecver; > + int ret; > + > + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + platform_set_drvdata(pdev, data); This ended up in the wrong patch. Otherwise Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> -- Sebastian > + /* See if the EC is already there and get the EC revision */ > + ret = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, &ecver, 1); > + if (ret) { > + if (ret == -ENODEV) > + return -EPROBE_DEFER; > + return ret; > + } > > - /* > - * We've seen a number of EC protocol changes; this driver requires > - * the latest EC protocol, supported by 0x44 and above. > - */ > - if (olpc_platform_info.ecver < 0x44) { > + if (ecver > 0x44) { > + /* XO 1 or 1.5 with a new EC firmware. */ > + data->new_proto = 1; > + } else if (ecver < 0x44) { > + /* > + * We've seen a number of EC protocol changes; this driver > + * requires the latest EC protocol, supported by 0x44 and above. > + */ > printk(KERN_NOTICE "OLPC EC version 0x%02x too old for " > - "battery driver.\n", olpc_platform_info.ecver); > + "battery driver.\n", ecver); > return -ENXIO; > } > > -- > 2.19.1 >
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index f27cf0709500..dd7ae1431098 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -151,7 +151,7 @@ config BATTERY_PMU config BATTERY_OLPC tristate "One Laptop Per Child battery" - depends on X86_32 && OLPC + depends on OLPC help Say Y to enable support for the battery on the OLPC laptop. diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c index 4433eb10a23d..ec5dfb8fcb8a 100644 --- a/drivers/power/supply/olpc_battery.c +++ b/drivers/power/supply/olpc_battery.c @@ -20,8 +20,6 @@ #include <linux/jiffies.h> #include <linux/sched.h> #include <linux/olpc-ec.h> -#include <asm/olpc.h> - #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */ @@ -57,6 +55,7 @@ struct olpc_battery_data { struct power_supply *olpc_ac; struct power_supply *olpc_bat; char bat_serial[17]; + int new_proto; }; /********************************************************************* @@ -100,7 +99,7 @@ static const struct power_supply_desc olpc_ac_desc = { static int olpc_bat_get_status(struct olpc_battery_data *data, union power_supply_propval *val, uint8_t ec_byte) { - if (olpc_platform_info.ecver > 0x44) { + if (data->new_proto) { if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE)) val->intval = POWER_SUPPLY_STATUS_CHARGING; else if (ec_byte & BAT_STAT_DISCHARGING) @@ -608,14 +607,32 @@ static int olpc_battery_probe(struct platform_device *pdev) struct power_supply_config psy_cfg = {}; struct olpc_battery_data *data; uint8_t status; + uint8_t ecver; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + platform_set_drvdata(pdev, data); + + /* See if the EC is already there and get the EC revision */ + ret = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, &ecver, 1); + if (ret) { + if (ret == -ENODEV) + return -EPROBE_DEFER; + return ret; + } - /* - * We've seen a number of EC protocol changes; this driver requires - * the latest EC protocol, supported by 0x44 and above. - */ - if (olpc_platform_info.ecver < 0x44) { + if (ecver > 0x44) { + /* XO 1 or 1.5 with a new EC firmware. */ + data->new_proto = 1; + } else if (ecver < 0x44) { + /* + * We've seen a number of EC protocol changes; this driver + * requires the latest EC protocol, supported by 0x44 and above. + */ printk(KERN_NOTICE "OLPC EC version 0x%02x too old for " - "battery driver.\n", olpc_platform_info.ecver); + "battery driver.\n", ecver); return -ENXIO; }