diff mbox series

[v2,17/17] power: supply: olpc_battery: Add OLPC XO 1.75 support

Message ID 20181116162403.49854-18-lkundrak@v3.sk (mailing list archive)
State Not Applicable, archived
Headers show
Series Add support for OLPC XO 1.75 Embedded Controller | expand

Commit Message

Lubomir Rintel Nov. 16, 2018, 4:24 p.m. UTC 
The battery and the protocol are essentially the same as OLPC XO 1.5,
but the responses from the EC are LSB first.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

---
Changes since v1:
- s/s16 ecword_to_cpu/u16 ecword_to_cpu/
- s/u16 ec_byte/u16 ec_word/

 drivers/power/supply/olpc_battery.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

Comments

Darren Hart Dec. 2, 2018, 11:34 p.m. UTC | #1 
On Fri, Nov 16, 2018 at 05:24:03PM +0100, Lubomir Rintel wrote:
> The battery and the protocol are essentially the same as OLPC XO 1.5,
> but the responses from the EC are LSB first.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> Acked-by: Pavel Machek <pavel@ucw.cz>
> 
> ---
> Changes since v1:
> - s/s16 ecword_to_cpu/u16 ecword_to_cpu/
> - s/u16 ec_byte/u16 ec_word/
> 
>  drivers/power/supply/olpc_battery.c | 23 ++++++++++++++++++-----
>  1 file changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c

...

> @@ -626,6 +635,10 @@ static int olpc_battery_probe(struct platform_device *pdev)
>  	if (ecver > 0x44) {
>  		/* XO 1 or 1.5 with a new EC firmware. */
>  		data->new_proto = 1;
> +	} else if (of_find_compatible_node(NULL, NULL, "olpc,xo1.75-ec")) {

This if/else blocks concerns me a bit, but I might just be missing some
context.

This tests both ecver as well as the OF compatible string, is this reliable? Do
we know that for all xo1.75-ec compatible nodes the ecver will be <= 0x44? Or,
is ecver undefined? If the latter, then perhaps this test should be performed
first?

if (of_find_compatible_node....x01.75-ec...)
	...
else if (ecver > 0x44)
	...
else
	...

And what happens when ecver == 0x44? We test for > and < but not ==, <=,
or >= in this block

> +		/* XO 1.75 */
> +		data->new_proto = 1;
> +		data->little_endian = 1;
>  	} else if (ecver < 0x44) {
>  		/*
>  		 * We've seen a number of EC protocol changes; this driver
> -- 
> 2.19.1
> 
>
Lubomir Rintel Jan. 7, 2019, 6:02 p.m. UTC | #2 
On Sun, 2018-12-02 at 15:34 -0800, Darren Hart wrote:
> On Fri, Nov 16, 2018 at 05:24:03PM +0100, Lubomir Rintel wrote:
> > The battery and the protocol are essentially the same as OLPC XO 1.5,
> > but the responses from the EC are LSB first.
> > 
> > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > Acked-by: Pavel Machek <pavel@ucw.cz>
> > 
> > ---
> > Changes since v1:
> > - s/s16 ecword_to_cpu/u16 ecword_to_cpu/
> > - s/u16 ec_byte/u16 ec_word/
> > 
> >  drivers/power/supply/olpc_battery.c | 23 ++++++++++++++++++-----
> >  1 file changed, 18 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
> 
> ...
> 
> > @@ -626,6 +635,10 @@ static int olpc_battery_probe(struct platform_device *pdev)
> >  	if (ecver > 0x44) {
> >  		/* XO 1 or 1.5 with a new EC firmware. */
> >  		data->new_proto = 1;
> > +	} else if (of_find_compatible_node(NULL, NULL, "olpc,xo1.75-ec")) {
> 
> This if/else blocks concerns me a bit, but I might just be missing some
> context.
> 
> This tests both ecver as well as the OF compatible string, is this reliable? Do
> we know that for all xo1.75-ec compatible nodes the ecver will be <= 0x44? Or,
> is ecver undefined? If the latter, then perhaps this test should be performed
> first?
> 
> if (of_find_compatible_node....x01.75-ec...)
> 	...
> else if (ecver > 0x44)
> 	...
> else
> 	...
> 
> And what happens when ecver == 0x44? We test for > and < but not ==, <=,
> or >= in this block

You're right, the conditionals are not correct. On XO 1.75 the
versioning is different (now at level 0x05) and uninteresting,
therefore the XO 1.75 check needs to go first.

On XO 1 and XO 1.75, we don't support < 0x44. 0x44 is okay, though uses
stays with an old protocol, and > 0x44 uses a new protocol.

Will follow up with a new version of the patch soon.

> 
> > +		/* XO 1.75 */
> > +		data->new_proto = 1;
> > +		data->little_endian = 1;
> >  	} else if (ecver < 0x44) {
> >  		/*
> >  		 * We've seen a number of EC protocol changes; this driver
> > -- 
> > 2.19.1

Thanks
Lubo
diff mbox series

Patch

diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
index ec5dfb8fcb8a..898e8a6128bb 100644
--- a/drivers/power/supply/olpc_battery.c
+++ b/drivers/power/supply/olpc_battery.c
@@ -56,6 +56,7 @@  struct olpc_battery_data {
 	struct power_supply *olpc_bat;
 	char bat_serial[17];
 	int new_proto;
+	int little_endian;
 };
 
 /*********************************************************************
@@ -321,6 +322,14 @@  static int olpc_bat_get_voltage_max_design(union power_supply_propval *val)
 	return ret;
 }
 
+static u16 ecword_to_cpu(struct olpc_battery_data *data, u16 ec_word)
+{
+	if (data->little_endian)
+		return le16_to_cpu(ec_word);
+	else
+		return be16_to_cpu(ec_word);
+}
+
 /*********************************************************************
  *		Battery properties
  *********************************************************************/
@@ -393,7 +402,7 @@  static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		val->intval = (s16)be16_to_cpu(ec_word) * 9760L / 32;
+		val->intval = ecword_to_cpu(data, ec_word) * 9760L / 32;
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
@@ -401,7 +410,7 @@  static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		val->intval = (s16)be16_to_cpu(ec_word) * 15625L / 120;
+		val->intval = ecword_to_cpu(data, ec_word) * 15625L / 120;
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
 		ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &ec_byte, 1);
@@ -432,21 +441,21 @@  static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		val->intval = (s16)be16_to_cpu(ec_word) * 10 / 256;
+		val->intval = ecword_to_cpu(data, ec_word) * 10 / 256;
 		break;
 	case POWER_SUPPLY_PROP_TEMP_AMBIENT:
 		ret = olpc_ec_cmd(EC_AMB_TEMP, NULL, 0, (void *)&ec_word, 2);
 		if (ret)
 			return ret;
 
-		val->intval = (int)be16_to_cpu(ec_word) * 10 / 256;
+		val->intval = (int)ecword_to_cpu(data, ec_word) * 10 / 256;
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
 		ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
 		if (ret)
 			return ret;
 
-		val->intval = (s16)be16_to_cpu(ec_word) * 6250 / 15;
+		val->intval = ecword_to_cpu(data, ec_word) * 6250 / 15;
 		break;
 	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
 		ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
@@ -626,6 +635,10 @@  static int olpc_battery_probe(struct platform_device *pdev)
 	if (ecver > 0x44) {
 		/* XO 1 or 1.5 with a new EC firmware. */
 		data->new_proto = 1;
+	} else if (of_find_compatible_node(NULL, NULL, "olpc,xo1.75-ec")) {
+		/* XO 1.75 */
+		data->new_proto = 1;
+		data->little_endian = 1;
 	} else if (ecver < 0x44) {
 		/*
 		 * We've seen a number of EC protocol changes; this driver