@@ -586,6 +586,7 @@ struct sched_dl_entity {
* @bucket_id: clamp bucket corresponding to the "requested" value
* @effective: clamp value and bucket actually "assigned" to the se
* @active: the se is currently refcounted in a rq's bucket
+ * @user_defined: the requested clamp value comes from user-space
*
* Both bucket_id and effective::bucket_id are the index of the clamp bucket
* matching the corresponding clamp value which are pre-computed and stored to
@@ -594,12 +595,20 @@ struct sched_dl_entity {
* The active bit is set whenever a task has got an effective::value assigned,
* which can be different from the user requested clamp value. This allows to
* know a task is actually refcounting the rq's effective::bucket_id bucket.
+ *
+ * The user_defined bit is set whenever a task has got a task-specific clamp
+ * value requested from userspace, i.e. the system defaults apply to this task
+ * just as a restriction. This allows to relax default clamps when a less
+ * restrictive task-specific value has been requested, thus allowing to
+ * implement a "nice" semantic. For example, a task running with a 20%
+ * default boost can still drop its own boosting to 0%.
*/
struct uclamp_se {
/* Clamp value "requested" by a scheduling entity */
unsigned int value : bits_per(SCHED_CAPACITY_SCALE);
unsigned int bucket_id : bits_per(UCLAMP_BUCKETS);
unsigned int active : 1;
+ unsigned int user_defined : 1;
/*
* Clamp value "obtained" by a scheduling entity.
*
@@ -53,10 +53,20 @@
#define SCHED_FLAG_RECLAIM 0x02
#define SCHED_FLAG_DL_OVERRUN 0x04
#define SCHED_FLAG_KEEP_POLICY 0x08
+#define SCHED_FLAG_KEEP_PARAMS 0x10
+#define SCHED_FLAG_UTIL_CLAMP_MIN 0x20
+#define SCHED_FLAG_UTIL_CLAMP_MAX 0x40
+
+#define SCHED_FLAG_KEEP_ALL (SCHED_FLAG_KEEP_POLICY | \
+ SCHED_FLAG_KEEP_PARAMS)
+
+#define SCHED_FLAG_UTIL_CLAMP (SCHED_FLAG_UTIL_CLAMP_MIN | \
+ SCHED_FLAG_UTIL_CLAMP_MAX)
#define SCHED_FLAG_ALL (SCHED_FLAG_RESET_ON_FORK | \
SCHED_FLAG_RECLAIM | \
SCHED_FLAG_DL_OVERRUN | \
- SCHED_FLAG_KEEP_POLICY)
+ SCHED_FLAG_KEEP_ALL | \
+ SCHED_FLAG_UTIL_CLAMP)
#endif /* _UAPI_LINUX_SCHED_H */
@@ -9,6 +9,7 @@ struct sched_param {
};
#define SCHED_ATTR_SIZE_VER0 48 /* sizeof first published struct */
+#define SCHED_ATTR_SIZE_VER1 56 /* add: util_{min,max} */
/*
* Extended scheduling parameters data structure.
@@ -21,8 +22,33 @@ struct sched_param {
* the tasks may be useful for a wide variety of application fields, e.g.,
* multimedia, streaming, automation and control, and many others.
*
- * This variant (sched_attr) is meant at describing a so-called
- * sporadic time-constrained task. In such model a task is specified by:
+ * This variant (sched_attr) allows to define additional attributes to
+ * improve the scheduler knowledge about task requirements.
+ *
+ * Scheduling Class Attributes
+ * ===========================
+ *
+ * A subset of sched_attr attributes specifies the
+ * scheduling policy and relative POSIX attributes:
+ *
+ * @size size of the structure, for fwd/bwd compat.
+ *
+ * @sched_policy task's scheduling policy
+ * @sched_nice task's nice value (SCHED_NORMAL/BATCH)
+ * @sched_priority task's static priority (SCHED_FIFO/RR)
+ *
+ * Certain more advanced scheduling features can be controlled by a
+ * predefined set of flags via the attribute:
+ *
+ * @sched_flags for customizing the scheduler behaviour
+ *
+ * Sporadic Time-Constrained Tasks Attributes
+ * ==========================================
+ *
+ * A subset of sched_attr attributes allows to describe a so-called
+ * sporadic time-constrained task.
+ *
+ * In such model a task is specified by:
* - the activation period or minimum instance inter-arrival time;
* - the maximum (or average, depending on the actual scheduling
* discipline) computation time of all instances, a.k.a. runtime;
@@ -34,14 +60,8 @@ struct sched_param {
* than the runtime and must be completed by time instant t equal to
* the instance activation time + the deadline.
*
- * This is reflected by the actual fields of the sched_attr structure:
+ * This is reflected by the following fields of the sched_attr structure:
*
- * @size size of the structure, for fwd/bwd compat.
- *
- * @sched_policy task's scheduling policy
- * @sched_flags for customizing the scheduler behaviour
- * @sched_nice task's nice value (SCHED_NORMAL/BATCH)
- * @sched_priority task's static priority (SCHED_FIFO/RR)
* @sched_deadline representative of the task's deadline
* @sched_runtime representative of the task's runtime
* @sched_period representative of the task's period
@@ -53,6 +73,28 @@ struct sched_param {
* As of now, the SCHED_DEADLINE policy (sched_dl scheduling class) is the
* only user of this new interface. More information about the algorithm
* available in the scheduling class file or in Documentation/.
+ *
+ * Task Utilization Attributes
+ * ===========================
+ *
+ * A subset of sched_attr attributes allows to specify the utilization
+ * expected for a task. These attributes allow to inform the scheduler about
+ * the utilization boundaries within which it should schedule tasks. These
+ * boundaries are valuable hints to support scheduler decisions on both task
+ * placement and frequency selection.
+ *
+ * @sched_util_min represents the minimum utilization
+ * @sched_util_max represents the maximum utilization
+ *
+ * Utilization is a value in the range [0..SCHED_CAPACITY_SCALE]. It
+ * represents the percentage of CPU time used by a task when running at the
+ * maximum frequency on the highest capacity CPU of the system. For example, a
+ * 20% utilization task is a task running for 2ms every 10ms.
+ *
+ * A task with a min utilization value bigger than 0 is more likely scheduled
+ * on a CPU with a capacity big enough to fit the specified value.
+ * A task with a max utilization value smaller than 1024 is more likely
+ * scheduled on a CPU with no more capacity than the specified value.
*/
struct sched_attr {
__u32 size;
@@ -70,6 +112,11 @@ struct sched_attr {
__u64 sched_runtime;
__u64 sched_deadline;
__u64 sched_period;
+
+ /* Utilization hints */
+ __u32 sched_util_min;
+ __u32 sched_util_max;
+
};
#endif /* _UAPI_LINUX_SCHED_TYPES_H */
@@ -1027,6 +1027,50 @@ int sysctl_sched_uclamp_handler(struct ctl_table *table, int write,
return result;
}
+static int uclamp_validate(struct task_struct *p,
+ const struct sched_attr *attr)
+{
+ unsigned int lower_bound = p->uclamp[UCLAMP_MIN].value;
+ unsigned int upper_bound = p->uclamp[UCLAMP_MAX].value;
+
+ if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MIN)
+ lower_bound = attr->sched_util_min;
+ if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MAX)
+ upper_bound = attr->sched_util_max;
+
+ if (lower_bound > upper_bound)
+ return -EINVAL;
+ if (upper_bound > SCHED_CAPACITY_SCALE)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void __setscheduler_uclamp(struct task_struct *p,
+ const struct sched_attr *attr)
+{
+ if (likely(!(attr->sched_flags & SCHED_FLAG_UTIL_CLAMP)))
+ return;
+
+ if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MIN) {
+ unsigned int lower_bound = attr->sched_util_min;
+
+ p->uclamp[UCLAMP_MIN].user_defined = true;
+ p->uclamp[UCLAMP_MIN].value = lower_bound;
+ p->uclamp[UCLAMP_MIN].bucket_id =
+ uclamp_bucket_id(lower_bound);
+ }
+
+ if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MAX) {
+ unsigned int upper_bound = attr->sched_util_max;
+
+ p->uclamp[UCLAMP_MAX].user_defined = true;
+ p->uclamp[UCLAMP_MAX].value = upper_bound;
+ p->uclamp[UCLAMP_MAX].bucket_id =
+ uclamp_bucket_id(upper_bound);
+ }
+}
+
static void uclamp_fork(struct task_struct *p)
{
unsigned int clamp_id;
@@ -1073,6 +1117,13 @@ static void __init init_uclamp(void)
#else /* CONFIG_UCLAMP_TASK */
static inline void uclamp_rq_inc(struct rq *rq, struct task_struct *p) { }
static inline void uclamp_rq_dec(struct rq *rq, struct task_struct *p) { }
+static inline int uclamp_validate(struct task_struct *p,
+ const struct sched_attr *attr)
+{
+ return -ENODEV;
+}
+static void __setscheduler_uclamp(struct task_struct *p,
+ const struct sched_attr *attr) { }
static inline void uclamp_fork(struct task_struct *p) { }
static inline void init_uclamp(void) { }
#endif /* CONFIG_UCLAMP_TASK */
@@ -4441,6 +4492,13 @@ static void __setscheduler_params(struct task_struct *p,
static void __setscheduler(struct rq *rq, struct task_struct *p,
const struct sched_attr *attr, bool keep_boost)
{
+ /*
+ * If params cannot change we don't allow scheduling class
+ * changes too.
+ */
+ if (attr->sched_flags & SCHED_FLAG_KEEP_PARAMS)
+ return;
+
__setscheduler_params(p, attr);
/*
@@ -4578,6 +4636,13 @@ static int __sched_setscheduler(struct task_struct *p,
return retval;
}
+ /* Update task specific "requested" clamps */
+ if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP) {
+ retval = uclamp_validate(p, attr);
+ if (retval)
+ return retval;
+ }
+
/*
* Make sure no PI-waiters arrive (or leave) while we are
* changing the priority of the task:
@@ -4607,6 +4672,8 @@ static int __sched_setscheduler(struct task_struct *p,
goto change;
if (dl_policy(policy) && dl_param_changed(p, attr))
goto change;
+ if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP)
+ goto change;
p->sched_reset_on_fork = reset_on_fork;
task_rq_unlock(rq, p, &rf);
@@ -4687,7 +4754,9 @@ static int __sched_setscheduler(struct task_struct *p,
put_prev_task(rq, p);
prev_class = p->sched_class;
+
__setscheduler(rq, p, attr, pi);
+ __setscheduler_uclamp(p, attr);
if (queued) {
/*
@@ -4863,6 +4932,10 @@ static int sched_copy_attr(struct sched_attr __user *uattr, struct sched_attr *a
if (ret)
return -EFAULT;
+ if ((attr->sched_flags & SCHED_FLAG_UTIL_CLAMP) &&
+ size < SCHED_ATTR_SIZE_VER1)
+ return -EINVAL;
+
/*
* XXX: Do we want to be lenient like existing syscalls; or do we want
* to be strict and return an error on out-of-bounds values?
@@ -4939,10 +5012,15 @@ SYSCALL_DEFINE3(sched_setattr, pid_t, pid, struct sched_attr __user *, uattr,
rcu_read_lock();
retval = -ESRCH;
p = find_process_by_pid(pid);
- if (p != NULL)
- retval = sched_setattr(p, &attr);
+ if (likely(p))
+ get_task_struct(p);
rcu_read_unlock();
+ if (likely(p)) {
+ retval = sched_setattr(p, &attr);
+ put_task_struct(p);
+ }
+
return retval;
}
@@ -5093,6 +5171,11 @@ SYSCALL_DEFINE4(sched_getattr, pid_t, pid, struct sched_attr __user *, uattr,
else
attr.sched_nice = task_nice(p);
+#ifdef CONFIG_UCLAMP_TASK
+ attr.sched_util_min = p->uclamp[UCLAMP_MIN].value;
+ attr.sched_util_max = p->uclamp[UCLAMP_MAX].value;
+#endif
+
rcu_read_unlock();
retval = sched_read_attr(uattr, &attr, size);
The SCHED_DEADLINE scheduling class provides an advanced and formal model to define tasks requirements that can translate into proper decisions for both task placements and frequencies selections. Other classes have a more simplified model based on the POSIX concept of priorities. Such a simple priority based model however does not allow to exploit most advanced features of the Linux scheduler like, for example, driving frequencies selection via the schedutil cpufreq governor. However, also for non SCHED_DEADLINE tasks, it's still interesting to define tasks properties to support scheduler decisions. Utilization clamping exposes to user-space a new set of per-task attributes the scheduler can use as hints about the expected/required utilization for a task. This allows to implement a "proactive" per-task frequency control policy, a more advanced policy than the current one based just on "passive" measured task utilization. For example, it's possible to boost interactive tasks (e.g. to get better performance) or cap background tasks (e.g. to be more energy/thermal efficient). Introduce a new API to set utilization clamping values for a specified task by extending sched_setattr(), a syscall which already allows to define task specific properties for different scheduling classes. A new pair of attributes allows to specify a minimum and maximum utilization the scheduler can consider for a task. Do that by checking and validating the required clamp values before and then applying the required changes using _the_ same pattern already in use for __setscheduler(). This ensures that the task is re-enqueued with the new clamp values. Do not allow to change sched class specific params and non class specific params (i.e. clamp values) at the same time. This keeps things simple and still works for the most common cases since we are usually interested in just one of the two actions. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> --- Changes in v7: Message-ID: <20190124123814.GM13777@hirez.programming.kicks-ass.net> - split validation code from actual state changing code - for state changing code, use _the_ same pattern __setscheduler() and other code already use, i.e. dequeue-change-enqueue - add SCHED_FLAG_KEEP_PARAMS and use it to skip __setscheduler() when policy and params are not specified --- include/linux/sched.h | 9 ++++ include/uapi/linux/sched.h | 12 ++++- include/uapi/linux/sched/types.h | 65 ++++++++++++++++++++---- kernel/sched/core.c | 87 +++++++++++++++++++++++++++++++- 4 files changed, 161 insertions(+), 12 deletions(-)